The KSFM Journal of Fluid Machinery (한국유체기계학회 논문집)

Korean Society for Fluid machinery (한국유체기계학회)
권호 표지
DOI QR코드

DOI QR Code

Operating Characteristics Study of a Small Gas/Steam Turbine Combined System Using Biogas

바이오가스 연료를 사용하는 소형 가스/증기터빈 복합 발전 시스템의 성능특성 해석

  • Received : 2011.09.26
  • Accepted : 2012.01.25
  • Published : 2012.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study analyzed the influence of firing biogas on the performance and operation of a gas/steam turbine combined system. A reference gas/steam turbine combined system, designed with biogas fuel(57% volumetric methane) was set up and off-design simulation was made to investigate operating characteristics when a couple of operating schemes to mitigate turbine blade overheating were applied. Performance at base-load operation using each scheme was compared and part load operation using the variable inlet guide vane was analysed. Also, differences in operating characteristics and performance caused by changes in the methane content of biogas and ambient temperature were examined.

Keywords

References

  1. Bruno, J. C. and Coronas, A,. 2004, "Distributed Generation of Energy Using Micro Gas Turbines : Polygeneration Systems and Fuel Flexibility," Proceedings of the International Conference on Renewable Energy and Power Quality (ICREPQ'04).
  2. Lepszy, S. and Chmielniak, T., 2008, "Analysis of The Biomass Integrated Combined Cycles with Two Different Structures of Gas Turbines," ASME paper GT2008-50317.
  3. Rodrigues M, Walter A and Faaij A, 2007, "Performance Evaluation of Atmospheric Biomass Integrated Gasifier Combined Cycle Systems Under Different Strategies for The Use of Low Calorific Gases," Energy Coversion and Management. Vol. 48, pp. 1289-1301. https://doi.org/10.1016/j.enconman.2006.09.016
  4. Colantoni, S., Gatta, S. D., De Prosperis, R., Russo, A., Fantozzi, F. and Desideri, U., 2009, "Gas Turbine Fired with Biomass Pyrolysis Syngas : Analysis of The Overheating of Hot Gas Path Components."
  5. Enter Software. GateCycle ver 6.0, 2006.
  6. 최승주, 2006, "두산중공업의 소형가스터빈 개발," 기계저널, 제46권, 제10호, pp. 41-47.
  7. Palmer, C. A. and Erbes, M. R., 1994, "Simulation Methods Used to Analyze the Performance of the GE PG6541B Gas Turbine Utilizing Low Heating Value Fuels," ASME IGTI Cogen-Turbo, IGTI-Vol. 9 pp. 337 -346.
  8. Spencer, R. G., Cotton, K. C. and Cannon, C. N., 1963, "A Method for Predicting the Performance of Steam Turbine-generators: 16,500kW and Larger," Journal of Engineering for Power, Vol. 85, pp. 249-252. https://doi.org/10.1115/1.3677341
  9. Bahadori, A. and Vuthaluru H. B., "Estimation of Performance of Steam Turbines Using a Simple Predictive Tool," Applied Thermal Engineering, Vol. 30, pp. 1832-1838.
  10. Erbes, M. R. and Gay, R. R., 1989, "GATE/CYCLE Predictions of the Off Design Performance of Combined Cycle Power Plants," Simulation of Thermal Energy Systems, ASME Winter Annual Meeting Vol. 124, pp. 43-51.
  11. 강도원, 이종준, 김동섭, 허광범, "바이오 가스를 사용하는 가스터빈 열병합 시스템의 전부하 및 부분부하 운전 특성 해석," 유체기계저널, 제14권, 제2호, pp.35-40.

Cited by

  1. Design and Performance Analysis for 3 MW Waste Pressure Steam Turbine Using 2D and 3D Numerical Simulation vol.38, pp.6, 2012, https://doi.org/10.7736/jkspe.020.115