참고문헌
- Y. Kobayashi, "Current Status and Needs in the Future of Ceramics Used for Semiconductor Production Equipment," p. 17, Osaka, Japan, July, 2005, The 37th Seminar on High Temperature Ceramics, 2005.
- N. Ito, T. Moriya, F. Uesugi, M. Matsumoto, S. Liu, and Y. Kitayama, "Reduction of Particle Contamination in Plasma-Etching Equipment by Dehydration of Chamber Wall,'' Jpn. J. Appl. Phys., Part I, 47 [5] 3630-4 (2008). https://doi.org/10.1143/JJAP.47.3630
- M. Schaepkens, R. C. M. Bosch, T. E. F. M. Standaert, G. S. Oehrlein, and J. M. Cook, ''Influence of Reactor Wall Conditions on Etch Processes in Inductively Coupled Fluorocarbon Plasmas,'' J. Vac. Sci. Technol. A., 16 [4] 2099-107 (1998)
- D. M. Kim, S. H. Lee, W. B. Alexander, K. B. Kim, Y. S. Oh, and S. M. Lee, "X-Ray Photoelectron Spectroscopy Study on the Interaction of Yttrium-Aluminum Oxide with Fluorine-Based Plasma," J. Am. Ceram. Soc., 94 [10] 3455-9 (2011). https://doi.org/10.1111/j.1551-2916.2011.04589.x
- D. M. Kim, S. Y. Yoon, K. B. Kim, H. S. Kim, Y. S. Oh, and S. M. Lee, "Plasma Resistance of Yttria Deposited by EBPVD Method (in Korean)," J. Kor. Ceram. Soc., 45 [11] 707-12 (2008). https://doi.org/10.4191/KCERS.2008.45.1.707
- K. B. Kim, D. M. Kim, J. K. Lee, Y. S. Oh, H. T. Kim, H. S. Kim, and S. M. Lee, ''Erosion Behavior of YAG Ceramics under Fluorine Plasma and their XPS Analysis (in Korean),'' J. Kor. Ceram. Soc., 46 [5] 456-61 (2009). https://doi.org/10.4191/KCERS.2009.46.5.456
-
D. M. Kim, Y. S. Oh, S. W. Kim, H. T. Kim, D. S. Limand, and S. M. Lee, "The Erosion Behaviors of
$Y_2O_3\;and\;YF_3$ Coatings under Fluorocarbon Plasma," Thin Solid Films, 519 [20] 6698-702 (2011). https://doi.org/10.1016/j.tsf.2011.04.049 -
D. M. Kim, K. B. Kim, S. Y. Yoon, Y. S. Oh, H. T. Kim, and S. M. Lee, "Effects of Artificial Pores and Purity on the Erosion Behaviors of Polycrystalline
$Al_2O_3$ Ceramics under Fluorine Plasma," J. Ceram. Soc. Jpn., 117 [8] 863-7 (2009). https://doi.org/10.2109/jcersj2.117.863 - J. Iwasawa, R. Nishimizu, M. Tokita, M. Kiyohara, and K. Uematsu, "Plasma Resistant Dense Yttrium Oxide Film Prepared by Aerosol Deposition Process," J. Am. Ceram. Soc., 90 [8] 2327-32 (2007). https://doi.org/10.1111/j.1551-2916.2007.01738.x
- B. K. Lee, D. S Park, W. H. Yoon, J. h. Ryu, B. D. Hahn, and J. J. Choi, "Microstructure and Properties of Yttria Film Prepared by Aerosol Deposition (in Korean)," J. Kor. Ceram. Soc., 46 [5] 441-7 (2009). https://doi.org/10.4191/KCERS.2009.46.5.441
-
W. J. Kim, M. Taya, K. Yamada, and N. Kamiya, "Percolation Study on Electrical Resistivity of
$SiC/Si_3N_4$ Composites with Segregated Distribution," J. Appl. Phys., 83 [5] 2593-8 (1988). - R. P. Kusy "Influence of Particle Size Ratio on the Continuity of Aggregates," J. Appl. Phys., 48 [12] 5301-5 (1977). https://doi.org/10.1063/1.323560
- Da He and N. N. Ekere "Effect of Particle Size Ratio on the Conducting Percolation Threshold of Granular Conductive- Insulating Composites," J. Appl. Phys., 37 [13] 1848-52 (2004).
- A. Malliaris and D. Turner, "Influence of Particle Size on the Electrical Resistivity of Compacted Mixtures of Polymeric and Metallic Powders," J. Appl. Phys., 42 [2] 614-18 (1971). https://doi.org/10.1063/1.1660071
-
L. C. Stearns, J. h. Zhao, and M. P. Harmer "Processing and Microstructure Development in
$Al_2O_3$ -SiC 'Nanocomposites," J. Eur. Ceram. Soc., 10 [6] 473-7 (1992). https://doi.org/10.1016/0955-2219(92)90022-6 - S. J. Kang, Sintering : Densification, Grain Growth, and Microstructure, pp. 95-6, Elsevier Butterworth-Heinemann, London, 2005.
- W. W. Mullins, "The Statistical Self-Similarity Hypothesis in Grain Growth and Particle Coarsening," J. Appl. Phys., 59 [4] 1341-49 (1986). https://doi.org/10.1063/1.336528