DOI QR코드

DOI QR Code

Finishing methods and compressive strength-void ratio relationships of in-situ porous concrete pavement

  • Hatanaka, Shigemitsu (Department of Architecture, Faculty of Engineering, Mie University) ;
  • Mishima, Naoki (Department of Architecture, Faculty of Engineering, Mie University) ;
  • Nakagawa, Takeshi (Department of Architecture, Faculty of Engineering, Mie University) ;
  • Morihana, Hirotomo (Department of Architecture, Faculty of Engineering, Mie University) ;
  • Chindaprasirt, Prinya (Sustainable Infrastructure Research and Development Center, Department of Civil Engineering, Faculty of Engineering, Khon Kaen University)
  • Received : 2011.03.05
  • Accepted : 2012.03.10
  • Published : 2012.09.25

Abstract

In this paper, the effect of finishing methods on the relationships between compressive strength, permeability and void ratio of porous concrete (POC) or pervious concrete is discussed, using core specimens taken from actually constructed POC pavement. To attain reliable performance in the construction work, a newly designed finisher for POC is developed, and the performances as well as methods for controlling void ratio are examined. The POC pavements were finished with three finishing methods viz., no finishing, finishing with standard compactor and finishing with prototype compactor. The results show that the prototype POC finisher is efficient in controlling the void ratio and the quality of POC pavements. The relationships between compressive strength as well as permeability and void ratio of the in-situ POC pavements finished by the prototype machine were obtained. They are slightly different from the laboratory test results owing mainly to the mold effect and the differences in compaction modes.

Keywords

References

  1. ASTM C 39/39M-10 (2010), "Standard test method for compressive strength of cylindrical concrete specimens", Annual Book of ASTM Standards, Philadelphia.
  2. Chindaprasirt, P., Hatanaka, S., Chareerat, T., Mishima, N. and Yuasa, Y. (2008), "Cement paste characteristics and porous concrete properties", Constr. Build. Mater., 22(5), 894-901.
  3. Chindaprasirt, P., Hatanaka, S., Mishima, N., Yuasa, Y. and Chareerat, T. (2009), "Effect of binder strength and aggregate size on the compressive strength and void ratio of porous concrete", Int. J. Miner Metal. Mater., 16(6), 714-719.
  4. Duckworth, W. (1953), "Discussion of ryshkewitch paper by winston duckworth", J. Am. Ceram. Soc., 36(2), 68. https://doi.org/10.1111/j.1151-2916.1953.tb12838.x
  5. Fujiwara, H., Tomita, R., Okamoto, T., Dozono, A. and Okabe, A. (1998), "Properties of high-strength porous concrete", ACI special publication, 179, 173-188.
  6. Ghafoori, N. (1995), "Development of no-fines concrete pavement applications", J. Transp. Eng.-ASCE, 121(3), 283-288. https://doi.org/10.1061/(ASCE)0733-947X(1995)121:3(283)
  7. Japan Concrete Institute (2004), "Technical committee on establishment of design and practical method of porous concrete, proc. of the jci symposium on design construction and recent application of porous concrete", Japan Concrete Institute (in Japanese).
  8. Japan Concrete Institute (1995), "Technical committee report on super stiff consistency concrete", Japan Concrete Institute (in Japanese).
  9. Keven, J., Wang, K., Suleiman, M.T. and Schaefer, V.R. (2006), "Pervious concrete construction: Methods and quality control", NRMCA Concrete technology forum; Focus on pervious concrete, 1-14.
  10. Lian, C. and Zhuge, Y. (2010), "Optimum mix design of enhanced permeable concrete.an experimental investigation", Constr. Build. Mater., 24(12), 2664-2671. https://doi.org/10.1016/j.conbuildmat.2010.04.057
  11. Meininger, R. (1998), "No-fines pervious concrete for paving", ACI Concrete Inter., 20-27.
  12. Nakagawa, T., Hatanaka, H. and Mishima, N. (2010), "Influence of height / diameter ratio of specimen on compressive strength of porous concrete", J. Struct. Constr. Eng., AIJ, 650, 695-699.
  13. Ryshkewitch, E. (1953), "Compression strength of porous sintered alumina and zirconia", J. Am. Ceram. Soc., 36(2), 65-68. https://doi.org/10.1111/j.1151-2916.1953.tb12837.x
  14. Schaefer, V.R., Wang, K., Sulieman, M.T. and Kevern, J.T. (2006), "Mix design development for pervious concrete in cold weather climates", Final Report, Iowa Department of Transportation. National Concrete Pavement Technology Center, Iowa Concrete Paving Association.
  15. Tran, X.H., Tawie, R. and Lee, H.K. (2009), "A systematic approach for the development of porous concrete based on axiomatic design theory", Comput. Concrete, 6(6), 491-503. https://doi.org/10.12989/cac.2009.6.6.491
  16. Yanagibashi, K. and Yonezawa, T. (1998), "Properties and performance of green concrete", ACI special publication, 179, 141-158.
  17. Yang, J. and Jiang, G. (2003), "Experimental study on properties of pervious concrete pavement materials", Cement Concrete Res., 33(3), 381-386. https://doi.org/10.1016/S0008-8846(02)00966-3
  18. Yuasa, Y., Hatanaka, S., Mishima, N., Maegawa, A. and Miyamoto, T. (2002), "Experimental study on compaction with vibration for porous concrete", J. Struct. Constr. Eng., AIJ, 552, 37-44.

Cited by

  1. Fundamental Study on Properties of Small Particle Size Porous Concrete vol.12, pp.1, 2014, https://doi.org/10.3151/jact.12.24
  2. Mechanical and Thermal Properties of Recycling Lightweight Pervious Concrete vol.40, pp.2, 2015, https://doi.org/10.1007/s13369-014-1563-z
  3. Optimum Design and Performance of Porous Concrete for Heavy-Load Traffic Pavement in Cold and Heavy Rainfall Region of NE China vol.2018, pp.1687-8442, 2018, https://doi.org/10.1155/2018/7082897
  4. Porous concrete with optimum fine aggregate and fibre for improved strength vol.8, pp.4, 2012, https://doi.org/10.12989/acc.2019.8.4.305
  5. Moving particle simulation for a simplified permeability model of pervious concrete vol.24, pp.6, 2012, https://doi.org/10.12989/cac.2019.24.6.571