References
- J. R. Davis: Aluminum and Aluminum Alloys, ASM international, OH, USA, (1993) 3
- M. C. Flemings: Metall. Sci. Technol., 18 (2000) 3
- Z. Fan: Int. Mater. Rev., 41 (2002) 49
- C. P. Hong, K. D. Kim: Solid State Phenom. 116-117 (2006) 44 https://doi.org/10.4028/www.scientific.net/SSP.116-117.44
- Y. Birol: J. Alloys Comp., 470 (2009) 183 https://doi.org/10.1016/j.jallcom.2008.02.093
- J. G. Sim, J. Y. Moon, J. M. Kim, C. P. Hong: Solid State Phenom. 116-117 (2006) 509 https://doi.org/10.4028/www.scientific.net/SSP.116-117.509
- J. M. Kim, J. G. Sim, J. Y. Moon, M. S. Kim, J. M. Kim, K. H. Min C. P. Hong: Proc. of the 9th Int. Conf. on Semisolid Processing of Alloys and Composites, Trans Tech Publication Ltd., Korea, (2006) 128
- J. G. Sim, B. H. Choi, Y. S. Jang, J. M. Kim, C. P. Hong : ISIJ Int. 50 (2010) 1165-1174 https://doi.org/10.2355/isijinternational.50.1165
- D. Liu, H.V.Atkinson, H.Jones : Acta Materialia 53 (2005) 3807-3819 https://doi.org/10.1016/j.actamat.2005.04.028
- A. Maciel Camacho, H. V. Atkinson, P. Kapranos, B. B. Argent : Acta Materialia 51 (2003) 2319-2330 https://doi.org/10.1016/S1359-6454(03)00040-5
- J. G. Sim, Y. S. Jang, J. Y. Moon, J. M. Kim, K. H. Min, C. P. Hong : ISIJ Int. 49 (2009) 1700-1709 https://doi.org/10.2355/isijinternational.49.1700
- Alexander A.Kazakov : Advanced Materials & Processes, 157 (2000) 3
- J. B. Patel, Y. Q. Liu, G. Shao, Z. Fan : Materials Science and Engineering A 476 (2008) 341-349 https://doi.org/10.1016/j.msea.2007.05.046
- Bengt Hallstedt, Evgueni Balitchev, Hideki Shimahara, Dieter Neuschutz : ISIJ Int. 46 (2006) 1852-1857 https://doi.org/10.2355/isijinternational.46.1852
- Shan lin, "A study of hot tearing in wrought aluminum alloys", PhD thesis. University of Quebec in Chicoutimi, the Canada, (1999)
- G. A. Edward, K. Stiller, G. L. Dunlop, M. J. Couper : Acta mater. 46 (1998) 3893-3904 https://doi.org/10.1016/S1359-6454(98)00059-7
- J. R. David : Corrision of aluminum and aluminum alloys, ASM international, OH, USA, (1999) 4
Cited by
- Macro-Segregation and Microstructural Characteristics in Rheo-Diecasting of a High Strength Al–4.8 mass%Si–0.7 mass%Mg Alloy vol.55, pp.6, 2014, https://doi.org/10.2320/matertrans.M2014041
- Macro-Segregation Characteristics in Semi-Solid Forging of a High Strength Al-4.8Si-0.7Mg Alloy vol.55, pp.11, 2014, https://doi.org/10.2320/matertrans.M2014201
- Application of Rheo-diecasting of a High Strength Al^|^ndash;Si^|^ndash;Mg Alloy to Automotive Suspension Arms vol.53, pp.3, 2012, https://doi.org/10.2355/isijinternational.53.502
- Effects of Si Content and Forging Pressure on the Microstructural and Mechanical Characteristics in Semi-solid Forging of Al-Si-Mg Alloys vol.50, pp.7, 2012, https://doi.org/10.1007/s11661-019-05229-6