DOI QR코드

DOI QR Code

A Study on Parameters of Soft Recoil Mechanism for Reduction of Recoil Force

주퇴력 저감을 위한 연식 주퇴 메커니즘의 매개변수에 관한 연구

  • Received : 2012.01.05
  • Accepted : 2012.04.18
  • Published : 2012.07.01

Abstract

The soft recoil mechanism was an effective mechanism for reducing the recoil force by forwarding momentum. There were some parameters such as the fire angle, firing position, and initial pressure of the recuperator, which influenced the forwarding momentum. These parameters affected the generation of the forwarding momentum in the soft recoil mechanism. To design for the mechanism, the parameters affecting momentum were studied to consider some reasonable conditions. Among the various parameters, the initial pressure of the recuperator and firing position was confirmed as a key factor to have affected the momentum. It was determined that the recoil force had a minimum value when the initial pressure of the recuperator was 180.

연식주퇴 메커니즘은 전방 운동량으로 주퇴력을 감소시키는 메커니즘이다. 연식주퇴 메커니즘에 영향을 미치는 매개변수는 사격 각도, 복좌기의 초기 압력, 발사위치등과 같이 다양하게 존재한다. 이런 매개변수들은 연식주퇴 메커니즘에서 전방 운동량을 결정짓는 요소가 된다. 연식주퇴 메커니즘의 설계를 위해 몇 가지 적당한 조건들을 고려하여 전방 운동량에 영향을 미치는 매개변수들에 대해 연구하였다. 여러 가지 매개변수들 중에서 복좌기의 초기 압력과 사격 위치가 전방 운동량에 영향을 미치는 중요한 요소로 확인하였다. 복좌기의 초기 압력이 180 일 때, 주퇴력이 가장 낮은 값을 가진다.

Keywords

References

  1. Nerdahl, M. C. and Freantz, J. W., 1973, "Mathematical Models for Engineering Analysis and Design of Howitzer, Light, Towed : 105mm Soft Recoil XM204," Artillery Weapon Systems Directorate Weapons Laboratory Technical Report, R-RRA-S-3-28-73, Rock Island, Illionois.
  2. Kathe, E. and Gast, R., "A Fire out of Battery Tank Gun : Theory and Simulation," 10th U.S. Army Gun Dynamics Symposium Proceedings, Austin, TX, pp. 37-48.
  3. Gast, R., Durocher, R., Kathe, E., Olsen, K., Gully, M. and Pigliavento, S., 2003, "Design, Testing, and Simulation of an Experimental 105mm M35 Fire Out-of-Battery(FOOB) Direct Fire Gun," US Army Armament Research, Development and Engineering Center Technical Report, ARCCB-TR-03013, Watervliet , NY.
  4. Shin, C.B., Bae, J.S., Hwang, J.H., Kang, K.J., Ahn, S.T. and Han, T.H., 2009, "Control of a Soft Recoil System for Recoil Force Reduction," Korean Society for Noise and Vibration Engineering, Vol.18, No.7, pp.764-774.
  5. Park, S. Y. , Bae, J.S., Hwang, J.H., Kang, K.J., Ahn, S.T., 2010, "A Study on the Forward Momentum of a Soft Recoil System," Journal of the Korea Institute of Military Science and Technology, Vol.13, No.6, pp.976-981.
  6. Kim , H. T., Lee, Y. S., Yang, T. H., Jun, S. B., Lee, K. S., Kang, K. J. and Ahn, S. T., 2010, "Structural and Dynamic Analysis on the Latch of Soft Recoil System Under Impact," Proceeding for Autumn Conference of the Korean Society of Mechanical Engineers, pp. 875-879.
  7. Woo, D. H., Lee, Y. S., Lee, K. S., Jun, S. B., Ahn, S. T., Kim, H. I., 2010, "Dynamic Analysis of Recoiling Part According to the Counter Recoil Velocity using the LS-DYNA," Proceeding for Autumn Conference of the Korean Society of Mechanical Engineers, pp. 1497-1500.
  8. Woo, D. H., Lee, Y. S., Lee, K. S., Jun, S. B., Ahn, S. T. and Kim, H. I., 2011, "Dynamic Analysis on the Latch of Soft Recoil System Under Counter Recoil Velocity," Proceeding for Conference of the Korea Society of CAD/CAM Engineering , pp. 1085-1088.
  9. Kim, H. T., Lee, Y. S., Woo, D. H., Jun, S. B., Lee, K. S., Kang, K. J., Ahn, S. T. and Kim, H. I., 2011, "Structure Design on the Latch of Soft Recoil System," Proceeding of Annual Conference of the Korean Institute for Military Science and Technology, pp. 2062-2065.
  10. Yang, T. H., Lee, Y. S., Lee, K. S., Jun, S. B., Cho, C. K., Hong, S. K., 2011, "A Study on the Parameter of the Soft Recoil Mechanism," Proceeding of Annual Conference of the Korean Institute for Military Science and Technology, pp. 2058-2061.
  11. Yang, T. H., Lee, Y. S., Lee, K. S., Jun, S. B. and Kang, K. J., 2011 "A Dynamic Characteristic Analysis of the Soft Recoil Mechanism using MATLAB," Proceeding of Spring Conference on Dynamics and Control Division of the Korean Society of Mechanical Engineers, pp. 175-176.
  12. Sonntag, Borgnakke, Van Wylen, "Fundamentals of Thermodynamics," 6th Edition, John Wiley & Sons
  13. Fitch, E., C. and Hong, I., T., "Hydraulic Component Design and Selection," Computerized Fluid Power Series, Vol.1
  14. Faires, J. D. and Burden, R., "Numerical Methods," Thomson & Brooks/Cole.

Cited by

  1. Case of Developing Analysis Model for Recoil System for Automatic Gun vol.24, pp.4, 2015, https://doi.org/10.9709/JKSS.2015.24.4.035