Computers and Concrete

  • 제10권6호
  • /
  • Pages.631-647
  • /
  • 2012
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Application of Fuller's ideal curve and error function to making high performance concrete using rice husk ash

  • Hwang, Chao-Lung (Department of Construction Engineering, National Taiwan University of Science and Technology) ;
  • Bui, Le Anh-Tuan (Department of Construction Engineering, National Taiwan University of Science and Technology) ;
  • Chen, Chun-Tsun (Department of Construction Engineering, National Taiwan University of Science and Technology)
  • 투고 : 2011.12.15
  • 심사 : 2012.05.31
  • 발행 : 2012.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper focuses on the application of Fuller's ideal gradation curve to theoretically design blended ratio of all solid materials of high performance concrete (HPC), with the aid of error function, and then to study the effect of rice husk ash (RHA) on the performance of HPC. The residual RHA, generated when burning rice husk pellets at temperatures varying from 600 to $800^{\circ}C$, was collected at steam boilers in Vietnam. The properties of fresh and hardened concrete are reviewed. It is possible to obtain the RHA concrete with comparable or better properties than those of the specimen without RHA with lower cement consumption. High flowing concrete designed by the proposed method was obtained without bleeding or segregation. The application of the proposed method for HPC can save over 50% of the consumption of cement and limit the use of water. Its strength efficiency of cement in HPC is 1.4-1.9 times higher than that of the traditional method. Local standards of durability were satisfied at the age of 91 days both by concrete resistivity and ultrasonic pulse velocity.

