한국전기전자재료학회논문지 (Journal of the Korean Institute of Electrical and Electronic Material Engineers)

  • 제25권6호
  • /
  • Pages.426-430
  • /
  • 2012
  • /
  • 1226-7945(pISSN)
  • /
  • 2288-3258(eISSN)
한국전기전자재료학회 (The Korean Institute of Electrical and Electronic Material Engineers)
권호 표지
DOI QR코드

DOI QR Code

유기 용매 혼합비에 따른 고체산화물 연료전지 전해질 지지체용 세라믹 그린 시트성형 및 소결 특성

Ceramic Green Sheet and Sintering Properties on Solvent Mixture Rate of Electrolyte for Solid Oxide Fuel Cells Fabrication

  • 투고 : 2012.04.06
  • 심사 : 2012.05.10
  • 발행 : 2012.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The properties of green sheet were investigated in order to understanding an effects of organic solvent mixture ratio for solid oxide fuel cells fabrication. The purpose of this work is to optimize the slurry condition using the design of experiment to improve green sheet properties. The elongation increased with increasing amount of binder and solvent. With increasing amount of solvent, the air permeability increased but the tensile strength decreased. The best properties of the green sheet appeared amount of the binder 17 wt%, solvent 35 wt% and powder 48 wt%. The optimum condition of green and sintered density for solid oxide fuel cells fabrication was obtained in the sample pressured at 800 $kgf/cm^2$.

키워드

참고문헌

  1. H. Moon, S. D. Kim, S. H. Hyun, and H. S. Kim, Int. J. Hydrog. Energy, 33, 1758 (2008). https://doi.org/10.1016/j.ijhydene.2007.12.062
  2. Z. Wang, J. Qian, S. Wang, and T. Wen, J. Alloys Comp., 437, 264 (2007). https://doi.org/10.1016/j.jallcom.2006.07.110
  3. T. Suzuki, Y. Funahashi, T. Yamaguchi, Y. Fujishiro, and M. Awano, J. Power Sources, 175, 68 (2008). https://doi.org/10.1016/j.jpowsour.2007.09.082
  4. Z. Yang, G. G. Xia, and J. W. Stevenson, J. Power Sources, 160, 1104 (2006). https://doi.org/10.1016/j.jpowsour.2006.02.099
  5. N. Sakai, T. Horita, Y. P. Xiong, K. Yamaji, H. Kishimoto, M. E. Brito, H. Yokokawa, and T. Maruyama, Solid State Ionics, 176, 681 (2005). https://doi.org/10.1016/j.ssi.2004.11.012
  6. H. G. Kim, M. S. Koo, J. K. Park. H. Y. Jung, J. S. Kim, H. W. Lee, and J. H. Lee, Journal of the Korean Ceramic Society, 43, 85 (2006). https://doi.org/10.4191/KCERS.2006.43.2.085
  7. H. Moon, S. D. Kim, E. W. Park, S. H. Hyun, and H. S. Kim, Int. J. Hydrog. Energy, 33, 2826 (2008). https://doi.org/10.1016/j.ijhydene.2008.03.024
  8. J. H. You, D. H. Yeo, J. S. Lee, H. S. Shin, H. G. Yoon, and J. H. Kim, J. KIEEME, 19, 1112 (2006).
  9. H. J. Kwon, H. S. Shin, D. H. Yeo, J. H. Kim, and Y. S. Cho, J. KIEEME, 21, 341 (2008).
  10. J. Y. Kim, S. T. Kim, J. C. Park, and M. J. Yoo, J. KIEEME, 21, 236 (2008).
  11. W. S. Lee, C. H. Kim, M. S. Ha, S. J. Jeong, J. S. Song, and B. K. Ryu, Journal of the Korean Ceramic Society, 42, 132 (2005). https://doi.org/10.4191/KCERS.2005.42.2.132