Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

Review of Recent Progress in Micromilling Process Research

미세밀링공정의 최근 연구동향

  • 허세곤 (연세대학교 기계공학과) ;
  • 이원균 (연세대학교 기계공학과) ;
  • 민병권 (연세대학교 기계공학과) ;
  • 제태진 (한국기계연구원 나노공정연구실)
  • Published : 2012.04.30
⟨ Previous Next ⟩

Abstract

Recently, micromilling process has been progressed to meet the variety of the industry demands in micromolds and precision components. As a result, more and more commercialized micro tools and machines become available during last few years. This paper reviews the recent progress of micromilling technology in last five years. The results in process, machine tools, and micro tool fabrications are discussed.

Keywords

References

  1. Liu, X., Devor, R. E., Kapoor, S. G. and Ehmann, K. F., "The Mechanics of Machining at the Microscale: Assessment of the Current State of the Science", Journal of Manufacturing Science and Engineering, Vol. 126, pp. 666-678, 2004.
  2. Dornfeld, D., Min, S. and Takeuchi, Y., "Recent Advances in Mechanical Micromachining", Annals of the CIRP, Vol. 55, pp. 745-768, 2006.
  3. Novakov, T. and Jacson, M. J., "Chatter problems in micro- and macrocutting operations, existing models, and influential parameters-a review", The International Journal of Advanced Manufacturing Technology, Vol. 47, pp. 597-620, 2010.
  4. Bissacco, G., Hansen, H. N. and Slunsky, J., "Modelling the cutting edge radius size effect for force prediction in micro milling", CIRP Annals - Manufacturing Technology, Vol. 57, pp. 113-116, 2008.
  5. Mian, A. J, Driver, N. and Mativenga, P.T., "Identification of factors that dominate size effect in micro-machining", International Journal of Machine Tools & Manufacture, Vol. 51, pp. 383-394, 2011.
  6. Lai, X., Li, H., Li, C., Lin, Z. and Ni, J., "Modelling and analysis of micro scale milling considering size effect, micro cutter edge radius and minimum chip thickness", International Journal of Machine Tools & Manufacture, Vol. 48, pp. 1-14, 2008.
  7. Yun, H. T., Heo, S., Lee, M. K., Min, B.-K. and Lee, S. J., "Ploughing detection in micromilling Processes using the cutting force signal", International Journal of Machine Tools & Manufacture, Vol. 51, pp. 377-382, 2011.
  8. Jin, X. and Altintas, Y., "Slip-line field model of micro-cutting process with round tool edge effect", Journal of Materials Processing Technology, Vol. 211, pp. 339-355, 2011.
  9. Altintas, Y. and Jin, X., "Mechanics of micro-milling with round edge tools", CIRP Annals - Manufacturing Technology, Vol. 60, pp. 77-80, 2011.
  10. Lee, H. U., Cho, D.-W. and Ehmann, K. F., "A mechanistic model of cutting forces in micro- end-milling with cutting-condition-independent cutting force coefficients", Journal of Manufacturing Science and Engineering, Vol. 130, pp. 031102, 2008.
  11. Park, S. S. and Malekian, M., "Mechanistic modeling and accurate measurement of micro end milling forces", CIRP Annals - Manufacturing Technology, Vol. 58, pp. 49-52, 2009.
  12. Malekian, M., Park, S. S. and Jun, M. B. G., "Modeling of dynamic micro-milling cutting forces", International Journal of Machine Tools & Manufacture, Vol. 49, pp. 586-598, 2009.
  13. Salahshoor, M. and Ahmadian, H., "Continuous model for analytical prediction of chatter of milling", International Journal of Machine Tools & Manufacture, Vol. 49, pp. 1136-1143, 2009.
