An Analysis of the Operational Time and Productivity in Whole-tree and Cut-to-Length Logging Operation System

전목 및 단목 집재작업시스템에서 작업시간 및 공정 분석

  • Kim, Min-Kyu (Department of Forest Science, Graduate School of Agricultural & Life Sciences, The University of Tokyo) ;
  • Park, Sang-Jun (Department of Forestry, College of Agriculture & Life Sciences, Kyungpook National University)
  • 김민규 (동경대학 대학원 삼림과학전공) ;
  • 박상준 (경북대학교 농업생명과학대학 임학과)
  • Published : 2012.09.30

Abstract

This study was conducted to analyze on the operational time and productivities of logging operations in whole-tree logging operation system by tower-yarder and swing-yarder, and in cut-to-length logging operation system by excavator with grapple in order to establish the efficient logging operation system and to spread logging operation technique. In the analysis of operational time, in case of whole-tree logging operation system, the felling time was 46.6 sec/cycle by chain saw, the yarding time was 480.6 sec/cycle by tower-yarder, the yarding time was 287.4 sec/cycle by swing-yarder and the bucking time was 155.14 sec/cycle by chain saw. In case of the cut-to-length logging operation system, the felling and bucking time was 225.65 sec/cycle by chain saw, the cut-to-length extraction time was 4,972 sec/cycle by excavator with grapple, the branches and leaves extraction time was 3,143 sec/cycle by excavator with grapple. The forwarding time was 4,688 sec/cycle by wheel type mini-forwarder, the forwarding time was 2,118 sec/cycle by excavator with grapple and small forwarding vehicle. In the analysis of operational productivities, in case of whole-tree logging operation system, the average felling performance was $57.89m^3/day$ by chain saw, the average yarding performance was $20.3m^3/day$ by tower-yarder, $31.55m^3/day$ by swing-yarder respectively, the average bucking performance was $20.3m^3/day$ by chain saw. In case of the cut-to-length logging operation system, the average felling and bucking performance was $11.96m^3/day$ by chain saw, the average cut-to-length extraction performance was $34.75m^3/day$ by excavator with grapple, the average branches and leaves extraction performance was $37.66m^3/day$ by excavator with grapple, the average length of operation road construction was 73.8 m/day by excavator with grapple. The average forwarding performance by wheel type mini-forwarder and the average forwarding performance by excavator with grapple and small forwarding vehicle was $15.73m^3/day$ and $65.03m^3/day$, respectively.

임목수확작업시스템 구축과 효율적인 임목수확작업 기술을 보급하기 위해 타워야더 및 스윙야더 등에 의한 전목집재작업시스템과 굴삭기 그래플 등에 의한 단목집재작업시스템의 작업시간 및 공정을 분석하였다. 전체 조사작업시간을 기준으로 분석한 1 cycle당 작업시간은 전목집재작업시스템에서 체인톱에 의한 벌목 46.6초/cycle, 타워야더에 의한 집재 480.6초/cycle, 스윙야더에 의한 집재 287.4초/cycle, 체인톱에 의한 조재 155.14초/cycle로 나타났다. 또 한 단목집재작업시스템에서는 체인톱에 의한 벌목 및 조재 225.65초/cycle, 굴삭기 그래플에 의한 단목집재 4,972초/cycle, 지엽집재 3,143초/cycle로 나타났으며, 바퀴식 미니포워더에 의한 소운재 4,688초/cycle, 굴삭기 그래플 및 소형운재차에 의한 소운재 2,118초/cycle로 나타났다. 전목집재작업시스템의 작업공정에서 체인톱에 의한 평균 벌목공정이 $57.89m^3$/일, 타워야더에 의한 평균 집재공정이 $20.3m^3$/일, 스윙야더에 의한 평균 집재공정이 $31.55m^3$/일, 체인톱에 의한 평균 조재공정이 $20.3m^3$/일로 나타났다. 또한, 단목집재작업시스템의 작업공정에서 체인톱에 의한 평균 벌목 및 조재공정이 $11.96m^3$/일, 굴삭기 그래플에 의한 평균 단목집재공정이 $34.75m^3$/일, 굴삭기 그래플에 의한 평균지엽수집공정이 $37.66m^3$/일, 굴삭기 그래플에 의한 평균 작업로의 개설공정이 73.8 m/일로 나타났으며, 바퀴식 미니포워더와 굴삭기 그래플 및 소형 운재차에 의한 평균 소운재 작업공정이 각각 $15.73m^3$/일과 $65.03m^3$/일로 나타났다.

