품질경영학회지 (Journal of Korean Society for Quality Management)

  • 제40권2호
  • /
  • Pages.117-125
  • /
  • 2012
  • /
  • 1229-1889(pISSN)
  • /
  • 2287-9005(eISSN)
한국품질경영학회 (Korean Society for Quality Management)
권호 표지
DOI QR코드

DOI QR Code

열화가 Wiener process를 따르는 경우의 비용을 고려한 가속열화시험 계획

Optimal Design of Accelerated Degradation Tests under the Constraint of Total Experimental Cost in the Case that the Degradation Characteristic Follows a Wiener Process

  • 투고 : 2012.04.10
  • 심사 : 2012.05.30
  • 발행 : 2012.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

For the highly reliable products, an accelerated degradation test (ADT) is a useful tool which has been employed in industry to obtain reliability-related information within an affordable amount of time and cost. In an ADT, as all other reliability tests, it is important to carefully design the ADT beforehand to obtain estimates of the quantities of interest as precisely as possible. In this paper, optimal ADTs are developed assuming that the constant-stress loading method is employed and the degradation characteristic follows a Wiener process. Under the constraint that the total cost does not exceed a pre-specified budget, the stress levels, the number of test units allocated to each stress level and the number of measurement (termination time) are determined such that the asymptotic variance of the maximum likelihood estimator of the q-th quantile of the lifetime distribution at the use condition is minimized.

키워드

참고문헌

  1. 서순근, 김갑석, 하천수(1998), "브라운 운동을 따르는 열화현상을 이용한 일정스트레스 가속수명시험의 최적 설계", 품질경영학회지, 26권, 1호, pp. 74-87.
  2. 이낙영(1995), "Optimum Design of Accelerated Degradation Tests for Lognormal Distribution", 품질경영학회지, 23권, 1호, pp. 29-40.
  3. 최규명, 이낙영(1996), "Optimum design of Accelerated Degradation Tests for Weibull Distribution", 품질경영학회지, 24권, 3호, pp. 37-49.
  4. Boulanger, M. and Escobar, L. A.(1994), "Experimental Design for a Class of Accelerated Degradation Tests", Technometrics, Vol. 36, No. 3, pp. 260-272. https://doi.org/10.1080/00401706.1994.10485803
  5. Chhikara, R. S. and Folks, J. L.(1989), The Inverse Gaussian Distribution, Marcel Dekker, New York.
  6. Li, Q. and Kececioglu, D. B.(2004), "Optimal Design of Accelerated Degradation Tests", International Journal of Materials and Product Technology, Vol. 20, No. 1-3, pp. 73-90. https://doi.org/10.1504/IJMPT.2004.003913
  7. Li, Q. and Kececioglu, D. B.(2006), "Design of an Optimal Plan for an Accelerated Degradation Test: A Case Study", International Journal of Quality and Reliability Management, Vol. 23, No. 4, pp. 426-440. https://doi.org/10.1108/02656710610657611
  8. Liao, C. M. and Tseng, S. T.(2006), "Optimal Design for Step-Stress Accelerated Degradation Tests", IEEE Transactions on Reliability, Vol. 55, No. 1, pp. 59-66. https://doi.org/10.1109/TR.2005.863811
  9. Lim, H. and Yum, B. J.(2011), "Optimal design of accelerated degradation tests based on Wiener process models", Journal of Applied Statistics, Vol. 38, No. 2, pp. 309-325. https://doi.org/10.1080/02664760903406488
  10. Lu, C. J. and Meeker, W. Q.(1993), "Using Degradaon Measures to Estimate a Time-to-Failure Distrution", Technometrics, Vol. 35, No. 2, pp. 161-174. https://doi.org/10.1080/00401706.1993.10485038
  11. Nelson, W.(1990), Accelerating Test: Statistical Models, Test Plans and Data Analysis, John Wiley & Sons, New York.
  12. Onar, A. and Padgett, W. J.(2000), "Accelerated Test Models with the Inverse Gaussian Distribution", Journal of Statistical Planning and Inference, Vol. 89, No. 1-2, pp. 119-133. https://doi.org/10.1016/S0378-3758(99)00214-1
  13. Park, J. I. and Yum, B. J.(1997), "Optimal Design of Accelerated Degradation Tests for Estimating Mean Lifetime at the Use Condition", Engineering Optimization, Vol. 28, No. 3, pp. 199-230. https://doi.org/10.1080/03052159708941132
  14. Park, S. J. and Yum, B. J.(2004), "Optimal Design of Step-Stress Degradation Tests in the Case of Destructive Measurement", Quality Technology and Quantitative Management, Vol. 1, No. 1, pp. 105-124. https://doi.org/10.1080/16843703.2004.11673067
  15. Tang, L. C., Yang, G. Y. and Xie, M.(2004), "Planning of Step-Stress Accelerated Degradation Test", The Annual Reliability and Maintainability Symposium, pp. 287-292.
  16. Tseng, S. T. and Peng, C. Y.(2007), "Stochastic Diffusion Modeling of Degradation Data", Journal of data Science, Vol. 5, pp. 315-333.
  17. Wu, S. J. and Chang, C. T.(2002), "Optimal Design of Degradation Tests in Presence of Cost Constraint", Reliability Engineering and System Safety, Vol. 76, No. 2, pp. 109-115. https://doi.org/10.1016/S0951-8320(01)00123-5
  18. Yu, H. F.(2003), "Designing an Accelerated Degradation Experiment by Optimizing the Estimation of the Percentile", Quality and Reliability Engineering International, Vol. 19, No. 3, pp. 197-214. https://doi.org/10.1002/qre.518
  19. Yu, H. F.(2006), "Designing an Accelerated Degradation Experiment with a Reciprocal Weibull Degradation Rate", Journal of Statistical Planning and Inference, Vol. 136, No. 2, pp. 282-297. https://doi.org/10.1016/j.jspi.2004.06.030

피인용 문헌

  1. Accelerated Degradation Test Planning Using the Inverse Gaussian Process vol.63, pp.3, 2014, https://doi.org/10.1109/TR.2014.2315773
  2. A literature review on planning and analysis of accelerated testing for reliability assessment vol.33, pp.8, 2017, https://doi.org/10.1002/qre.2195