ELID 경면 연삭 가공된 티타늄 표면의 세포 활성도

Cell Activity of ELID-Machined Titanium Surface

  • 강종호 (한국세라믹기술원 그린세라믹본부) ;
  • 이명현 (한국세라믹기술원 그린세라믹본부) ;
  • 서원선 (한국세라믹기술원 그린세라믹본부) ;
  • 이석원 (경희대학교 치과대학) ;
  • 곽태수 (경남과학기술대학교 기계공학과) ;
  • 최헌진 (연세대학교 신소재공학과)
  • 발행 : 2012.06.30

초록

We investigated the cell activity of controlled titanium surface using various grinding methods including ELID (Electrolytic In-Process Dressing) grinding method. The influence of titanium surface condition by each grinding process on the cell activity was evaluated by ALP activity of MSC(Mesenchymal Stem Cells). The ALP activity of controlled surface by ELID grinding process using # 2000 wheel was higher than that of other titanium surface. The morphological, chemical properties of machined surface by grinding method was observed using various analytical method.

키워드

참고문헌

  1. Myung-Joo Kim, Myung-Un Choi, Chang-Whe Kim, "Activation of phospholipase D1 by surface roughness of titanium in MG63 osteoblast-like cells", Biomaterials, Vol. 27, pp. 5502-5511, 2006.
  2. J.E. Gough, I. Notingher, L.L. Hench, "Osteoblast attachment and mineralized nodule formation on rough and smooth 45S5 bioactive glass monoliths", J. Biomed, Mater. Res. A., Vol. 68, pp. 640, 2004.
  3. O. Zinger, K. Anselme, A. Denzer, P. Habersetzer, M. Wieland, J. Jeanfils, P. Hardouin, D. Landolt, "Time-dependent morphology and adhesion of osteoblastic cells on titanium model surfaces featuring scale-resolved topography", Biomaterials, Vol. 25, pp. 2695-2711, 2004.
  4. L. Ponsonnet, K. Reybier, N. Jaffrezic, V. Comte, C. Lagneau, M. Lissac, C. Martelet, "Relationship between surface properties (roughness, wettability) of titanium and titanium alloys and cell behaviour", Materials Science and Engineering: C, Vol. 23, pp. 551-560, 2003.
  5. Kunzler, T. P., Drobek, T., Schuler, M., Spencer, N. D., "Systematic study of osteoblast and fibroblast response to roughness by means of surface-morphology gradients", Biomaterials Vol. 28, pp. 2175-2182, 2007.
  6. Sung-Hun Kim, "A study on the grinding characteristics of titanium alloy and the ELID characteristics of small diameter grinding wheel", pp. 36-49, Master thesis, Kum-Oh National University of Technology, 2001.
  7. Ulrike Diebold, "The surface science of titanium dioxide", surface science resports Vol. 48, pp. 53-229, 2003.
  8. Kofstad, P., Hauffe, K., Kjollesdal H., "Investigation on the Oxidation. Mechanism of Titanium", Acta Chemica Scandinavica, Vol. 12, pp. 239-266, 1958.
  9. Russell RW, Kon KF, "Oxidation behavior of surface-modified titanium for titanium-ceramic restorations", J Prosthet Dent Vol. 77, pp. 423-434, 1997.
  10. Jukka Lammaa, Bengt Kasemo, Stig Hansson, "Acceleratedo xideg rowth on titanium implants during autoclaving caused by fluorine contamination", Biomaterials Vol. 6, pp. 23-27, 1985.
  11. Yeong-Joon Park, Ho-Jun Song, In Kim.Hong-So Yang, "Surface characteristics and bioactivity of oxide film on titanium metal formed by thermal oxidation", J. Mater. Sci.: Mater Med Vol. 18, pp. 565-575, 2007.
  12. Minkmas Vatanatham and Shoichi Kimura, "Hydroxyapatite Coating on Thermally Oxidized Titanium Substrates", J. Am. Ceram. Soc., Vol. 84 pp. 2135-37, 2001.