DOI QR코드

DOI QR Code

A Study on the Flexural Buckling Strength $F_{cr}$ of Inelastic Buckling for Compressive Members

압축재 비탄성좌굴의 휨좌굴강도 $F_{cr}$에 대한 고찰

  • 심현주 (중앙대학교 대학원 건축학과) ;
  • 김상섭 (한국기술교육대학교 건축공학부)
  • Received : 2012.07.09
  • Published : 2012.10.25

Abstract

Many column curve formulations have appeared since the inception of L. Euler's classic theory in 1759. This paper investigates the flexural buckling strength($F_{cr}$) calculated using the Allowable Stress Design Specification and the Load and Resistance Factor Design Specification of the American Institute of Steel Construction. Herein, it is pointed out that the exponential function of column curve formulation(LRFD) is hard to use in practice. Therefore, in this study, the simple parabola function is proposed for the inelastic buckling strength of the steel column loaded in uniaxial compression that is consistent with many design codes. The expressions for inelastic buckling strength formulation defined previously by Allowable Stress Design is used here. To verify the proposed equation, a total of 118 individual test results of steel columns is surveyed. The mean of the ratio of column strength to proposed flexural buckling strength is 1.089 indicating that the proposed strength curves are in good agreement with the tests.

Keywords

Acknowledgement

Supported by : 한국기술교육대학교

References

  1. 대한건축학회, 강구조 계산규준.동해설, 1973
  2. 대한건축학회, 강구조 계산기준 및 해설, 1983
  3. 대한건축학회, 강구조 한계상태설계기준 및 해설, 1998
  4. 대한건축학회, 한계상태설계기준에 의한 강구조설계 예제집, 2002
  5. 대한건축학회, 건축구조설계기준(Korean Building Code-Structural), 2005
  6. 대한건축학회, 건축구조기준 및 해설(Korean Building Code and Commentary), 2009
  7. 한국강구조학회, 허용응력설계법에 의한 강구조설계기준, 2003
  8. 한국강구조학회, 하중저항계수설계법에 의한 강구조설계기준, 2009
  9. Euler, L. Euler's classic paper on the strength of columns, American Journal of Physics, 1947
  10. Johnson, J. B., On the Strength of Columns, ASCE, 1886
  11. Bleich, F., Buckling Strength of Metal Structures, McGraw Hill, Inc., 1952
  12. Johnston, B. G., Guide to stability design criteria for metal structures, 3d ed, Structural Stability Research Council, 1976
  13. American Institute of Steel Construction(AISC), Specification for the Design, Fabrication and Erection of Structural Steel for Buildings, 1978
  14. Bjorhovde, R., Deterministic and Probabilistic Approaches to the Strength of Steel Columns, Ph.D. Dissertation, Lehigh University. 1972
  15. Tide, R.H.R, Reasonable Column Design Equations, Proceedings, Annual Technical Session of Structural Stability Research Council, 1985
  16. Structural Stability Research Council (SSRC), Guide to Design Criteria for Metal Compression Members, 3rd ed. Edited by Bruce, 1976
  17. Tide, R.H.R., A Technical Note: Derivation of the LRFD Column Design Equations, ENGINEERING JOURNAL, v.38 no.3 , pp.137-139, 2001
  18. American Institute of Steel Construction(AISC), Load and Resistance Factor Design Specification for Structural Steel Buildings, 1986
  19. American Institute of Steel Construction(AISC), Manual of Steel Construction-Load and Resistance Factor Design, 3rd ed, 2001
  20. American Institute of Steel Construction(AISC), Steel Construction Manual, 13th ed. 2005
  21. 조재병, 임정순, 한충성, 각형 강관의 축방향 압축강도에 관한 연구, 한국강구조학회 논문집, v.10 n.2, pp.153-160, 1998
  22. 백기열, 공간구조에 적용되는 일반구조용 강관의 압축내력에 관한 연구, 한국공간구조학회논문집, 2008
  23. 임성우, 고상기, 장인화, 고장력 (SM570) 강재의 압축재 특성에 관한 연구, 한국강구조학회 논문집, v.13 n.3, pp.223-232, 2001
  24. 임성우, 김요숙, 장인화, SM570TMC 강재의 압축재 특성에 관한 연구, 한국강구조학회 논문집, v.17 no.3, pp.357-363, 2005
  25. 포항산업과학연구원, 초고층 복합빌딩사업단 1단계 연구보고서, 국토해양부, 2010
  26. Ban. H., Shi. G., Shi. Y, Overall buckling behavior of 460MPa high strength steel columns: Experimental investigation and design method, Journal of constructional steel research, v.74 , pp.140 -150,, 2012 https://doi.org/10.1016/j.jcsr.2012.02.013
  27. Rasmussen K. J. R., Hancock G. J., Tests of High Strength Steel Columns, Journal of constructional steel research, v.34 no.1 , pp.27-52, 1995 https://doi.org/10.1016/0143-974X(95)97296-A