DOI QR코드

DOI QR Code

전자기센서를 이용한 고속철도용 차륜재의 구름접촉피로 손상 모니터링

Damage Monitoring of Rolling Contact Fatigue in Wheel Specimen for High Speed Train Using Electro-Magnetic Sensor

  • 권석진 (한국철도기술연구원 고속철도연구본부) ;
  • 황지성 (한국철도기술연구원 고속철도연구본부) ;
  • 서정원 (한국철도기술연구원 고속철도연구본부) ;
  • 이진이 (조선대학교 IT-NDT연구센타)
  • Kwon, Seok-Jin (High-speed Railroad Systems Research Center, Korea Railroad Research Institute) ;
  • Hwang, Ji-Sung (High-speed Railroad Systems Research Center, Korea Railroad Research Institute) ;
  • Seo, Jung-Won (High-speed Railroad Systems Research Center, Korea Railroad Research Institute) ;
  • Lee, Jin-Yi (Chonsun University, IT-NDT Research Center)
  • 투고 : 2012.03.07
  • 심사 : 2009.04.27
  • 발행 : 2012.06.01

초록

Upon investigation of the damaged wheels for high speed train it was determined that the damage was caused by rolling contact fatigue during operation of train. The major problems that railway vehicle system using wheel-rail has to face during operation of railway vehicle are rolling contact fatigue, cracks in wheels, cracks in rails and wheel-rail profile wear. If these deficiencies are not controlled at early stages the huge economical problems due to unexpected maintenance cost in railway vehicle can be happened. Also, If the accurate knowledge of contact conditions between wheel and rail can be evaluated, the damage of wheel can be prevented and the maintenance operation can save money. This paper presents the applicability of electro-magnetic technique to the detection and sizing of defects in wheel. Under the condition of continuous rolling contact fatigue the damage of wheel has continuously monitored using the applied sensor. It was shown that the usefulness of the applied sensor was verified by twin disc test and the measured damaged sizes showed good agreement with the damaged sizes estimated by electro-magnetic technique.

키워드

참고문헌

  1. Orringer, O., Gray, D. E., and McCown, R. J., "Evaluation of Immediate Actions Taken to Deal with Cracking Problems in Wheels of Rail Commuter Cars," Final Report, DOT/FRA/ORD-93/15, 1993.
  2. Rovira, A., Roda, A., Marshall, M. B., Brunskill, H., and Lewis, R., "Experimental and numerical modelling of wheel-rail contact and wear," Wear, Vol. 271, No. 5-6, pp. 911-924, 2011. https://doi.org/10.1016/j.wear.2011.03.024
  3. Telliskivi, T. and Olofsson, U., "Contact mechanics analysis of measured wheel-rail profiles using the Finite Element Method," Journal of Rail and Rapid Transit, Proceedings of the IMechE Part F, Vol. 215, No. 2, pp. 65-72, 2001. https://doi.org/10.1243/0954409011531404
  4. Marshall, M. B., Lewis, R., Dwyer-Joyce, R. S., Olofsson, U., and Bjorklund, S., "Experimental characterization of wheel-rail contact patch evolution," Transactions of the ASME Journal of Tribology, Vol. 128, No. 3, pp. 493-504, 2006. https://doi.org/10.1115/1.2197523
  5. Kalker, J. J., "A fast algorithm for the simplified theory of rolling contact," Vehicle System Dynamics, Vol. 11, No. 1, pp. 1-13, 1982. https://doi.org/10.1080/00423118208968684
  6. Ringsberg, J. W., Franklin, F. J., Josefson, B. L., Kapoor, A., and Nielsen, J. C. O., "Fatigue evaluation of surface coated railway rails using shakedown theory, finite element calculations, and lab and field trials," International Journal of Fatigue, Vol. 27, No. 6, pp. 680-694, 2005. https://doi.org/10.1016/j.ijfatigue.2004.11.002
  7. Hiensch, E. J. M., Franklin, F. J., Nielsen, J. C. O., Ringsberg, J. W., Weeda, G. J., Kapoor, A., and Josefson, B. L., "Prevention of RCF damage in curved track through development of the INFRA-STAR two-material rail," Fatigue Fract. Eng. Mater. Struct., Vol. 26, No. 10, pp. 1007-1017, 2003. https://doi.org/10.1046/j.1460-2695.2003.00663.x
  8. Kapoor, A., Ringsberg, J. W., Franklin, F. J., and Josefson, B. L., "Shakedown limits in three-dimensional wheel-rail rolling-sliding contacts," Proceedings of the 8th International Fatigue Congress-Fatigue, pp. 1365-1372, 2002.
  9. Lee, J., Hwang, J.-S., Kwon, S.-J., and Seo, J.-W., "Inspection of cracks on the express train wheel using a high speed scan type magnetic camera," Trans. of KSME A, Vol. 32, No. 11, pp. 943-950, 2008. https://doi.org/10.3795/KSME-A.2008.32.11.943
  10. Hwang, J.-S., Lee, J., and Kwon, S.-J., "The application of a differential-type Hall sensors array to the nondestructive testing of express train wheels," NDT&E International, Vol. 42, pp. 34-41, 2009. https://doi.org/10.1016/j.ndteint.2008.08.001