DOI QR코드

DOI QR Code

Multilevel approach for the local nanobuckling analysis of CNT-based composites

  • Silvestre, N. (Department of Civil Engineering, ICIST, Instituto Superior Tecnico, Technical University of Lisbon) ;
  • Faria, B. (Department of Civil Engineering, ICIST, Instituto Superior Tecnico, Technical University of Lisbon) ;
  • Duarte, A. (Department of Civil Engineering, ICIST, Instituto Superior Tecnico, Technical University of Lisbon)
  • 투고 : 2012.07.25
  • 심사 : 2012.09.10
  • 발행 : 2012.09.25

초록

In the present paper, a multilevel approach for the local nanobuckling analysis of carbon nanotube (CNT) based composite materials is proposed and described. The approach comprises four levels, all of them at nanoscale. The first level aims to propose the potential that describes the interatomic forces between carbon atoms. In the second level, molecular dynamics simulations are performed to extract the elastic properties of the CNT. The third level aims to determine the stiffness of the material that surrounds the CNT (matrix), using the annular membrane analysis. In the fourth level, finite strip analysis of the CNT elastically restrained by the matrix is performed to calculate the critical strain at which the CNT buckles locally. In order to achieve accurate results and take the CNT-matrix interaction into account, the $3^{rd}$ and $4^{th}$ steps may be repeated iteratively until convergence is achieved. The proposed multilevel approach is applied to several CNTs embedded in a cylindrical representative volume element and illustrated in detail. It shows that (i) the interaction between the CNT and the matrix should be taken into account and (ii) the buckling at nanoscale is sensitive to several types of local buckling modes.

키워드

과제정보

연구 과제번호 : Modelling and Analysis of Nanostructures: Carbon Nanotubes and Nanocomposites

