Computers and Concrete

  • 제10권2호
  • /
  • Pages.173-196
  • /
  • 2012
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Analytical simulation of reversed cyclic lateral behaviors of an RC shear wall sub-assemblage

  • Lee, Han Seon (School of Civil, Environmental, and Architectural Engineering, Korea University) ;
  • Jeong, Da Hun (School of Civil, Environmental, and Architectural Engineering, Korea University) ;
  • Hwang, Kyung Ran (School of Civil, Environmental, and Architectural Engineering, Korea University)
  • 투고 : 2011.07.26
  • 심사 : 2012.02.02
  • 발행 : 2012.08.25
⟨ 이전 논문 다음 논문 ⟩

초록

Experimental results of cyclic reversed lateral force test on a two-story reinforced concrete shear wall sub-assemblage are simulated analytically by using the PERFORM-3D program. A comparison of experimental and analytical results leads to the following conclusions: (1) "Shear Wall" and "General Wall" models with "Concrete shear" cannot simulate the pinching phenomena due to shear and show larger amounts of inelastic energy absorption than those in the experiment. (2) Modeling a story-height wall by using two or more "General Wall" elements with "Diagonal shear" in the vertical direction induces the phenomenon of swelling-out at the belly, leading to the erroneous simulation of shear behaviors. In application to tall building structures, it is recommended to use one element of "General Wall" with "Diagonal shear" for the full height of a story. (3) In the plastic hinge area, concrete deformations of analytical models overestimate elongation and underestimate shortening when compared with experimental results.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation of Korea

참고문헌

  1. ACI Committee 318 (2002), Building code requirements for structural concrete and commentary (ACI 18-02/ 318R-02), American Concrete Institute, Detroit.
  2. ASCE/SEI 41-06 (2007), Seismic rehabilitation of existing buildings, American Society of Civil Engineers.
  3. Computers & Structures, Inc. (2006), ETABS Plus version 9.1.1 Extended analysis of 3D building systems, Berkeley, California.
  4. Computers & Structures, Inc. (2006), PERFORM Components and elements for PERFORM 3D and PERFORMCollaspse ver 4, CSI, Berkeley, CA.
  5. FEMA-356 (2000), Prestandard and commentary for the seismic rehabilitation of buildings, Federal Emergency Management Agency.
  6. Korea National Statistical Office (2010), Population and housing census 2010. (in Korean)
  7. Kwak, H.G. and Kim, D.Y. (2004), "Cracking behavior of RC shear walls subject to cyclic loadings", Comput. Concrete, 1(1), 77-98. https://doi.org/10.1296/CAC2004.01.01.06
  8. Lee, S.H., Oh, S.H., Hwang, W.T., Park H.G., Kim, D.K. and Lee, H.S. (2010), "Static experiment for the seismic performance of a 2 story RC shear wall system", J. Earthq. Eng. Soc. Kor., (EESK), 14(6), 55-66. (in Korean) https://doi.org/10.5000/EESK.2010.14.6.055
  9. Martinelli, P. and Filippou, F.C. (2009), "Simulation of the shaking table test of a seven-story shear wall building", Earthq. Eng. Struct. D., 38(5), 587-607. https://doi.org/10.1002/eqe.897
  10. McKenna, F., Fenves, G.L. and Scott, M.H. (2006), Open system for earthquake engineering simulation, University of California, Berkeley, CA.
  11. Mo, Y.L., Zhong, J. and Hsu, T.T.C. (2008), "Seismic simulation of RC wall-type structures", Eng. Struct., 30(11), 3167-3175. https://doi.org/10.1016/j.engstruct.2008.04.033
  12. Orakcal, K. and Wallace, W.J. (2006), "Flexural modeling of reinforced concrete walls - experimental verification", ACI Struct. J., 103(2), 196-206.
  13. Orakcal, K., Massone, L.M. and Wallace, J.W. (2009), "Shear strength of lightly reinforced wall piers and spandrels", ACI Struct. J., 106(4), 455-465.
  14. Panagiotou, M., Restrepo, J.I., Conte, J.P. and Englekirk, R.E. (2006), "Seismic response of reinforced concrete wall buildings", Proceedings of the 8th U.S. National Conference on Earthquake Engineering, San Francisco, CA, U.S.A.
  15. Paulay, T. and Priestly, M.J.N. (1992), Seismic design of reinforced concrete and masonry buildings, John Wiley & Sons, Inc.
  16. PEER/ATC-72-1 (2010), Modeling and acceptance criteria for seismic design and analysis of tall buildings.
  17. Powell, G.H. (2011), Personal communication, Graham H. Powell, Inc. Wolfgang Road Truckee, California.
  18. Schotanus, M.I.J. and Maffei, J.R. (2008), "Computer modeling and effective stiffness of concrete wall buildings", Proceedings of the International FIB Symposium on Tailor Made Concrete Structures -New Solutions for Our Society, Amsterdam, Netherlands.
  19. Wallace, W.J. (2007), "Modeling issues for tall reinforced concrete core wall buildings", Struct. Des. Tall Spec., 16(5), 615-632. https://doi.org/10.1002/tal.440

피인용 문헌

  1. Seismic performance of a 10-story RC box-type wall building structure vol.9, pp.6, 2015, https://doi.org/10.12989/eas.2015.9.6.1193
  2. Seismic Performance Analysis of a Connected Multitower Structure with FPS and Viscous Damper vol.2018, pp.1875-9203, 2018, https://doi.org/10.1155/2018/1865761