References
- G. Y. Ha and H. G. Jo : KSAE, "Tensile Properties and Microstructures in Al-Mg Alloys for Automobile Body Panels", (1993) 5-3
- K. T. Kim and J. M. Kim : Mater. Sci. Eng, "Effect of alloying elements on the Strength and Casting Characteristics of High Strength Al-Zn-Mg-Cu Alloys", (2005) 475-479
- M. C. Flemings : McGraw-Hill, "Solidification Processing", 219-224 (1974)
- M. Di. Sabatino : NTNU, "Fluidity of Aluminium foundry alloys", 76 (2005)
- J. Campbell: Castings, 2nd Ed., Oxford, (2003) 75-87
- J. K. Back and H. W. Kwon : J. Mater. Sci Technol, "Effcet of Squeeze Cast Process Parameters on Fluidity of Hypereutectic Al-Si Alloy", 48 (2008) 1
- J. M. Kim and K. D. Seong : J. KFS, "Effects of Mn and Si Contents on the Castabilities and Mechanical Properties of Al-5%Mg Base Alloys, (2005.10)
- Y. D. Kwon and Z. H. Lee : Mater. Sic. Eng. A, "The effect of grain refining and oxide inclusion on the fluidity of Al-4.5Cu-0.6Mn and A356 alloys", 360 (2003) 372-376 https://doi.org/10.1016/S0921-5093(03)00504-5
- K. R. Ravi and R. M. Pillai : J. Alloys and Compounds, "Fluidity of aluminum alloys and composites", (2008) 201-210
- William W. Scott : The Materials Information Soc, "Aluminum and Aluminum Alloys", 570-571
- D. Y. Lee and B. W. Cheon : J. KFS, "The effect of the Metallic Mold Cooling System on the Solidification Structures and the Mechanical Properties for Al-10%Si Alloy Castings", 13 (1993) 2
- S. D. Son and C. Y. Jo : J. KFS, "Dendrite Arm Spacing and Carbide Morphology with Thermal Gradient and Solidification Rate in Directionally Solidified Ni-base Superalloy", 27 (2007) 2
- J. R. Pereira and M. De Lourdes : J. Amme, "Analysis of permeability of interdendritic channels during solidification of aluminum magnesium alloys", 31 (2008) 1
- K. Nogita and A. K. Dahle : Scr. Mater, "Effects of boron on eutectic modification of hypoeutectic Al-Si alloys", 48 (2003) 307-313 https://doi.org/10.1016/S1359-6462(02)00381-0
Cited by
- Effects of Alloying Elements on the Properties of High Strength and High Thermal Conductivity Al-Zn-Mg-Fe Alloy for Die Casting vol.33, pp.4, 2013, https://doi.org/10.7777/jkfs.2013.33.4.171
- Effects of Zn and Mg Amounts on the Properties of High Thermal Conductivity Al-Zn-Mg-Fe Alloys for Die Casting vol.33, pp.3, 2013, https://doi.org/10.7777/jkfs.2013.33.3.113
- 개량 Al-6.5Si 합금의 미세조직, 인장 및 충격 인성에 미치는 합금 원소 첨가의 영향 vol.29, pp.3, 2020, https://doi.org/10.5228/kstp.2020.29.3.135