한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제11권3호
  • /
  • Pages.146-153
  • /
  • 2012
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지

RP시스템을 이용한 원형시제품 제작 시 제품 오차 보정에 관한 연구

A Study on Correction of CIRCLE Product Error by Prototype using Rapid Prototyping System

  • 김원중 (한국폴리텍VII대학 창원캠퍼스 컴퓨터응용기계설계과)
  • 발행 : 2012.06.30
⟨ 이전 논문 다음 논문 ⟩

초록

RP system which is widely used to reduce the time of product development is to resolve the problem of cutting work. It is a method using laminated thin films to produce many forms. The RP equipment used for this experiment is FDM system. This can produce 3D model with using 3D CAD designed file within a relatively short time. Not only this, this system also through 3D file preparation, 3D product manufacture, removal support these 3 step operating process can easily produce goods, but product can be different from original design. This research has been conducted to minimize this error. To apply to the circular product made a circular specimen and measured several times with 3D scanner and find out average 99.622% of accuracy. This result is applied to RP system, and with this changed design produced a specimen, and found out the accuracy is increased to 99.958%. If this is applied to circular products, we can produce more precise products with less process.

키워드

참고문헌

  1. Ha, M.K., Jun, J.U., "Influence of Injection Amount Variation on Surface Roughness at FDM", J. of KSPSE, Vol. 6, No. 2, pp. 54-59, 2002.
  2. Man-Kyung Ha, Jae-Uhk Jun, "The Influence of Surface Roughness on Slice Interval Adjustment at FDM", J. of KSMTE, Vol. 11, No. 4, pp. 68-74, 2002.
  3. Woo-Byok Jeong, Sun-Young Lee, Sung-Hoon Ahn, "Development of Translucent RP Material by Post-Processing: Case Study of FDM", J. of KSME, Vol. 27, No. 9, pp. 1524-1530, 2003.
  4. Sung-Hoon Ahn, Sun-Young Lee, Chang-Il Beak, Won-Sik Chu, "Strength Prediction Model of Rapid Prototyping Parts - Fused Deposition Modeling(FDM)", J. of KSCM, Vol. 5, No. 6, pp. 38-43, 2002.
  5. Jin-Seo Jung, Jae-Uhk Jun, Gu-Sang Han, Sang-Ha Seo, Man-Kyung Ha, "An Estimation on Area Error for Surface Roughness of Rapid Prototype by FDM", J. of KSMPE, Vol. 2, No. 1, pp. 45-50, 2003.
  6. Eon-Chan Jeon, Soo-Yong Kim, Min-Sik Han, Tae-Ho Kim, "The Study on Application of Reverse Engineering on Correction of a Product Error by Rapid Prototyping", J. of KSMPE, Vol. 6, No. 4, pp. 8-14, 2007.
  7. Se-Young Cheon, Won-Jung Kim, "The Study on Correction of Product Error by Prototype Using Rapid Prototyping System", J. of KOSTET, Vol. 16, No. 1, pp. 109-117, 2011.