Al6061 소재의 소구경 고속측면밀링특성에 관한 연구

A Study on the Characteristics of High-Speed Small-Diameter Wipe Milling for Al6061

  • 박휘근 (금오공과대학교 기계공학부 기계설계대학원) ;
  • 이상민 (금오공과대학교 기계공학부 기계설계대학원) ;
  • 이충석 (금오공과대학교 기계공학부 기계설계대학원) ;
  • 채승수 (금오공과대학교 기계공학부 기계설계대학원) ;
  • 이원석 (금오공과대학교 기계공학부 기계설계대학원) ;
  • 최윤서 (금오공과대학교 기계공학부 기계설계대학원) ;
  • 조현택 ((주)SKEM) ;
  • 백영종 ((주)SKEM) ;
  • 이종찬 (금오공과대학교 기계공학부)
  • 발행 : 2012.06.30

초록

In this paper, the high speed milling characteristics of Al6061 was studied. A gantry type milling & tapping center was developed for this study. The cutting force and the resulting surface roughness were measured at various cutting conditions. The experimental results indicate that the surface roughness is relative to the cutting conditions.

키워드

참고문헌

  1. Tae Jo Ko, et. al., "Modern Machine Tools", Munundang, pp. 12-32, 2004.
  2. Jong-Chan Lee, et. al., "Modern Manufacturing Processes", Munundang, 2001.
  3. Jong-Chan Lee, et. al., "Grinding & Machining with Superabrasives", Munundang, 2004.
  4. Tae Jo Ko, et. al., "Fundamentals of Machining and Machine Tools", Dongmyeong, pp. 77-103, 2002.
  5. Sang-Bok Lee, Won-Il Kim, Duck-Hyun Wang, Sil-Kyung Kim, "An Evaluation on Cutting Characteristics in Milling Process with Different Helix Angle Endmills", Proceedings of the Ksmte Spring Conference, pp. 196-201, 2003.
  6. Kyoung-Deuk Jung, Tae-Jo Ko, Hee-Sool Kim, "Design of A Small Thin Milling Cutter Considering Built-up Edge", Journal of the Korean Society of Precision Engineering, Vol. 18, No. 5, pp. 130-136, 2001.