초록
이산화탄소 포집 및 저장기술(Carbon Capture and Storage, CCS)은 발전소, 제철소 등의 대량의 배출원으로부터 포집된 이산화탄소를 압축공정, 정제공정, 수송공정을 거친 후, 지중의 안전한 지질구조 내에 수백, 수천년 이상 안정적으로 저장하는 기술이다. CCS 공정 중 이산화탄소에는 이산화탄소를 발생시키는 연소공정이나 포집 경제되는 공정에서 유입되는 불순물이 섞임으로서 혼합물을 이루게 된다. 혼합물의 성분으로는 대표적으로 $SO_2$, $H_2O$, CO, $N_2$, Ar, $O_2$, $H_2$ 등이 있으며 위 공정들에서 이산화탄소 혼합물에 포함된 불순물들은 전 공정에 영향을 미치게 된다. 본연구에서는 이산화탄소 혼합물 내 다양한 불순물이 수송공정에 미치는 영향을 실험적으로 평가할 수 있도록 혼합물이송공정 모의실험장치를 설계 제작하였으며 이산화탄소 혼합물의 이송공정에 질소불순물이 미치는 영향을 실험적으로 평가하였다. 각 실험조건 마다 증가율의 차이는 있으나 $N_2$비율이 증가할수록 $CO_2-N_2$ 혼합물의 질량유량당 압력강하량 및 비체적이 증가하는 경향을 보였다. 120 bar 및 100 bar 실험조건에서는 혼합물의 상태가 단상 초임계상태이었으며 $N_2$ 조성비 증가에 따른 비체적 및 질량유량당 압력강하 기울기가 크게 변하지 않음을 확인하였다. 70 bar 실험조건에서는 액상, 이상, 기상으로 혼합물의 상이 바뀌었으며 각 상에 따라 질량유량당 압력강하 및 비체적의 기울기가 달라짐을 확인하였다.
Carbon-dioxide capture and storage (CCS) process is consisted by capturing carbon-dioxide from large point source such as power plant and steel works, transporting and sequestrating captured $CO_2$ in a stable geological structure. During CCS process, it is inevitable of introducing impurities from combustion, capture and purification process into $CO_2$ stream. Impurities such as $SO_2$, $H_2O$, CO, $N_2$, Ar, $O_2$, $H_2$, can influence on process efficiency, capital expenditure, operation expense of CCS process. In this study, experimental apparatus is built to simulate the behavior of $CO_2$ transport under various impurity composition and process pressure condition. With this apparatus, $N_2$ impurity effect on $CO_2$ mixture transportation was experimentally evaluated. The result showed that as $N_2$ ratio increased pressure drop per mass flow and specific volume of $CO_2-N_2$ mixture also increased. In 120 and 100 bar condition the mixture was in single phase supercritical condition, and as $N_2$ ratio increased gradient of specific volume change and pressure drop per mass flow did not change largely compared to low pressure condition. In 70 bar condition the mixture phase changed from single phase liquid to single phase vapor through liquid-vapor two phase region, and it showed that the gradient of specific volume change and pressure drop per mass flow varied in each phase.