  14. Mascardelli, B. A., Park, S. S. and Freiheit, T., "Substructure coupling of microend mills to aid in the suppression of chatter", Journal of Manufacturing Science and Engineering, Vol. 130, pp. 011010, 2008.
  15. Pfefferkorna, F. E., Lei, S., Jeon, Y. and Haddad, G., "A metric for defining the energy efficiency of thermally assisted machining", International Journal of Machine Tools & Manufacture, Vol. 49, pp. 357-365, 2009.
  16. Shelton, J. A. and Shin, Y. C., "Experimental Evaluation of Laser-Assisted Micromilling in a Slotting Configuration", Journal of Manufacturing Science and Engineering, Vol. 132, pp. 021008, 2010.
  17. Jeon, Y. and Pfefferkorn, F., "Effect of Laser Preheating the Workpiece on Micro end Milling of Metals", Journal of Manufacturing Science and Engineering, Vol. 130, pp. 011004, 2008.
  18. Melkote, S., Kumar, M., Hashimoto, F. and Lahoti, G., materials", CIRP Annals - Manufacturing Technology, Vol. 58 pp. 45-48, 2009.
  19. Ding, H., Ibrahim, R., Cheng, K. and Chen, S. -J., "Experimental study on machinability improvement of hardened tool steel using two dimensional vibration-assisted micro-end-milling", International Journal of Machine Tools & Manufacture, Vol. 50, pp. 1115-1118, 2010.
  20. Marcon, A., Melkote, S., Kalaitzidou, K. and DeBra, D., "An experimental evaluation of graphite nanoplatelet based lubricant in micro-milling", CIRP Annals - Manufacturing Technology, Vol. 59, pp. 141-144, 2010.
  21. Jun, M. B. G., Joshi, S. S., Devor, R. E. and Kapoor, S. G., "An experimental evaluation of an atomization-based cutting fluid application system for micromachining", Journal of Manufacturing Science and Engineering, Vol. 130, pp. 031118, 2008.
  22. Brecher, C., Utsch, P., Klar, R. and Wenzel, C., "Compact design for high precision machine tools", International Journal of Machine Tools & Manufacture, Vol. 50, pp. 328-334, 2010.
  23. Huo, D., Cheng, K. and Wardle, F., "A holistic integrated dynamic design and modelling approach applied to the development of ultraprecision micro-milling machines", International Journal of Machine Tools & Manufacture, Vol. 50, pp. 335-343, 2010.
  24. Zaeh, M. and Siedl, D., "A new method for simulation of machining performance by integrating finite element and multi-body simulation for machine tools", CIRP Annals - Manufacturing Technology, Vol. 56, pp. 383-386, 2007.
  25. Aramcharoen, A., Mativenga, P. T., Yang, S., Cooke, K. E. and Teer, D. G., "Evaluation and selection of hard coatings for micro milling of hardened tool steel", International Journal of Machine Tools & Manufacture, Vol. 48, pp. 1578-1584, 2008.
  26. Torres, C. D., Heaney, P. J., Sumant, A. V., Hamilton, M. A., Carpick, R. W. and Pfefferkorn, F. E., "Analyzing the performance of diamond-coated micro end mills", International Journal of Machine Tools & Manufacture, Vol. 49, pp. 599-612, 2009.
  27. Ozel, T., Thepsonthi, T., Ulutan, D. and Kaftanoglu, B., "Experiments and finite element simulations on micro-milling of Ti-6Al-4V alloy with uncoated and cBN coated micro-tools", CIRP Annals - Manufacturing Technology, Vol. 60, pp. 85-88, 2011
  28. Filiz, S., Xie, L., Weiss, L. E. and Ozdoganlar, O. B., "Micromilling of microbarbs for medical implants", International Journal of Machine Tools & Manufacture, Vol. 48, pp. 459-472, 2008.
  29. Nakamoto, K., Ishida, T., Kitamura, N. and Takeuchi, Y., "Fabrication of microinducer by 5-axis control ultraprecision micromilling", CIRP Annals - Manufacturing Technology, Vol. 60, pp. 407-410, 2011.