DOI QR코드

DOI QR Code

An investigation on the mortars containing blended cement subjected to elevated temperatures using Artificial Neural Network (ANN) models

  • Ramezanianpour, A.A. (Concrete Technology and Durability Research Center, Amirkabir University of Technology) ;
  • Kamel, M.E. (Department of Civil Engineering, College of Engineering, University of Tehran) ;
  • Kazemian, A. (Department of Civil Engineering, Amirkabir University of Technology) ;
  • Ghiasvand, E. (Department of Civil Engineering, Amirkabir University of Technology) ;
  • Shokrani, H. (Department of Civil Engineering, Amirkabir University of Technology) ;
  • Bakhshi, N. (Department of Civil Engineering, Amirkabir University of Technology)
  • 투고 : 2012.03.01
  • 심사 : 2012.06.02
  • 발행 : 2012.12.25

초록

This paper presents the results of an investigation on the compressive strength and weight loss of mortars containing three types of fillers as cement replacements; Limestone Filler (LF), Silica Fume (SF) and Trass (TR), subjected to elevated temperatures including $400^{\circ}C$, $600^{\circ}C$, $800^{\circ}C$ and $1000^{\circ}C$. Results indicate that addition of TR to blended cements, compared to SF addition, leads to higher compressive strength and lower weight loss at elevated temperatures. In order to model the influence of the different parameters on the compressive strength and the weight loss of specimens, artificial neural networks (ANNs) were adopted. Different diagrams were plotted based on the predictions of the most accurate networks to study the effects of temperature, different fillers and cement content on the target properties. In addition to the impressive RMSE and $R^2$ values of the best networks, the data used as the input for the prediction plots were chosen within the range of the data introduced to the networks in the training phase. Therefore, the prediction plots could be considered reliable to perform the parametric study.

