DOI QR코드

DOI QR Code

Evaluation of Flexural Capacity of Ultra-High Strength Fiber Reinforced Concrete Members

초고강도 섬유보강 콘크리트 부재의 휨강도 산정

  • Received : 2012.02.02
  • Published : 2012.05.25

Abstract

In this study, experiments on ultra-high-strength steel fiber reinforced concrete beams with 2% volume fraction of steel fiber had been conducted. Test was conducted by two point loading with 2,000kN actuator for slender beam specimen. Shear-span to depth ratio was 6 intending the flexural failure. For the flexural design of ultra-high strength fiber reinforced concrete member an empirical equation had been proposed. Improving accuracy of empirical equation, 9 possible stress distributions for concrete section was compared with test results. For the reliability of empirical equation, these models were compared with experiment results conducted with previous researches. As a results of comparative study, the most exact solution was the model that use the real stress distribution of ultra-high strength fiber reinforced concrete. However, more safer prediction was possible using stress block parameters that was proposed by the study results of ultra-high strength concrete and tensile stress distribution that was considered the debonding properties of fiber.

Keywords

Acknowledgement

Supported by : 한국과학재단

References

  1. P. Richard, M. Cheyrezy, Composition of Reactive Powder Concrete, Cement andConcrete Reseazrch, 25(7), pp.1501-1511, 1995 https://doi.org/10.1016/0008-8846(95)00144-2
  2. Schmidt M., Fehling E., Ultra-Hochfester Beton - Planung und Bau der ersten Brucke mit UHPC in Europa, Tagungs beitrage zu den 3. Kassler Baustoff-und Massivbautagen, pp. 118, Kassel, 2003.
  3. Mark Rebentrost, Gavin Wight, Experience and Applications of Ultra-high Performance Concrete in Asia, Proceedings of the Second International Symposium on Ultra High Performance Concrete, Kassel, Germany, pp.19-30. 2008
  4. Orange G., Dugat J., Acker P., DUCTAL: New Ultra High Performance Concretes. Damage, Resistance and Micromechanical Analysis, BEFIB 2000, Fifth RILEM Symposium on Fiber-Reinforced Concretes (FRC), pp. 781-790, 2000
  5. Obata, K., Sugano, S., Araki, H., Shirai, K. Kimura, H., Murakami, Y., Kiakaze, N., An experimental study on the compressive properties of super-high-strength concrete, Summary of Technical Papers of Annual Meeting of Architectural Institute of Japan, Vol. C-2, pp.13-14, 2003
  6. Benjamin A. Graybeal, Compressive behavior of Ultra-High-Performance Fiber-Reinforced Concrete, ACI Material Journal, 104(2), pp.146-152, 2007
  7. Japan Society of Civil Engineers, Recommendations for Design and Construction of High Performance Fiber Reinforced Cement Composites with Multiple Fine Cracks (HPFRCC), Concrete Engineering Series 82, pp.9-31, 2008
  8. AFGC Groupe de travail BFUP, ed., SETRA -AFGC Ultra High Performance Fiber-Reinforced Concretes. Interim Recommendations, 2002
  9. RILEM, Final recommendations of TC 162-TDF, Test and design methods for steel fibre reinforced concrete, ${\sigma}-{\varepsilon}$ design method, Materials and Structures, 36, pp.560-565, 2003
  10. American Concrete Institute Committee 544, Design Considerations for Steel Fiber Reinforced Concrete, American Concrete Institute, pp.1-18, 1988
  11. Henager, C. H., Ultimate Strength of Reinforced Steel fibrous concrete Beams, Proceedings, conference on Fiber-Reinforced Materials:Design and Engineering Applications, Institution of Civil Engineers, London, pp.165-173, 1977
  12. Imam M, Vandewalle L, Mortelmans F., Shear-moment analysis of reinforced high strength concrete beams containing steel fibers. Canadian Journal of Civil engineering, 22, p p.462-470, 1995. https://doi.org/10.1139/l95-054
  13. Lim TY, Paramasivan P, Lee SL., Shear and moment capacity of reinforced steel fiber concrete beams, Magazine of Concrete Research, 39(140), pp.148-160, 1987 https://doi.org/10.1680/macr.1987.39.140.148
  14. 배백일, 최현기, 최창식, 반응성 분체 콘크리트(RPC) 부재의 직사각형 응력블록 계수, 대한건축학회(심사완료), 2012