References
- Kundu, A.M., Jang, J. H., Gil, J. H., Jung, C. R., Lee, H. R., Kim, S. H., Ku, B., Oh, Y. S., 2007, "Micro- Fuel Cells- Currend Development and Applications," Journal of Power Sources, Vol. 170, No. 1, pp. 67-78. https://doi.org/10.1016/j.jpowsour.2007.03.066
- Lueke, J. and Moussa, W. A., 2011, "MEMS-Based Power Generation Techniques for Implantable Biosensing Applications," Sensors, Vol. 11, No. 2, pp. 1433-1460 https://doi.org/10.3390/s110201433
- Dutse, S. W. and Yusof, N. A., 2011, " Microfluidics- Based Lab-on-a-Chip Systems in DNA-Based Biosensing: An Overview," Sensors, Vol. 11, No. 6, pp. 5754-5768. https://doi.org/10.3390/s110605754
- Ashraf, M. W.M., Tayyaba, S. and Afzulpurkar N., 2011, "Micro Electromechanical Systems (MEMS) Based Microfluidic Devices for Biomedial Applications," International Journal of Molecular Sciences, Vol. 12, No. 6, pp. 3648-3704. https://doi.org/10.3390/ijms12063648
- Jiang, L., Mikkelsen, J., Koo J. M., Huber, D., Yao, S., Zhang, L., Zhou, P., Maverty, J. G., Prasher, R., Santiago, J. G., Kenny, T. W. and Goodson, K. E., 2002, "Closed-Loop Electroosmotic Microchannel Cooling System for VLSI Circuits," IEEE Transactions on Components and Packaging Technologies, Vol. 25, No. 3, pp. 347-354. https://doi.org/10.1109/TCAPT.2002.800599
- Buie, C. R., Kim, D., Liester, S. and Santiago, J. G., 2007, "An Electro-Osmotic Fuel Pump for Direct Methanol Fuel Cells," Electro Chemical and Solid- State Letters, Vol. 10, No. 11, pp. B196-B200. https://doi.org/10.1149/1.2772083
- Kwon, K. and Kim, D., 2010, "Air Pumps for Polymer Electrolyte Membrane Fuel Cells," Transactions of KSME (B), Vol. 34, No. 7, pp. 715-720. https://doi.org/10.3795/KSME-B.2010.34.7.715
- Litster, S., Suss, M. E. and Santiago, J. G., 2010, "A Two-Liquid Electroosmotic Pump Using Low Applied Voltage and Power," Sensors and Actuators A: Physics, Vol. 163, No. 1, pp. 311-314. https://doi.org/10.1016/j.sna.2010.07.008
- Yao, S., Hertzog, D. E., Zeng, S. and Santiago, J. G., 2003, "Porous Glass Electroosmotic Pumps: Design and Experiments," Journal of Colloid and Interface Science, Vol. 268, No. 1, pp. 143-153. https://doi.org/10.1016/S0021-9797(03)00730-6
- Kim, D., Posner J. D. and Santiago, J. G., 2008, "High Flow Rate per Power Electroosmotic Pumping Using Low Ion Density Solvents," Sensors and Actuators A: Physics, Vol. 141, No. 1, pp. 201-212. https://doi.org/10.1016/j.sna.2007.07.023
- Kwon, K. and Kim, D., 2011, "Characterization of Electroosmotic Pumps Using Methanol/Water Mixtures with Various Compositions," Sensors and Actuators A: Physics, Vol. 166, No. 1, pp. 88-93. https://doi.org/10.1016/j.sna.2010.12.016
- Zeng, S., Chen, C. H., Santiago, J. G., Chen, J. R., Zare, R. N., Tripp, J. A., Svec, F. and Frechet, J. M., 2002, "Electroosmtoci flow pumps with polymer frits," Sensors and Actuators B: Chemical, Vol. 82, No. 2-3, pp. 209-212. https://doi.org/10.1016/S0925-4005(01)01007-3
- Chen Y. F., Li, M. C., Hu, Y. H., Chang W. J. and Wang, C, C., 2008, "Low-Voltage Electroosmotic Pumping Using Porous Anodic Alumina Membranes," Microfluidics and Nanofluidics, Vol. 6, No. 2, pp. 145-162.
- Yao, S., Myers, A. M., Posner, J. D., Rose, K. and Santiago, J. G., 2006, "Electroosmotic Pumps Fabricated from Porous Silicon Membranes," Journal of Microelectromechanical Systems, Vol. 15, No. 3, pp. 717-728. https://doi.org/10.1109/JMEMS.2006.876796
- Zeng, S.M Chen, C. H., Mikkelsen, J. C. and Santiago, J. G., 2002, "Fabrication and Characterization of Electroosmotic Micropumps," Sensors and Actuators B: Chemical, Vol. 79, No. 2-3, pp. 107-114.
- Yao, S. and Santiago, J. G., 2003, "Porous Glass Electroosmotic Pumps: Theory," Journal of Colloid and Interface Science, Vol. 268, No. 1, pp. 133-142. https://doi.org/10.1016/S0021-9797(03)00731-8
- Griffiths, S. K. and Nilson, R. H., 2005, "The Efficiency of Electrokinetic Pumping at a Conditions of Maximum Work," Electrophoresis, Vol. 26, No. 1, pp. 351-361. https://doi.org/10.1002/elps.200406169
- Kwon, K., Park, C. W. and Kim, D., 2011, "Comparison of Electro-Osmotic Pumps with Two Different Types of Porous Glas Frits," Transactions of KSME (B), Vol. 35, No. 4, pp. 379-383.