키워드

참고문헌

  1. ACI 211.1 (1996), Standard practice for selecting proportions for normal, heavyweight, and mass concrete, ACI Manual of Concrete Practice.
  2. Atcin, P. (1998), High-performance concrete, E. & F.N. Spon.
  3. ASTM C597 (2002), Standard test method for pulse velocity through concrete, Annual Book of ASTM Standard 04.
  4. Buenfeld, N.R., Newman, J.B. and Page, C.L. (1986), "The resistivity of mortars immersed in sea-water", Cement Concrete Res., 16(4), 511-524. https://doi.org/10.1016/0008-8846(86)90089-X
  5. Bui, D.D., Hu, J. and Stroeven, P. (2005), "Particle size effect on the strength of rice husk ash blended gapgraded Portland cement concrete", Cement Concrete Comp., 27(3), 357-366. https://doi.org/10.1016/j.cemconcomp.2004.05.002
  6. Chen, J.C., Hwang, C.L. and Tsai, D.H. (1995), "Research and development of high performance concrete in Taiwan", Concrete Int., 17(10), 1-76.
  7. Cordeiro, G., Toledo Filho, R. and de Moraes Rego Fairbairn, E. (2009), "Use of ultrafine rice husk ash with high-carbon content as pozzolan in high performance concrete", Mater. Struct., 42(7), 983-992. https://doi.org/10.1617/s11527-008-9437-z
  8. Fuller, W.B. and Thompson, S.E. (1906), "The Laws of proportioning concrete", Trans. ASCE., LVII(2), 67-143.
  9. Goncalves, M.R.F. and Bergmann, C.P. (2007), "Thermal insulators made with rice husk ashes: Production and correlation between properties and microstructure", Constr. Build Mater., 21(12), 2059-2065. https://doi.org/10.1016/j.conbuildmat.2006.05.057
  10. Hope, B.B., Ip, A.K. and Manning, D.G. (1985), "Corrosion and electrical impedance in concrete", Cement Concrete Res., 15(3), 525-534. https://doi.org/10.1016/0008-8846(85)90127-9
  11. Hwang, C.L., Chang, P.K. and Peng, Y.N. (2001), "Application of high-performance concrete to high-rise building in Taiwan", Adv. Struct. Eng., 4(2), 65-73. https://doi.org/10.1260/1369433011502363
  12. Hwang, C.L. (2003), The theory and practice of high peformance concrete, Janes' Book Publisher Co., Taipei, Taiwan.
  13. Hwang, C.L. and Chandra, S. (1996), The use of rice husk ash in concrete, William Andrew Publishing, Westwood, NJ.
  14. Hwang, C.L. and Chen, Y.Y. (1998), "Evaluation of compressive strength of high performance concrete by ultrasonic pulse velocity", J. Chin Inst. Civil Hydraul Eng., 10(3), 591-594.
  15. Hwang, C.L. and Chen, Y.Y. (2002), "The property of self-consolidating concrete designed by desified mixture design algorithm", Proceeding of First North American Conference on the Design and Use of Consolidating Concrete.
  16. Hwang, C.L. and Wu, D.S. (1989), "Properties of cement paste containing rice husk ash", ACI Mater. J., 114, 733-762.
  17. Isaia, G.C., Gastaldini, A.L.G. and Moraes, R. (2003), "Physical and pozzolanic action of mineral additions on the mechanical strength of high-performance concrete", Cement Concrete Comp., 25(1), 69-76. https://doi.org/10.1016/S0958-9465(01)00057-9
  18. Kosmatka, S., Panarese, W. and Association, P.C. (1995), Design and control of concrete mixtures, Portland Cement Association.
  19. Lee, L.S. and Hwang, C.L. (2002), "A quality assurance system of SCC in Taiwan", Proceeding of First North American Conference on the Design and Use of Consolidating Concrete.
  20. Malhotra, V. (2002), "High performance concrete: performance and quality of concrete structures", Proceedings, Third International Conference, American Concrete Institute.
  21. Malhotra, V.M. (1976), Testing hardened concrete: Nondestructure methods, American Concrete Institute Monograph Series.
  22. Mehta, P.K. (1986), Concrete-structure, properties and materials, New York: Prentice-Hall Inc.
  23. Mindess S, Y.J. (1981), Concrete, New York: Prentice-Hall Inc.
  24. Mora, C.F., Kwan, A.K.H. and Chan, H.C. (1998), "Particle size distribution analysis of coarse aggregate using digital image processing", Cement Concrete Res., 28(6), 921-932. https://doi.org/10.1016/S0008-8846(98)00043-X
  25. Neville, A. (1997), "Water and concrete: A love-hate relationship", Concrete Int., 22(12), 34-38.
  26. Okamura, H. (1997), "Self Compacting High Performance Concrete", Concrete Int., 19(7), 50-54.
  27. Rodriguez de Sensale, G. (2010), "Effect of rice-husk ash on durability of cementitious materials", Cement Concrete Comp., 32(9), 718-725. https://doi.org/10.1016/j.cemconcomp.2010.07.008
  28. Safiuddin, M., West, J.S. and Soudki, K.A. (2010), "Hardened properties of self-consolidating high performance concrete including rice husk ash", Cement Concrete Comp., 32(9), 708-717. https://doi.org/10.1016/j.cemconcomp.2010.07.006
  29. Salas, A., Delvasto, S., de Gutierrez, R.M. and Lange, D. (2009), "Comparison of two processes for treating rice husk ash for use in high performance concrete", Cement Concrete Res., 39(9), 773-778. https://doi.org/10.1016/j.cemconres.2009.05.006
  30. Saraswathy, V. and Song, H.W. (2007), "Corrosion performance of rice husk ash blended concrete", Constr. Build Mater., 21(8), 1779-1784. https://doi.org/10.1016/j.conbuildmat.2006.05.037
  31. Su, N. and Miao, B. (2003), "A new method for the mix design of medium strength flowing concrete with low cement content", Cement Concrete Comp., 25(2), 215-222. https://doi.org/10.1016/S0958-9465(02)00013-6
  32. Sumrerng, R. and Prinya, C. (2008), "Mathematical model of strength and porosity of ternary blend Portland rice husk ash and fly ash cement mortar". Comput. Concrete, 5(1), 1-6. https://doi.org/10.12989/cac.2008.5.1.001
  33. Tsai, C.T., Li, L.S. and Hwang, C.L. (2009), "Durability design and application of steel fiber reinforced concrete in taiwan", Arab. J. Sci. Eng., 34(1B), 57-59.
  34. Zerbino, R., Giaccio, G. and Isaia, G.C. (2011), "Concrete incorporating rice-husk ash without processing", Constr. Build Mater., 25(1), 371-378. https://doi.org/10.1016/j.conbuildmat.2010.06.016
  35. Zhang, M.H., Lastra, R. and Malhotra, V.M. (1996), "Rice-husk ash paste and concrete: Some aspects of hydration and the microstructure of the interfacial zone between the aggregate and paste", Cement Concrete Res., 26(6), 963-977. https://doi.org/10.1016/0008-8846(96)00061-0

피인용 문헌

  1. Influence of paste thickness on coated aggregates on properties of high-density sulphoaluminate cement concrete vol.115, 2016, https://doi.org/10.1016/j.conbuildmat.2016.04.018
  2. Influence of silpozz and rice husk ash on enhancement of concrete strength vol.3, pp.3, 2015, https://doi.org/10.12989/acc.2015.3.3.203
  3. Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model vol.163, 2018, https://doi.org/10.1016/j.conbuildmat.2017.12.112
  4. Recycling of Waste Limestone as Fine Aggregate for Conventional and Green Concretes vol.928, pp.1662-9752, 2018, https://doi.org/10.4028/www.scientific.net/MSF.928.257