DOI QR코드

DOI QR Code

Effect of Water-Binder Ratio and Replacement Ratio of Fly Ash on the Workability and Engineering Properties of Heavy-Weight Concrete

중량 콘크리트의 유동성 및 역학적특성에 대한 물-결합재비와 플라이애쉬 치환율의 영향

  • 문재성 (경기대학교 대학원 건축공학과) ;
  • 양근혁 (경기대학교 플랜트.건축공학과) ;
  • 이호 (경북대학교 건축공학과)
  • Received : 2012.05.25
  • Published : 2012.08.25

Abstract

In this study, 10 heavy-weight concrete(HWC) mixes using magnetite aggregates were tested according to the variation of the water-to-binder ratio and the replacement ratio of fly ash. The different engineering properties of HWC, which include compressive strength development, stress-strain relationship, moduli of elasticity and rupture, splitting tensile strength and bond stress-slip relationship, were measured and compared with ACI 349 and/or CEB-FIP predictions. Test results showed that the tensile resistance capacity and long-term compressive strength gain of HWC are somewhat lower than the CEB-FIP prediction. In addition, the replacement of fly ash marginally affected the relationship of compressive strength of HWC and its engineering properties, though the amount of slip of a reinforcing bar embedded in HWC sharply increased when the replacement ratio of fly ash is above 25%. Hence, while considering the workability, compressive strength development and slip resistance against a tensile ribbed bar, the optimum replacement ratio of fly ash in HWC using magnetite aggregates can be recommended to be 15~20%.

Keywords

Acknowledgement

Supported by : 한국과학재단, 한국에너지기술평가원(KETEP)

References

  1. 한국콘크리트학회, 최신 콘크리트공학, 기문당, 2001, 802 pp.
  2. Whitte, L. P, Backstorm, J. E, "Properties of Heavy Concrete Made with Baryte Aggregates", ACI Journal, Vol.51, 1954, pp.65-88.
  3. Katharine M., "High Strength, High Density Concrete", ACI Journal(special Publication), Vol.34, 1972, pp.1587-1596.
  4. Davis, H. S., Browne, F. L., Witter, H. C., "Properties of High-Density Concrete Made with Iron Aggregates", ACI Journal, Vol.27, No.7, 1956, pp705-726.
  5. ACI Committee 349, "Code Requirements for Nuclear Safety-Related Concrete Structures (ACI 349-06)", American Concrete Institute, 2006.
  6. ACI Committee 318, "Building Code Requirements for Structural Concrete (ACI 318-05)", American Concrete Institute, 2005.
  7. Comite Euro-International du Beton (CEB-FIP), Structural Concrete: Textbook on Behavior, Design and Performance, International Federation for Structural Concrete (Fib), 1999.
  8. ACI Committee 304, "Heavyweight Concrete : Measuring, Mixing, Transporting, and Placing (ACI 304.3R-96)", American Concrete Institute, 1996.
  9. ACI Committee 301, "Specifications for Structural Concrete (ACI 301-10)",American Concrete Institute, 2010.
  10. 한국공업표준협회, KS 기준안, 한국공업표준협회, 2006.
  11. Neville, A. M., Properties of Concrete, Addison Wesley Longman Ltd., 1995.
  12. 한국콘크리트학회, 콘크리트 혼화재료, 기문당, 2001.
  13. Yang, K. H., Cho, A. R., and Song, J. K., "Effect of Water-Binder Ratio on the Mechanical Properties of Calcium Hydroxide-Based Alkali-Activated Slag Concrete," Construction and Building Materials, Vol. 29, No. 4, 2011, pp. 504-511.
  14. 윤재환 역, 포틀랜드 시멘트 및 콘크리트, 세진사, 1996.
  15. 한국콘크리트학회, 최신 콘크리트공학, 기문당, 2011.