DOI QR코드

DOI QR Code

Analysis of Plates using Isogeometric Approach based on Reissner-Mindlin Theory

RM이론에 기저한 등기하해석법을 이용한 판의 해석

  • 이상진 (경상대학교 건축공학과) ;
  • 김하룡 (경상대학교 건축공학과 계산역학연구실)
  • Received : 2012.06.30
  • Published : 2012.09.25

Abstract

A plate element based on Reissner-Mindlin (RM) theory is developed by using isogeometric approach. The non-uniform rational B-spline (NURBS) is used to represent the geometry of plate and the unknown displacement field. Therefore, all terms required in this element formulation are consistently derived by using NURBS basis function. Several numerical examples are conducted to investigate the accuracy and reliability of the present plate element. From numerical results, it is found to be that the present plate element produces the isogeometric solutions with sufficient accuracy. Finally, the present isogeometric solutions are provided as future reference solutions.

Keywords

Acknowledgement

Supported by : 국토해양부

References

  1. Lee, S.J. and Han S. E., Free-vibration analysis of plates and shells with a nine-node assumed natural degenerated shell element, J. of Sound & Vibration, 241, pp.605-633, 2001 https://doi.org/10.1006/jsvi.2000.3313
  2. Hughes, T.J.R., Cottrell, J.A. and Bazileves Y. I., Isogoemetric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement, Comput. Methods. Appl.Mech. Engrg., 194, pp.4135-4195, 2005 https://doi.org/10.1016/j.cma.2004.10.008
  3. Hughes, T.J.R, and Evans J.A., Isogeometric analysis. ICES Report 10-18, The Institute of Com-putational Engineering and Science, University of Texas Austin. 2010
  4. Irons, B.M. and Zienkiewicz, O.C. The isoparametric finite element system-a new concept in finite element analysis, Proc. Conf. Recent Advances in Stress Analysis, Royal Aeronautical Society. 1968
  5. Rogers, D.F., An introduction to NURBS: With Historical Perceptive, Academic Press, London, 2001
  6. de Boor, C., A Practical Guides to Splines, Springer-Verlag, New York, 1978
  7. Soh, A.K., Cen, S., Long, Y.Q. and Long, Z.F., A new twelve DOF quadrilateral element for analysis of thick and thin plates, Eur. J. Mech. A/Solids, 20(2), pp.299-326, 2001 https://doi.org/10.1016/S0997-7538(00)01129-3
  8. Yuan, F. and Fei, X., A universal method for including shear deformation in thin plate elements. International Journal for Numerical Method in Engineering, 34, pp.171-177, 1992 https://doi.org/10.1002/nme.1620340110