한국안전학회지 (Journal of the Korean Society of Safety)

  • 제27권2호
  • /
  • Pages.84-91
  • /
  • 2012
  • /
  • 1738-3803(pISSN)
  • /
  • 2383-9953(eISSN)
한국안전학회 (The Korean Society of Safety)
권호 표지
DOI QR코드

DOI QR Code

외륜 수레 손잡이 설계 변수의 변화에 따른 밀기, 들기, 회전 힘 평가

Evaluation of the Pushing, Lifting and Twisting Forces According to the Handle Design Variables of the Single-Wheel Barrows

  • 송영웅 (대구가톨릭대학교 산업보건학과) ;
  • 김경아 (대구가톨릭대학교 산업보건학과) ;
  • 이호철 (대구가톨릭대학교 기계자동차공학부)
  • Song, Young-Woong (Department of Occupational Health, Catholic University of Daegu) ;
  • Kim, Kyoung-Ah (Department of Occupational Health, Catholic University of Daegu) ;
  • Lee, Ho-Cheol (School of Mechanical and Automotive Engineering, Catholic University of Daegu)
  • 투고 : 2011.11.22
  • 심사 : 2012.02.20
  • 발행 : 2012.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study evaluated three forces (lifting, pushing and twisting) required to maneuver the single-wheel barrows according to handle height, width, horizontal angle and vertical angle. The four independent variables were varied in two levels. Handle height was varies in two levels : 'knuckle height (KH)' and 'KH + 0.1 ${\times}$ stature'. The two handle widths were '1.5 ${\times}$ shoulder width (SW)' and '1.75 ${\times}$ SW'. Two angles of $0^{\circ}$ and $15^{\circ}$ were used for horizontal and vertical angles. The 24 factorial design was used in the experiment. Twelve healthy male students (undergraduate and graduate) participated in the experiment. Subjects exerted three forces (pushing, lifting, and twisting clockwise) in each experimental condition. The order of 16 treatment conditions was determined randomly. Results showed that the effects of the four factors were different according to three forces. While lifting and twisting forces were higher in 'knuckle height', the pushing force was higher in 'KH + 0.1 ${\times}$ stature' (p < 0.05). Lifting and pushing forces showed higher values in the horizontal angle $0^{\circ}$ than in $15^{\circ}$. Handle width and vertical angle showed no statistically significant main effects on three forces (p > 0.05). Results of this study could be used as basic data for the ergonomic design of handle variables of one- or two-wheel barrows.

키워드

참고문헌

  1. A.Choobineh, G. Sani and M. Rohani, "Perceived demands and musculoskeletal symptoms among employees of an Iranian petrochemical industry", International Journal of Industrial Ergonomics, Vol. 39, pp. 766-770, 2009. https://doi.org/10.1016/j.ergon.2009.01.001
  2. "2010년도 산업재해현황분석", 한국산업안전공단, 2011.
  3. "2009년도 산업재해현황분석", 한국산업안전공단, 2010.
  4. "2008년도 산업재해현황분석", 한국산업안전공단, 2009.
  5. J. Faucett, M. Garry, D. Nadler and D. Ettare, "A test of two training interventions to prevent work-related musculoskeletal disorders of the upper extremity", Applied Ergonomics, Vol 33, pp. 337-347, 2002. https://doi.org/10.1016/S0003-6870(02)00006-6
  6. D. Roffey, E, Wai, P. Bishop, B. Kwon and S. Dagenais, "Causal assessment of workplace manual handling or assisting patients and low back pain: results of a systematic review", The Spine Jorunal, Vol. 10. pp. 639-651, 2010.
  7. J. Kuiper, A. Burdorf, J. Verbeek, M. Frings-Dresen, A. van der Beek, E. Viikari-Juntura, "Epidemiologic evidence on manual materials handling as a risk factor for back disorders:a systematic review", International Journal of Industrial Ergonomics, Volume 24, pp. 389-404, 1999. https://doi.org/10.1016/S0169-8141(99)00006-2
  8. O. Okunribido, M. Magnusson, M. Pope, "Delivery drivers and low-back pain: A study of the exposures to posture demands, manual materials handling and wholebody vibration", International Journal of Industrial Ergonomics, Volume 36, pp. 265-273, 2006. https://doi.org/10.1016/j.ergon.2005.10.003
  9. Cal/OSHA, "Ergonomic guidelines for manual material handling", California Department of Industrial Relations, 2007.
  10. U. Glitsch, H.J. Ottersbach, R. Ellegast, K. Schaub, G. Franz and M. Jäger, "Physical Workload of Fligt Attendants when Pushing and Pulling Trolleys aboard Aircraft", International Journal of Industrial Ergonomics, Vol. 37, pp. 84-854, 2007.
  11. B. Das, J. Wimpee and B. Das, "Ergonomics Evaluation and Redesign of a Hospital Meal Cart", Applied Ergonomics, Vol. 33, pp. 309-318, 2002. https://doi.org/10.1016/S0003-6870(02)00018-2
  12. C.L. Lin, M.S. Chen, Y.L. Wei and M.J.J. Wand, "The Evaluation of Force Exertions and Muscle Activities when Operating a Manual Guided Vehicle", Applied Ergonomics, Vol. 41, pp. 313-318, 2010. https://doi.org/10.1016/j.apergo.2009.08.005
  13. O.O. Okunribido and C.M. Haslegrave, "Effect of Handle Design for Cylinder Trolleys", Applied Ergonomics, Vol. 30, pp. 407-419, 1999. https://doi.org/10.1016/S0003-6870(98)00053-2
  14. B. Laursen and B. Schibye, "The Effect of Different Surfaces on Biomechanical Loading of Shoulder andLumbar Spine during Pushing and Pulling of Two- Wheeled Containers", Applied Ergonomics, Vol. 33, pp. 167-174, 2002. https://doi.org/10.1016/S0003-6870(01)00054-0
  15. 김경아, 송영웅, 이호철, "외륜운반차 설계변수조사에 근거한 근력측정시스템 설계", 2010년 대한산업공학회 추계학술대회 논문집, 2010.
  16. 김경아, 이호철, 송영웅, "손잡이 간격, 높이, 수평 각도가 손수레 운전에 필요한 밀기, 들기, 회전 힘에 미치는 영향", 한국안전학회지, 제26권, pp. 58-64, 2011.
  17. M.P. de Looze, K. van Greuningen, J. Rebel, I. Kingma and P.P.F.M. Kuijer, "Force Direction and Physical Load in Dynamic Pushing and Pulling", Ergonomics, Vol. 43, pp. 377-390, 2000. https://doi.org/10.1080/001401300184477