키워드

참고문헌

  1. Alaa M. Rashad and Elsokary, T. (2011), "Effect of elevated temperature on physico-mechanical properties of blended cement concrete", Constr. Build Mater., 25(2), 1009-1017. https://doi.org/10.1016/j.conbuildmat.2010.06.078
  2. Anwar Hossain, K. (2006), "Macro and microstructural investigations on strength and durability of pumice concrete at high temperature", J. Mater. Civil Eng., 18(4), 527-536. https://doi.org/10.1061/(ASCE)0899-1561(2006)18:4(527)
  3. Ayd n, S. (2008), "Development of a high-temperature-resistant mortar by using slag and pumice", Fire Safety J., 43(8), 610-617. https://doi.org/10.1016/j.firesaf.2008.02.001
  4. Ayd n, S. and Baradan, B. (2007), "Effect of pumice and fly ash incorporation on high temperature resistance of cement based mortars", Cement Concrete Res., 37(6), 988-995. https://doi.org/10.1016/j.cemconres.2007.02.005
  5. Bazant, Z.P. and Kaplan, M.F. (1996), Concrete at high temperatures: Material properties and mathematical models, London, UK: Longman.
  6. Bazant, Z.P. and Kaplan, M.F. (1996), Concrete at high temperatures, Longman Addison-Wesley, London.
  7. Culfic, M.S. and Ozturan, T. (2002), "Effect of elevated temperatures on the residual mechanical properties of high-performance mortar", Cement Concrete Res., 32(5), 809-816. https://doi.org/10.1016/S0008-8846(02)00709-3
  8. Demir, F. (2008), "Prediction of elastic modulus of normal and high strength concrete by articial neural networks", Constr. Build Mater., 22(7), 1428-1435. https://doi.org/10.1016/j.conbuildmat.2007.04.004
  9. Demirel, B. and Kele temur, O. (2010), "Effect of elevated temperature on the mechanical properties of concrete produced with nely ground pumice and silica fume", Fire Safety J., 45(6-8), 385-391. https://doi.org/10.1016/j.firesaf.2010.08.002
  10. Dias, D.P.S., Khoury, G.A. and Sullivan, P.J.E. (1990), "Mechanical properties of hardened cement paste exposed to temperatures up to $700^{\circ}C$ $(1,292^{\circ}F)$", ACI Mater. J., 87(2), 160-165.
  11. Jeyasehar, C.A. and Sumangala, K. (2006), "Damage assessment of prestressed concrete beams using articial neural network (ANN) approach", Comput. Struct., 84(26-27), 1709-1718. https://doi.org/10.1016/j.compstruc.2006.03.005
  12. Ji, T., Lin, T. and Lin, X. (2006), "A concrete mix proportion design algorithm based on artificial neural networks", Cement. Concrete Res., 36(7), 1399-1408. https://doi.org/10.1016/j.cemconres.2006.01.009
  13. Kewalramani, M.A. and Gupta, R. (2006), "Concrete compressive strength prediction using ultrasonic pulse velocity through artificial neural networks", Automat Constr., 15(3), 374-379. https://doi.org/10.1016/j.autcon.2005.07.003
  14. Khoury, G.A. (1999), "Compressive strength of concrete at high temperatures: A reassessment", Mag. Concrete Res., 44(161), 291-309.
  15. Lin, W.M., Lin, T.D. and Powers-Couche, L.J. (1996), "Microstructures of fire-damaged concrete", ACI Mater. J., 93(3), 199-205.
  16. Lin, Y., Lai, C.P. and Yen, T. (2003), "Prediction of ultrasonic pulse velocity (UPV) in concrete", ACI Mater. J., 100(1), 21-28.
  17. Malhotra, H.L. (1956), "Effect of temperature on the compressive strength of concrete", Mag. Concrete Res., 8(23), 85-94. https://doi.org/10.1680/macr.1956.8.23.85
  18. Morsy, M.S., Alsayed, S.H. and Aqel, M. (2010), "Effect of elevated temperature on mechanical properties and microstructure of silica flour concrete", IJCEE., 10(1), 1-6.
  19. Petzold, A. and Rohr, M. (1970), Concrete for high temperatures, london, UK: Maclaren and Sons, 232.
  20. Piasta, J. (1984), "Heat deformations of cement phases and the microstructure of cement paste", Mater. Struct., 17(102), 415-420.
  21. Poon, C.S., Shui, Z.H. and Lam, L. (2004), "Compressive behavior of fiber reinforced high-performance concrete subjected to elevated temperatures", Cement Concrete Res., 34(12), 2215-2222. https://doi.org/10.1016/j.cemconres.2004.02.011
  22. Ramezanianpour, A.A., Ghiasvand, E., Nickseresht, I., Mahdikhani, M. and Moodi, F. (2009), "Influence of various amounts of limestone powder on performance of Portland limestone cement concretes", Cement Concrete Comp., 31(10), 715-720. https://doi.org/10.1016/j.cemconcomp.2009.08.003
  23. Riley, M.A. (1991), "Possible new method for assessment of fire damaged concrete", Mag. Concrete Res., 43(155), 87-92. https://doi.org/10.1680/macr.1991.43.155.87
  24. Xiaoa, J. and Falkner, H. (2006), "On residual strength of high-performance concrete with and without polypropylene bres at elevated temperatures", Fire Safety J., 41(2), 115-121. https://doi.org/10.1016/j.firesaf.2005.11.004
  25. Ye, G., Liu, X., De Schutter, G., Taerwe, L. and Vandevelde, P. (2007), "Phase distribution and microstructural changes of self-consolidating cement paste at elevated temperature", Cement Concrete Res., 37(6), 978-987. https://doi.org/10.1016/j.cemconres.2007.02.011
  26. Yuzer, N., Akbas, B. and Kizilkanat, A.B. (2011), "Predicting the high temperature effect on mortar compressive strength by neural network", Comput. Concrete, 8(5), 491-511. https://doi.org/10.12989/cac.2011.8.5.491