참고문헌

  1. Agrawal, P.M., Sudalayandi, B.S., Raff, L.M. and Komanduri, R. (2006), "A comparison of different methods of Young's modulus determination for single-wall carbon nanotubes (SWCNT) using molecular dynamics (MD) simulations", Comput. Mater. Sci., 38(2), 271-281. https://doi.org/10.1016/j.commatsci.2006.02.011
  2. Cooper, C.A. and Young, R.J. (2000), "Investigation into the deformation of carbon nanotubes and their composites through the use of Raman spectroscopy", Proceedings of the SPIE - Optical Devices and Diagnostics in Materials Science, 4098.
  3. CUFSM (2006), Elastic buckling analysis of thin-walled members by finite strip analysis, CUFSM v3.12. Available from http://www.ce.jhu.edu/bschafer
  4. Desai, A.V. and Haque, M.A. (2005), "Mechanics of the interface for carbon nanotube-polymer composites", Thin Wall.Struct., 43(11), 1787-1803. https://doi.org/10.1016/j.tws.2005.07.003
  5. Faria, B., Silvestre, N. and Canongia Lopes, J.N. (2011), "Interaction diagrams for carbon nanotubes under combined shortening-twisting", Compos.Sci. Technol., 71(16), 1811-1818. https://doi.org/10.1016/j.compscitech.2011.08.006
  6. Han, Y. and Elliott, J. (2007), "Molecular dynamics simulations of the elastic properties of polymer/carbon nanotube composites", Comput. Mater. Sci., 39(2), 315-323. https://doi.org/10.1016/j.commatsci.2006.06.011
  7. Huang, Y., Wu, J. and Hwang, K.C. (2006), "Thickness of graphene and single-wall carbon nanotubes", Phys. Rev. B., 74(24), 245413-9. https://doi.org/10.1103/PhysRevB.74.245413
  8. Kitipornchai, S., He, X.Q. and Liew, K.M. (2005), "Buckling analysis of triple-walled carbon nanotubes embedded in an elastic matrix", J. Appl. Phys., 97(11), 114318. https://doi.org/10.1063/1.1925334
  9. Leung, A.Y.T., Wu, Y.D. and Zhong, W.F. (2006), "Computation of Young's moduli for chiral single-walled carbon nanotubes", Appl. Phys.Lett., 88, 251908. https://doi.org/10.1063/1.2201637
  10. Plimpton, S. (1995), "Fast parallel algorithms for short-range molecular dynamics", J. Comput. Phys., 117, 1-19. https://doi.org/10.1006/jcph.1995.1039
  11. Qian, D., Dickey, E., Andrews, R. and Rantell, T. (2000), "Load transfer and deformation mechanisms in carbon nanotube-polystyrene composites", Appl. Phys. Lett., 76(20), 2868-2870. https://doi.org/10.1063/1.126500
  12. Seidel, G.D. and Lagoudas, D.C. (2006), "Micromechanical analysis of the effective elastic properties of carbon nanotube reinforced composites", Mech. Mater., 38(8-10), 884-907. https://doi.org/10.1016/j.mechmat.2005.06.029
  13. Silvestre, N., Faria, B. and Canongia Lopes, J.N. (2012), "A Molecular dynamics study on the thickness and postcritical strength of carbon nanotubes", Compos. Struct., 94(4), 1352-1358. https://doi.org/10.1016/j.compstruct.2011.10.029
  14. Song, Y.S. and Youn, J.R. (2006), "Modeling of effective elastic properties for polymer based carbon nanotube composites", Polymer, 47(5), 1741-1748. https://doi.org/10.1016/j.polymer.2006.01.013
  15. Stuart, S., Tutein, A.B. and Harrison, J.A. (2000), "A reactive potential for hydrocarbons with intermolecular interactions", J. Chem.Phys., 112, 6472-6486. https://doi.org/10.1063/1.481208
  16. Talukdar, K. and Mitra, A.K. (2010), "Influence of odd and even number of stone-wales defects on the fracture behaviour of an armchair single-walled carbon nanotube under axial and torsional strain", Molecular Simulation, 36(6), 409-417. https://doi.org/10.1080/08927020903530971
  17. Tserpes, K.I., Papanikos, P., Labeas, G. and Pantelakis, Sp.G. (2008), "Multi-scale modeling of tensile behavior of carbon nanotube-reinforced composites", Theor. Appl. Fract. Mec., 49(1), 51-60. https://doi.org/10.1016/j.tafmec.2007.10.004
  18. Wan, H., Delale, F. and Shen, L. (2005), "Effect of CNT length and CNT-matrix interphase in carbon nanotube (CNT) reinforced composites", Mech. Res.Commun., 32(5), 481-489. https://doi.org/10.1016/j.mechrescom.2004.10.011
  19. Wang, B.L., Hoffman, M. and Yu, A.B. (2012), "Buckling analysis of embedded nanotubes using gradient continuum theory", Mech. Mater., 45, 52-60. https://doi.org/10.1016/j.mechmat.2011.10.003
  20. Wang, Q., Liew, K.M. and Duan, W.H. (2008), "Modeling of the mechanical instability of carbon nanotubes", Carbon, 46(2), 285-290. https://doi.org/10.1016/j.carbon.2007.11.022
  21. Yakobson, B.I., Brabec, C.J. and Bernholc, J. (1996), "Nanomechanics of carbon tubes: instabilities beyond linear response", Phys. Rev. Lett., 76(14), 2511-2514. https://doi.org/10.1103/PhysRevLett.76.2511

피인용 문헌

  1. Buckling analysis of structures under combined loading with acceleration forces vol.52, pp.5, 2014, https://doi.org/10.12989/sem.2014.52.5.1051
  2. Radial deformation and band-gap modulation of pressurized carbon nanotubes vol.2, pp.2, 2013, https://doi.org/10.12989/csm.2013.2.2.147
  3. Compressive behavior of CNT-reinforced aluminum composites using molecular dynamics vol.90, 2014, https://doi.org/10.1016/j.compscitech.2013.09.027