DOI QR코드

DOI QR Code

과풍속 출력 제한형 소형 풍력 발전장치 개발

Development of the Furling Control Type Small Wind Turbine System

  • 투고 : 2011.11.28
  • 심사 : 2012.03.20
  • 발행 : 2012.06.01

초록

In this study, a small wind turbine airfoil specialized for national wind condition was designed in order to develop the furling control type HAWT. And then a flow analysis was carried out based on the blade drawing which was designed to characterize of the developed airfoil. The result of the flow analysis showed that the torque on the 3 blades was 180.23N.m. This is equivalent to an output power of 5.66kw and an output efficiency of 0.44. Then we produced and constructed a 3kW - furling control type HAWT by getting the system unit design technology such as the specialized furling control device. By operating this turbine, we could get 3kW of the rated power at a wind speed of 10.5m/s through the ability test. Cut-in wind speed was 2m/s, generator efficiency was 92% at the rated power output. Sound power level was 87.2dB(A). Also we observed that the output power was limited to 10.5m/s with furling system operation.

키워드

참고문헌

  1. Cho, B. H. and Lee, J. W., "Establishment of Remote Monitoring System for Wind Turbine Test Sites Based on Hierarchical Architecture," J. of KSPE, Vol. 26, No. 9, pp. 81-87, 2009.
  2. Lee, S. B., "A Study of Designing about Small Vertical Axis Wind Turbine System with Giromill Blades," Yonsei University Press, pp. 2, 2008.
  3. Korea Institute of Energy Research, "Low Speed Wind Turbine Blade Development," 2006.
  4. Selig, M. S. and McGranahan, B. D., "Wind Tunnel Aerodynamics Tests of Six Airfoil for Use Small Wind Turbine," J. Sol. Eng., Vol. 126, No. 4, pp. 986-1002, 2004. https://doi.org/10.1115/1.1793208
  5. Lee, E. H., Kim, J.-H., Park, B. H., Han, Y. O., Choi, Y. C., Kim, C. H., and Seo, Y. T., "Experiments on the Aerodynamic Behaviors of Two-Dimensional Wing used for the Wind Turbine with the Cyclic Angle of Attack," Proc. of KSME Spring Conference, pp. 195-200, 2011.
  6. Lysen, E. H., "Introduction to Wind Energy, Consultancy Services Wind Energy Developing Countries," The Netherland, 1983.
  7. Spera D. A., "Wind Turbine Technology," ASME Press New York, 1994.
  8. Born, M. and Wolf, E., "Principles of Optics 7th Edition," Cambridge University Press, pp. 517-521, 1990.
  9. Wilson, R. E., Lissaman, P. B. S., and Walker, S. N., "Aerodynamic of Wind Power Machines," National Science Foundation, RANN, Grant No, G1-41840, Oregon University, 1974.
  10. Wilson, R. E., Lissaman, P. B. S., and Walker, S. N., "Aerodynamic Performance of Wind Turbines," Oregon State University, 1976.
  11. Griffiths, R. T. and Woollard, M. G., "Performance of the Optimal Wind Turbine," Applied Energy, Vol. 4, No. 4, pp. 261-272, 1978. https://doi.org/10.1016/0306-2619(78)90025-9
  12. Ushiyma S., Go, K. N., and Huh, J. C., "An Introduction to Wind Power Energy," Munundang, pp. 139-148, 2006.
  13. "ANSYS CFX Release Notes for 13.0," 2011.
  14. Bikdash, M., "Modeling and Control of a Bergey-Type Furling Wind Turbine," NREL Wind Energy Program Report, Deportment of Electrical Engineering, North Carolina A&T State Univ., 2002.
  15. Rogers, A. L., "Wind Turbine Noise Issues," Renewable Energy Research Laboratory Center, 2004.
  16. IEC 61400-11 2nd Edition, "Wind Turbine Generator system-part II: Acoustic nose measurement Techniques," International Electro-Technical Commission, 2002.
  17. Instruction Manual, "Sound Level Meter NL_32," Rion Co., Ltd., 2006.