Keywords

References

  1. 강건우. 1989. 임업에서의 순수작업시간과 임목형상조건과의 관계연구. 한국임학회지 78(4): 381-395.
  2. 강건우. 1999. 체인쏘를 사용한 소나무 간벌작업에서의 생산성연구. 산림경제연구 7(2): 12-18.
  3. 김재원, 노재후, 우태명, 이해주. 1989. 간벌작업의 작업강도 및 집재작업에 관한 연구. 산림과학논문집 39: 110-125.
  4. 노재후, 김재원. 1984. 5변수 체인쏘벌목공정표 조제에 관한 연구. 임업시험장 연구보고 31: 1-19.
  5. 노재후, 김재원, 김사일. 1988. 로그라인 집재공정 및 경제성에 관한 연구. 산림과학논문집 36: 154-165.
  6. 박상준. 2002. 트랙터부착 집재기에 의한 집재작업공정 분석. 한국임학회지 91(3): 287-295.
  7. 박상준, 함영철. 2002. 굴삭기형 타워집재기 및 원목집게톱의 작업능률과 작업비용 분석. 한국임학회지 91(4): 507-516.
  8. 박상준. 2004a. 타워야더에 의한 집재작업시스템 분석. 한국임학회지 93(3): 205-214.
  9. 박상준. 2004b. 타워야더에 의한 집재작업시스템의 최적화. 한국임학회지 93(7): 436-445.
  10. 박종명. 1997. 작업량에 따른 적정 집재기계의 선정. 한국임학회지 86(4): 450-458.
  11. 산림청. 2000a. 국산재 생산.공급체계 구축을 위한 합리적 방안 연구. 산림청. pp. 234.
  12. 산림청. 2000b.산림과 임업기술-III 산림경영-. pp. 755.
  13. 산림청. 2008. 2008년 재정사업 품셈조사연구 -숲가꾸기부문-. pp. 284.
  14. 산림청, 산림조합중앙회. 2008. 우리나라의 주요 임업기계. pp. 157.
  15. 산림청. 2009. 임업통계연보. 제39호. pp. 496.
  16. 송태영, 박문섭, 김재원, 강건우. 1998. 궤도형 집재차의 집재작업방법에 따른 작업비용 비교연구. 산림경제연구 6(2): 20-28.
  17. 송태영, 김재원, 조구현, 오재헌. 2009. 임목수확작업시스템. 국립산림과학원. pp. 99.
  18. 이근태, 박상준. 2001. 환경친화적인 임목수확모델 개발 및 공정조사에 관한 연구. 산림조합중앙회. pp. 114.
  19. 이근태, 박상준. 2002. 환경친화적인 임목수확모델 개발 및 공정조사 사업. 산림조합중앙회. pp. 89.
  20. 이근태, 박상준. 2003. 환경친화적인 임목수확모델 개발 및 공정조사 사업. 산림조합중앙회. pp. 86.
  21. 이준우, 박범진, 김재원, 송태영. 1998. 체인톱을 이용한 낙엽송 벌목작업에서의 작업강도 분석. 한국임학회지 87(2): 121-130.
  22. 지식경제부. 2008. 리기다소나무 활용을 위한 경제성분석; 목질계 바이오에너지 연료 활용을 중심으로. 지식경제부. pp. 194.
  23. 차두송, 지병윤, 최인화. 1997. 낙엽송 임분의 벌도.조재작업에 대한 시간분석. 강원대학교 연습림 연구보고 17: 3-11.
  24. 한원성, 한한섭, 김영숙, 신만용. 2008. 트랙터부착 집재기를 이용한 집재작업 분석 -춘천집재기를 중심으로-. 한국임학회지 97(6): 641-649.
  25. 한원성, 조구현, 오재헌, 송태영, 김재원, 신만용. 2009. 체인톱을 이용한 잣나무의 벌도작업 공정 분석. 한국임학회지 98(4): 451-457.