한국의류학회지 (Journal of the Korean Society of Clothing and Textiles)

  • 제36권4호
  • /
  • Pages.382-390
  • /
  • 2012
  • /
  • 1225-1151(pISSN)
  • /
  • 2234-0793(eISSN)
한국의류학회 (The Korean Society of Clothing and Textiles)
권호 표지
DOI QR코드

DOI QR Code

지능형 소방복의 양산화를 위한 이방향 형상기억합금 부착 방법

Attachment of Two-Way Shape Memory Alloy onto Fabric for Mass Production of Fire Fighters' Turnout Gear

  • 박미경 (연세대학교 의류환경학과) ;
  • 이지연 (연세대학교 의류환경학과) ;
  • 김은애 (연세대학교 의류환경학과)
  • Park, Mi-Kyung (Dept. of Clothing & Textiles, Yonsei University) ;
  • Lee, Ji-Yeon (Dept. of Clothing & Textiles, Yonsei University) ;
  • Kim, Eun-Ae (Dept. of Clothing & Textiles, Yonsei University)
  • 투고 : 2011.12.28
  • 심사 : 2012.04.18
  • 발행 : 2012.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study shows the optimum attachment of Two-Way Shape Memory Alloy (TWSMA) springs onto thermal liner and its sewing method for the mass production of fire fighter's intelligent turnout gear. SMA springs were attached to the fabric by four different methods and stitched by two different shapes (square and wave). The durability of the attached springs was tested by laundering up to 50 cycles. Examined were whether the springs would remain attached to the fabric after repeated laundering, the shape memory effect and reaction of the springs, and the anti-corrosiveness of the springs. A Human-Clothing-Environment simulator evaluated thermal insulation according to attachment methods, air layer volume, and stitch types. The findings showed that silicon attached springs remained intact after repeated laundering; in addition, repeated laundering did not influence the responsiveness and anti-corrosiveness of SMAs. Air volume had positive relations with the insulation. Attachment methods or stitch methods had limited impact on the thermal insulation. As a result, a wave type stitch with silicone attachment was suggested as the optimum method to attach the SMA springs onto the intelligent turnout gear for fire fighters.

키워드

참고문헌

  1. Congalton, D. (1999). Shape memory alloys for use in thermally activated clothing, protection against flame and heat. Fire and Materials, 23, 223-226. doi:10.1002/(SICI)1099- 1018(199909/10)23:5<223::AID-FAM687>3.0.CO;2-K
  2. Hwang, S. Y. (2007). Intelligent thermal insulating outdoor jacket development by shape memory alloys. Unpublished master's thesis, Yonsei University, Seoul.
  3. Kim, E. A., Yoo, S. J., & Shim, H. (2006). Performance of selected clothing systems under subzero conditions: determination of performance by a Human-Clothing-Environment simulator. Textile Research Journal, 76(4), 301-308. doi:10.1177/0040517506057529
  4. Kim, E. K., & Lee, M. S. (1997). A study on the actual condition of Korean firefighter's protective clothing. Journal of the Korean Society of Clothing and Textiles, 21(1), 93-103.
  5. Lee, J. Y. (2008). Development of fire fighters' turnout gear using two-way shape memory alloy for thermal protection. Unpublished master's thesis, Yonsei University, Seoul.
  6. Miller, D. A., & Lagoudas, D. C. (2000). Thermomechanical characterization of NiTiCu and NiTi SMA actuators: influence of plastic strains. Smart Materials and Structures, 9(5), 640-652. https://doi.org/10.1088/0964-1726/9/5/308
  7. Nocker, W., & Seibert, J. (2002). Fire fighter garment with non textile insulation. Proceedings of the RTO HFM Symposium on Blowing hot and cold: protecting against climatic extremes, Germany, 9.
  8. Park, H. J. (2009). Intelligent thermal insulation of cold protective clothing by dimension and distribution of embedded shape memory alloy springs. Unpublished master's thesis, Yonsei University, Seoul.
  9. Russell, D. A., Elton, S. F., & Congalton, D. (2001). U.S. Patent No. 6,312,784 B2. Washington, DC: U.S. Patent and Trademark Office.
  10. Yeo, J. H. (2005). Temperature adaptable thermal insulation of clothing system using SMA formed air layer and PCM. Unpublished master's thesis, Yonsei University, Seoul.

피인용 문헌

  1. Heat and mass transfer through thermal protective clothing – A review vol.106, 2016, https://doi.org/10.1016/j.ijthermalsci.2016.03.006
  2. On the Improvement of Thermal Protection for Temperature-Responsive Protective Clothing Incorporated with Shape Memory Alloy vol.11, pp.10, 2018, https://doi.org/10.3390/ma11101932