Journal of international Conference on Electrical Machines and Systems

  • 제1권3호
  • /
  • Pages.274-281
  • /
  • 2012
  • /
  • 2234-6902(pISSN)
  • /
  • 2234-7577(eISSN)
대한전기학회 분과 (Journal of International Conference on Electrical Machines and Systems)
권호 표지
DOI QR코드

DOI QR Code

Electrical Machines for High Speed Applications with a Wide Constant-Power Region Requirement

  • Gerada, David (Research and Technology Department Cummins Generator Technologies) ;
  • Borg-Bartolo, David (Machine Performance Department, Turbo Power Systems Ltd.) ;
  • Mebarki, Abdeslam (Research and Technology Department Cummins Generator Technologies) ;
  • Micallef, Christopher (Research and Technology Department Cummins Generator Technologies) ;
  • Brown, Neil L. (Research and Technology Department Cummins Generator Technologies) ;
  • Gerada, Chris (Faculty of Engineering University of Nottingham)
  • 투고 : 2012.01.06
  • 심사 : 2012.07.12
  • 발행 : 2012.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper discusses the issues associated with the design of high speed machines for applications with a wide constant-power region requirement. Using described multi-domain design environments which put equal weight on the electromagnetic, thermal and mechanical considerations, the suitability and power density achievable using Induction Machines (IM) and Permanent Magnet Synchronous Machines (PMSM) are compared.

키워드

참고문헌

  1. C. Nelson, "Exhaust Energy Recovery" http://www1.eere.energy.gov/vehiclesandfuels/pdfs/merit_review_2009/advanced_combustion/ace_41_nelson.pdf
  2. D. Gerada, A. Mebarki, N.L. Brown, K.J. Bradley, and C.Gerada, "Design Aspects of High Speed, High Power Density, Laminated Rotor Induction Machines" in IEEE Trans. on Ind. Electronics, Vol. 58, No. 9, pp. 4039-4047, Sept. 2011. https://doi.org/10.1109/TIE.2010.2098364
  3. A. Binder, T. Schneider and M. Klohr, "Fixation of Buried and Surface-Mounted Magnets in High-Speed Permanent Magnet Synchronous Machines," IEEE Trans. on Ind. Applics, Vol. 42, No. 4, pp. 1031-1037, July/August 2006. https://doi.org/10.1109/TIA.2006.876072
  4. J.P. Holman , Heat Transfer, 10th edit., New York, McGraw Hill, 2009.
  5. [5] K.M. Becker, and J. Kaye, "Measurements of Diabatic Flow in an Annulus with an Inner Rotating Cylinder", ASME Transactions- Journal of Heat Transfer, Vol. 84 pp.97-105, 1964.
  6. K.M. Becker, and J. Kaye, "The Influence of a Radial Temperature Gradient on the Instability of Fluid Flow in an Annulus with an Inner Rotating cylinder ", ASME Transactions- Journal of Heat Transfer, Vol. 84 pp.106-110, 1964.
  7. J. Saari, "Friction Losses and Heat Transfer in High-Speed Electrical Machines", Report 50, Helsinki University of Technology, Espoo, Finland, 1996.
  8. N. Hay, D. Lampard, S.J. Pickering, and T.F. Roylance, "Convection heat transfer correlations relevant to cooling situations in electric motors", Paper no WNHT18, ASME Winter Annual Meeting, New Orleans, 1993.
  9. [9] O. Oslejsek, "The cooling of the end windings of small enclosed electric machines", Elektrotech Obzor, Vol. 61, No. 10. pp. 548-556, 1973.
  10. R. Lateb, J. Enon, and L. Durantay, "High speed, High power electrical induction motor technologies for integrated compressors" in Proc. International Conference on Electrical Machines and Systems, ICEMS '09, November 2009, pp.1- 6.
  11. M. Ikeda, S. Sakabe, and K. Higashi, "Experimental Study of High Speed Induction Motor Varying Rotor Core Construction", IEEE Trans. Energy Conversion, vol.5, no.1, pp.629-637, March 1990.
  12. W.L. Soong, G.B. Kliman, R.N. Johnson, R.A. White, and J.E. Miller, " Novel High-Speed Induction Motor for a Commercial Centrifugal Compressor", IEEE Trans. Industry Applications, vol.36, no.3, pp.706-713, May 2000. https://doi.org/10.1109/28.845043
  13. T. Wang, F. Wang, H. Bai and J. Xing, "Optimization Design of Rotor Structure for High Speed Permanent Magnet Machines", in Proc. International Conference on Elec. Machines and Systems, ICEMS‟07, Oct 2007, pp.1438-1442.
  14. Z. Q. Zhu, K. Ng, N.Schofield and D. Howe, "Improved Analytical Modelling of Rotor Eddy Current Loss in Brushless Machines Equipped with Surface-Mounted Permanent Magnets," IEEE Proc. Elect. Power Applics, Vol. 151, No. 6, pp. 641-650, Nov. 2004. https://doi.org/10.1049/ip-epa:20040546
  15. A. M. El-Refaie, and T.M. Jahns "Optimal Flux Weakening in Surface PM Machines Using Fractional-Slot Concentrated Windings," IEEE Trans. on Ind. Applics, Vol. 41, No. 3, pp. 790-800, May/June 2005. https://doi.org/10.1109/TIA.2005.847312
  16. T. Noguchi, Y. Takata, Y. Yamashita, Y. Komatsu and S. Ibaraki,"220000 r/min, 2kW PM Motor Drive for Turbocharger," IEEJ Trans. on Ind. Applications, Vol. 125, No. 9, pp. 854-861, Sept. 2005. https://doi.org/10.1541/ieejias.125.854
  17. I. Takahashi, T. Koganezawa, G. Su, and K. Ohyama, "A Super High Speed Motor Drive System by a Quasi-Current Source Inverter," IEEE Trans. on Ind. Applics, Vol. 30, No. 3, pp. 683-690, May/June 1994. https://doi.org/10.1109/28.293717
  18. D. Gerada, A. Mebarki and C. Gerada, "Optimal Design of a High Speed Concentrated Wound PMSM", in Proc. International Conference on Elec. Machines and Systems, ICEMS‟09, Nov 2009, pp.1-6.

피인용 문헌

  1. Design criteria for water cooled systems of induction machines vol.114, pp.None, 2017, https://doi.org/10.1016/j.applthermaleng.2016.12.031