Elastomers and Composites

The Rubber Society of Korea (한국고무학회)
권호 표지
DOI QR코드

DOI QR Code

Influence of Aging Media and Filler System on Recovery Behaviors of Natural Rubber Composites

노화 매질과 충진 시스템이 천연고무 복합체의 회복 거동에 미치는 영향

  • Received : 2012.04.02
  • Accepted : 2012.04.27
  • Published : 2012.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

Difference in recovery behaviors from the circular deformation of natural rubber (NR) composites aged in air and distilled water, respectively were investigated. Recoveries of the samples aged in air were larger than those of the samples aged in distilled water. Recovery rates of the samples reinforced with filler were faster than those of the unreinforced ones. Recovery rates of the carbon black-filled samples were faster than those of the silica-filled ones. Difference in the recovery behaviors according to the aging media can be explained by the crosslinking density changes and the annealing effect.

공기와 증류수에서 노화시킨 천연고무 복합체의 원형 변형으로부터의 회복 거동의 차이를 연구하였다. 공기에서 노화시킨 시험편의 회복률이 증류수에서 노화시킨 것보다 더 컸다. 충진제로 보강한 시험편의 회복속도가 비충진 시험편보다 더 빨랐다. 카본블랙으로 보강한 시험편의 회복속도가 실리카로 보강한 시험편보다 더 빨랐다. 노화 매질에 따른 회복 거동의 차이는 가교밀도 변화와 아닐링 효과로 설명하였다.

Keywords

References

  1. B. Erman and J. E. Mark, "Rubber-like elasticity", Annu. Rev. Phys. Chem., 40, 351 (1989). https://doi.org/10.1146/annurev.pc.40.100189.002031
  2. S.-S. Choi, "Influence of thermal aging on change of crosslink density and deformation of natural rubber vulcanizates", Bull. Korean Chem. Soc., 21, 628 (2000).
  3. S.-S. Choi, "Change of crosslink density of sulfur-cured NR vulcanizates by thermal aging", Kor. Polym. J., 7, 108 (1999).
  4. S.-S. Choi, "Influence of rubber composition on change of crosslink density of rubber vulcanizates with EV cure system by thermal aging", J. Appl. Polym. Sci., 75, 1378 (2000). https://doi.org/10.1002/(SICI)1097-4628(20000314)75:11<1378::AID-APP9>3.0.CO;2-I
  5. S.-S. Choi, "Influence of internal strain on change of crosslink density in rubber Vulcanizates", Polym. Int., 50, 107 (2001). https://doi.org/10.1002/1097-0126(200101)50:1<107::AID-PI593>3.0.CO;2-Z
  6. S.-S. Choi, D.-H. Han, S.-W. Ko, and H. S. Lee, "Thermal aging behaviors of elemental sulfur-free polyisoprene vulcanizates", Bull. Korean Chem. Soc., 26, 1853 (2005). https://doi.org/10.5012/bkcs.2005.26.11.1853
  7. S.-S. Choi, S.-H. Ha, and C.-S. Woo, "Thermal aging behaviors of rubber vulcanizates cured with single and binary cure systems", Bull. Korean Chem. Soc., 27, 429 (2006). https://doi.org/10.5012/bkcs.2006.27.3.429
  8. S.-S. Choi, H.-M. Lee, J.-E. Ko, and M.-C. Kim, "Recovery behaviors of silica-reinforced SBR vulcanizates using circular deformation test", J. Ind. Eng. Chem., 13, 1169 (2007).
  9. S.-S. Choi and D.-H. Han, "Recovery prediction of thermally aged chloroprene rubber composite using deformation test", J. Appl. Polym. Sci., 110, 3560 (2008). https://doi.org/10.1002/app.28866
  10. S.-S. Choi and D.-H. Han, "Comparison of recovery behaviors of thermally aged SBR composite from compressed and circular deformations", Thermochimica Acta, 490, 8 (2009). https://doi.org/10.1016/j.tca.2009.01.030
  11. S.-S. Choi and D.-H. Han, "Strain effect on recovery behaviors from circular deformation of natural rubber vulcanizate", J. Appl. Polym. Sci., 114, 935 (2009). https://doi.org/10.1002/app.30699
  12. S.-S. Choi, J.-H. Jang, S. B. Lee, W. J. Jang, J. S. Oh, and S.-H. Lee, "Circular deformation as a means of simultaneously evaluating the compressive and tensile strain in vulcanized rubber", J. Ind. Eng. Chem., 15, 641 (2009). https://doi.org/10.1016/j.jiec.2009.09.035
  13. S.-S. Choi, "Service lifetime prediction of rubber vulcanizate using circular deformation test", Elast. Compos., 44, 116 (2009).
  14. J.-H. Jang and S.-S. Choi, "Recovery behaviors of NR, SBR and BR vulcanizates from circular deformation", Elast. Compos., 44, 442 (2009).
  15. J. S. Kim, J. H. Lee, W. S. Jung, J. W. Bae, H. C. Park, and D. P. Kang, "Effects of reinforcing fillers on far-infrared vulcanization characteristics of EPDM", Elast. Compos., 44, 47 (2009).
  16. S. M. Kim, H. W. Cho, J. W. Kim, and K. J. Kim, "Effects of processing geometry on the mechanical properties and silica dispersion of silica-filled isobutylene-isoprene (IIR) compounds", Elast. Compos., 45, 223 (2010).
  17. Y. S. Lee, K. S. Hwang, J. C. Lee, T. G. Kim, and K. R. Ha, "Effects of TESPT silane coupling agent on mechanical properties of precipitated silica filled NBR compound for oil seal", Elast. Compos., 46, 45 (2011).
  18. S.-S. Choi, J. H. Jang, and S.-H. Im, "Influence of aging medium on recovery behaviors of CR/NR composite from circular deformation", Macromol. Res., 18, 358 (2010). https://doi.org/10.1007/s13233-010-0415-2

Cited by

  1. Effects of thermal aging on degradation mechanism of flame retardant-filled ethylene-propylene-diene termonomer compounds vol.132, pp.4, 2014, https://doi.org/10.1002/app.41324
  2. Influence of microstructure in nitrile polymer on curing characteristics and mechanical properties of carbon black-filled rubber composite for seal applications vol.48, pp.8, 2016, https://doi.org/10.1177/0095244315613621