Abstract
This study incorporates welders and generators needed to use it and welder generators to be used as is to configure the system. Thus in order to propose an integrated system to prevent the rapid charging process to manage the power state information, system configuration is the most important. Therefore, the battery charging output port, the main input and output control ports, the generator control port, a warning alarm buzzer, UI switch input, EXT power output, check the battery status input, battery charge and discharge current, UI input control switch, generator status, the main power input and output, the output voltage, EXT warning output, DEBUG communication, UI display unit, an external input ADC units with a focus on generator control system was implemented.
본 연구는 용접기와 발전기를 통합하여 필요에 따라 발전기로 사용하다가 용접기로 사용할 수 있도록 시스템을 구성하는 것이다. 이와 같이 통합 시스템을 제안하기 위해서는 급속충전이 진행되지 않도록 전력 상태 정보를 관리하는 시스템 구성이 가장 중요하다. 따라서 배터리충전 출력포트, 메인 입출력제어포트, 발전기제어포트, 경고 알람부저, UI스위치 입력부, EXT 전원 출력부, 배터리 상태 확인 입력부, 배터리별 충방전 전류 확인부, UI 조정스위치 입력부, 발전기 상태 확인부, 메인전원 입출력 확인부(전압,전류), 출력전압 확인부, EXT 경고 출력부, DEBUG 통신부, UI 디스플레이부, 외부입력부ADC 등을 중심으로 발전기 제어 시스템을 구현하였다.