참고문헌
- Ahmad, S.H., Shah, S.P. (1982) Complete Triaxial Stress-Strain Curves for Concrete, J. Struct. Div., ASCE, 108, pp.728-742.
- Charles, R.W., Cameron, B., Brown, C.B. (1999) Composite Action in Concrete Filled Tubes, Journal of Structural Engineering, ASCE, 25(5), pp.477-484.
- Chaudhary, S., Pendharkar, U., Nagpal, A.K. (2007) A Hybrid Procedure for Cracking, Creep, Shrinkage and Thermal Gradient in Continuous Composite Bridges, Latin American Journal of Solids and Structures, 4(3), pp.203-227.
- Chaudhary, S., Pendharkar, U., Nagpal, A.K. (2009) Control of Creep and Shrinkage Effects in Steel Concrete Composite Bridges with Precast Decks, Journal of Bridge Engineering, ASCE, 14(5), pp.336-345. https://doi.org/10.1061/(ASCE)1084-0702(2009)14:5(336)
- Choi, E.S., Kim, M.C. (2008) A New Steel Jacketing Method for Concrete Cylinders and Comparison of the Results with a Constitutive Model, International Journal of Railway, 2008, 1(2), pp.72-81.
- Chou C.C., Hsu C.P. (2008) Hysteretic Model Development and Seismic Response of Unbounded Post-Tensioned Precast CFT Segmental Bridge Columns, Earthquake Engineering and Structural Dynamics, 2008, 37, pp.919-934. https://doi.org/10.1002/eqe.796
- Elchalakani, M., Zhao, X.L., Grzebieta, R.H. (2001) Concrete-Filled Circular Steel Tubes Subjected to Pure Bending, Journal of Constructional Steel Research, 57, pp.1141-1168. https://doi.org/10.1016/S0143-974X(01)00035-9
- Giannopoulos, G., Vantomme, J., Wastiels, J., Taerwe, L. (2003) Numerical Analysis and Experimental Validation for Static Loads of a Composite Bridge Structure, Journal of Composite Structures, 62, pp.235-243. https://doi.org/10.1016/S0263-8223(03)00118-1
- Huang, C.S., Yeh, Y.K., Liu, G.Y., Hu, H.T., Tsai, K.C., Weng, Y.T., Wang, S.H., Wu, M.H. (2002) Axial Load Behavior of Stiffened Concrete-Filled Steel Columns, Journal of Structural Engineering, ASCE, 128, pp.1222-1230. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:9(1222)
- Jeong, M.C., Yi, S.A., Kong, J.S. (2009) Linear Behavior Analysis and Stability Assessment of CFTA Girder, 2009 Conference of Computational Structural Engineering Institute of Korea.
- Kosteski, N., Packer, J.A., Puthli, R.S. (2003) A Finite Element Method Based Yield Load Determination Procedure for Hollow Structural Section Connections, Journal of Constructional Steel Research, 59(4), pp.453-471. https://doi.org/10.1016/S0143-974X(02)00066-4
- Lee, H., Park, K.H., Kong, J.S. (2008) Analysis of Static Behavior of CFTA Girder, The Fourth International Conference on Bridge Maintenance, Safety and Management (IABMAS'08), Seoul, Korea, July 13-17.
- Lu, H., Han, L.H., Zhao, X.L. (2009) Analytical Behavior of Circular Concrete-Filled Thin-Walled Steel Tubes Subjected to Bending, Thin-Walled Structures, 47, pp.346-358. https://doi.org/10.1016/j.tws.2008.07.004
- Nakamura, Sh.I., Momiyama, Y., Hosaka, T., Homma, K. (2002) New Technologies of Steel/Concrete Composite Bridge, Journal of Constructional Steel Research, 58, pp.99-130. https://doi.org/10.1016/S0143-974X(01)00030-X
- Nakamura, Sh.I., Tanaka, H., Kato, K. (2008) Static Analysis of Cable-Stayed Bridge with CFT Arch Ribs, Journal of Constructional Steel Research, 65, pp.776-783.
- Roh, H., Hong, S., Lee, S., Park, K., Lee, J.S. (2009) Dynamic Amplification Factor of Concrete Filled Tubular Arch (CFTA) Girder due to the Effects of Moving Vehicles and PT Tendons, 2011 Conference of Computational Structural Engineering Institute of Korea.
- Trung, T.T., Kim, J.H., Park, K.H., Kong, J.S. (2008) Dynamic Behavior and Reliability Assessment of a CFTA girder subjected to Truck Collision, International Journal of Steel Structures, 8(4), pp.315-324.
- Varma, A.H., Ricles, J.M., Sause R., Lu, L.W. (2002) Experimental Behavior of High Strength Square Concrete-Filled Steel Tube Beam-Columns, Journal of Structural Engineering, ASCE, 1285(3), pp.309-418.
피인용 문헌
- Dynamic Amplification of Tied-Arch Girder due to Variations of Rise Ratio and Vehicle Moving Speed vol.14, pp.5, 2014, https://doi.org/10.9798/KOSHAM.2014.14.5.49