Journal of Technologic Dentistry (대한치과기공학회지)

Korean Academy of Dental Technology (대한치과기공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Colors of Zirconia and Veneering Ceramics

지르코니아와 전장용 세라믹의 색상에 관한 연구

  • Kim, Sa-Hak (Dept. of Dental Laboratory Technology, Dong-U College)
  • Received : 2012.04.14
  • Accepted : 2012.06.26
  • Published : 2012.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

Purpose: This study was conducted to investigate the colors of zirconia and veneered ceramics according to the build-up method of veneer porcelain. Methods: The samples were divided into three groups: a group for which a liner was applied to the zirconia surface and dentine coating was built up and burned (Cz1), a group for which the dentine coating was directly built up and burned (Cz2), and a group for which the samples were wash-burned with dentine coating and a dentine coating was built up and burned again (Cz3). The the colors were measured with a Spectrophoto-meter. Results: The average $L^*$ value of the Cz3 group was the highest among the groups at $59.1{\pm}0.5$ (P<0.05), followed by Cz2 at $57.5{\pm}0.8$ and Cz1 at $56.6{\pm}1.3$. The $a^*$ value of Cz3 was negative at $-0.0{\pm}0.0$ and the $a^*$ values of Cz2 and Cz1 were positive at $0.2{\pm}0.1$ and $0.4{\pm}0.0$, respectively (P<0.05). The $b^*$ of Cz1 was the highest at $11.2{\pm}0.6$, followed by Cz3 at $10.8{\pm}0.5$ and Cz2 at $10.5{\pm}0.8$ (P<0.05). Conclusion: Compared to other experimental groups, the Cz3 groups showed the brightest colors with high brightness and relatively low green and yellow levels.

Keywords

References

  1. 김공주. 색채과학. 대광서림, 54-80, 1986.
  2. 염미옥, 이종혁, 신수연, 신승철, 조자원. 지르코니아 코어의 종류와 도재 두께에 따른 색상의 변화. 대한치과기공학회지, 32(4), 341-350, 2010.
  3. 오선미, 이채현. 지르코니아 코어의 두께에 따른 변색치와 메탈 포스트의 색조차단 효과. 대한치과기공학회지, 32(4), 327-335, 2010.
  4. Christel P, Meunier A, Heller M, Torre JP, Peille CN. Mechanical properties and short-term in-vivo evalution of yttrium-oxide-partially-stabilized zirconia. J Biomed Mater Res, 23, 45-61, 1989. https://doi.org/10.1002/jbm.820230105
  5. Corciolani G, Vichi A, Louca C, Ferrari M. Influence of layering thickness on the color parameters of a ceramic system. Dent mater 26, 737-742, 2010. https://doi.org/10.1016/j.dental.2010.03.018
  6. Dozic A, Kleverlaan CJ, Meegdes M, van der Zel J, Feilzer AJ. The influence of porcelain layer thickness on the final shade of ceramic restoration. J Prosthet Dent 90, 563-570, 2003. https://doi.org/10.1016/S0022-3913(03)00517-1
  7. Garvie RC, Hannink RH, Pascoe RT. Ceramic steel. Nature, 258, 703-704, 1975. https://doi.org/10.1038/258703a0
  8. Jalali H, Alizadeh ES, Sadighpour L, Shabestari Go, Fard MJ. The Effect of background and ceramic thickness on the color of an all-ceramic restorative system. J Calif Dent Assoc 38, 179-186, 2010.
  9. Holand W. Materials science fundamentals of the IPS Empress 2 glass-ceramic. Ivoclar-Vivadent-Report, 12, 3-10, 1998.
  10. Kern M, Wegner SM. Bonding to zirconia ceramic : adhesion methods and their durability. Dent Mater, 14, 64-71, 1998. https://doi.org/10.1016/S0109-5641(98)00011-6
  11. Luthardt R, Weber A, Rudolph H, Schone C, Quaas S, Walter M. Design and production of dental prosthetic restorations: basic research on dental CAD/CAM technology. Int J Comput Dent, 5(2-3), 165-76, 2002.
  12. Luthardt RG, Sandkuhl O, Reitz B. Zirconia-TZP and alumina-advance technologies for the manufacturing of single crowns. Eur J Prosthodont Restor Dent, 7(4), 113-119, 1999.
  13. Miyagawa Y, Powers JM. Prediction of an esthetics restoeative material. J Dent Res, 62, 581-587, 1983. https://doi.org/10.1177/00220345830620051601
  14. Oh SC, Dong JK, Luthy H, Scharer P. Strength and microsctructure of IPS Empress 2 glass-ceramic after different heat treatments. Int J Prosthodont, 13, 468-472, 2000.
  15. Stevenson B, Ibbetson R. The effect of the substructure on the colour of samples/restorations veneered with ceramic: a literature review. J Dent 38, 361-368. 2010. https://doi.org/10.1016/j.jdent.2010.01.009
  16. Seghi RR, Johnston WM, O'Brien W: Spetrophotometric analysis of color difference between procelain systens. J Prosthet Dent 54, 625-627, 1985. https://doi.org/10.1016/0022-3913(85)90235-5
  17. Vichi A, Ferrari M, Davidson CL. Influence of ceramic and cement thickness on the masking of various types of opaque posts. J Prosthet Dent 83, 412-417, 2000. https://doi.org/10.1016/S0022-3913(00)70035-7
  18. Wohlwend A, Studer S, Scharer P. The zirconium oxide abutment: an all-ceramic abutment for the esthetic improvement of implant superstructures. Quintessence Dent Technol, 1, 63-74, 1997.