References
- G. H. Bae, H. Huh, J. H. Song, S.H. Kim, 2006, Light-weight Design with a Simplified Center-pillar Model for Improved Crashworthiness, Trans. Kor. Soc. Auto. Eng., Vol. 14, No. 6, pp. 112-119.
- H. S. Choi, W. S. Lim, C. G. Kang, B. M. Kim, 2011, A Local Softening Method for Reducing Die Load and Increasing Service Life in Trimming of Hot Stamped Part, Trans. Mater. Process., Vol. 20 ,No. 6, pp. 427-431. https://doi.org/10.5228/KSTP.2011.20.6.427
- J. S. Lee, M. S. Chae, C. D. Park, Y. S. Kim, 2009, Mechanical and Forming Characteristics of High-Strength Boron-Alloyed Steel with Hot Forming, Trans. Mater. Process., Vol. 18, No. 3, pp. 236-244 https://doi.org/10.5228/KSPP.2009.18.3.236
- M. Merklein, L. Lechler, M. Geiger, 2006. Characterization of the Flow Properties of the Quenchenable Ultra High Strength Steel 22MnB5, CIRP Ann., Vol. 55, No. 1, pp. 229-233. https://doi.org/10.1016/S0007-8506(07)60404-1
- H. G. Kim, H. S. Son, S. H. Park, 2006, Development of Thermal-mechanical Coupled Simulation Skills for Hot Press Forming Tool Design, Posco Tech. Rep., Vol. 9, No. 1, pp. 117-125.
- K. Y. Kwon, B. S. Sin, C. G. Kang, 2010, The Effect of Forming Parameter on Mechanical Properties in Hot Bending Process of Boron Steel Sheet, Trans. Mater. Process., Vol. 19, No. 4, pp. 203-209. https://doi.org/10.5228/KSPP.2010.19.4.203
- Y. S. Suh, M. W. Ji, K. H. Lee․Y. S. Kim, 2010, Application and Verification of Virtual Manufacturing to Hot Press Forming Process with Boron Steel, Trans. Kor. Soc. Auto. Eng., Vol. 18, No. 2, pp. 61-66.
- R. Kolleck, R. Veit, M. Merklein, J. Lechler, M. Geiger, 2009, Investigation on Induction Heating for Hot Stamping of Boron Alloyed Steels, CIRP J. Manuf. Sci. Technol., Vol. 58, No. 1, pp. 275-278. https://doi.org/10.1016/j.cirp.2009.03.090
- N. H. Kim, C. G. Kang, 2010, The Prediction of Interfacial Heat Transfer Coefficient According to Contact Time and Pressure in Forging and Casting Die Materials for the Hot Press Forming, Trans. Mater. Process., Vol. 19, No. 6, pp.378-386. https://doi.org/10.5228/KSTP.2010.19.6.378
- S. H. Park, J. W. Yoon, D. Y. Yang, Y. H. Kim, 1999, Optimum Blank Design in Sheet Metal Forming by Deformation Path Iteration Method, Int. J. Mech. Sci., Vol. 41, No. 10, pp. 1217-1232. https://doi.org/10.1016/S0020-7403(98)00084-8
- T. W. Ku, H. J. Lim, H. H. Choi, S. M. Hwang, B. S. Kang, 2001, Implementation of Backward Tracing Scheme of The FEM to Blank Design in Sheet Metal Forming, J. Mater. Process. Technol., Vol. 111, No. 1-3, pp. 90-97. https://doi.org/10.1016/S0924-0136(01)00518-0
- K. Chung , J. W. Yoon, O. Richmond, 2000, Ideal Sheet Forming with Frictional Constraints, Int. J. Plast., Vol. 16, No. 6, pp. 595-610. https://doi.org/10.1016/S0749-6419(99)00068-6
- H. Naceur, Y. Q. Guo, J. L.Batoz, 2004, Blank Optimization in Sheet Metal Forming Using an Evolutionary Algorithm, J. Mater. Process. Technol., Vol. 151, No. 1-3, pp. 183-191. https://doi.org/10.1016/j.jmatprotec.2004.04.036
- X. Chen, R. Sowerby, 1996, Blank Development and The Prediction of Earing in Cup Drawing, Int. J. Mech. Sci., Vol. 38, No 5, pp. 509-516. https://doi.org/10.1016/0020-7403(95)00068-2
- R. Sowerby, J. L. Duncan, E. Chu, 1986, The Modeling of Sheet Metal Stampings, Int. J. Mech. Sci., Vol. 28, No. 5, pp. 415-430. https://doi.org/10.1016/0020-7403(86)90062-7
- H. Shim, K. Son, K Kim, 2000, Optimum Blank Shape Design by Sensitivity Analysis, J. Mater. Process. Technol., Vol. 104, No. 3, pp. 191-199. https://doi.org/10.1016/S0924-0136(00)00556-2
- K. Son, H. Shim, 2003, Optimal Blank Shape Design Using The Initial Velocity of Boundary Modes, J. Mater. Process. Technol., Vol. 134, No. 1, pp. 92-98. https://doi.org/10.1016/S0924-0136(02)00927-5
-
LSTC, 2009, LS-DYNA Ver. 971 User Manual
$^\ast$ MAT_106, LSTC, Seoul, Korea, pp. 398-400.
Cited by
- Development of the Compound Die Forming Technology United between Semi-Progressive and Transfer Die vol.14, pp.4, 2015, https://doi.org/10.14775/ksmpe.2015.14.4.126
- Effect of hot-stamping process conditions on the changes in material strength vol.16, pp.4, 2015, https://doi.org/10.1007/s12239-015-0063-9
- Non-isothermal Stamping Analysis of Automotive Seat Cushion Panel Using Mg Alloy Sheet vol.24, pp.5, 2016, https://doi.org/10.7467/KSAE.2016.24.5.605
- Research on Torsion Beam with High Strength Steel Materials Forming vol.723, 2016, https://doi.org/10.4028/www.scientific.net/KEM.723.136
- A Study on the Complex Automation Die Manufacturing Technology for an Automotive Seat Cushion Panel vol.23, pp.2, 2014, https://doi.org/10.5228/KSTP.2014.23.2.75