Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

Structural Analysis of Bike Handle Installed with Smart Phone Depository

스마트폰 거치대가 설치된 자전거 핸들의 구조 해석

  • Han, Moon-Sik (Keimyung University Mechanical and Automotive Engineering Dept.) ;
  • Cho, Jae-Ung (Kongju National University Mechanical Engineering Dept.)
  • Published : 2012.12.31
⟨ Previous Next ⟩

Abstract

This study investigates stress and deformation due to static and dynamic vibration analysis about various types of bike handles installed with smart phone depositories. When force is applied on the side of handle at the models of type 1, 2, 3 and 4, the maximum equivalent stress is highest at type 2. The stress or deformation becomes lowest among these 4 model types. At vibration analysis, type 1 becomes safest within the range of 500Hz and type 3 becomes stable within the range of 100Hz. The result of this study can be applied with the design of bike handle installed with smart phone depository. The damage or deformation due to vibration can be prevented when the bike falls down. This result can be widely utilized to investigate and predict the durability.

Keywords

References

  1. Bae, W. R., Shin, D. W., Shim, B. K., Kim, B. N., Shin, S. I. and Kwon, Y. K., 2010, "Development of Localization Bicycle Frame using Al 6061", 2010 Spring Conference Proceeding of KSPE, pp. 853-854.
  2. Park, B. Y., 1998, "Vibration Characteristics of a Motorcycle Body", Journal of the Korean Society of Precision Engineering, Vol. 15, No. 1, pp. 169-176.
  3. Joo, Y. S., Kim, Y. K., Kim, B. W., Moon, J. O. and Lee, K. S., 2003, "Structural analysis of a large automobile frames", Korea Society of Automotive Engineers 2003 Conference Proceedings, No. 2, pp. 1417-1422.
  4. Lee, G. B., 1986, "Stress Analysis and Technology for Vehicles by the Finite Element Method", Trans of KSME, Vol. 26, No. 2, pp. 91-155.
  5. Lee, Y. H., Kim, S. I., Suh, M. W., Son, H. S. and Kim, S. H., 1994, "Linearized Dynamic Analysis of a Four-wheel Steering Vehicle", Journal of KSAE, Vol. 2, No. 5, pp. 101-109.
  6. Kang, S. S. and Cho, S. K., "Structural design and Analysis for the Reinforced Frame of Vehicle", 2010, Journal of the KSMTE, Vol. 19, No. 4, pp. 504-510.
  7. Swanson, J., 2010, ANSYS 12.0, ANSYS Inc., U.S.A.