Computers and Concrete

  • 제10권2호
  • /
  • Pages.95-104
  • /
  • 2012
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Properties of recycled green building materials applied in lightweight aggregate concrete

  • Wang, Her-Yung (Department of Civil Engineering, National Kaohsiung University of Applied Sciences) ;
  • Hsiao, Darn-Horng (Department of Civil Engineering, National Kaohsiung University of Applied Sciences) ;
  • Wang, Shi-Yang (Department of Civil Engineering, National Kaohsiung University of Applied Sciences)
  • 투고 : 2010.06.04
  • 심사 : 2011.06.22
  • 발행 : 2012.08.25
⟨ 이전 논문 다음 논문 ⟩

초록

This study uses recycled green building materials based on a Taiwan-made recycled mineral admixture (including fly ash, slag, glass sand and rubber powder) as replacements for fine aggregates in concrete and tests the properties of the resulting mixtures. Fine aggregate contents of 5% and 10% were replaced by waste LCD glass sand and waste tire rubber powder, respectively. According to ACI concrete-mixture design, the above materials were mixed into lightweight aggregate concrete at a constant water-to-binder ratio (W/B = 0.4). Hardening (mechanical), non-destructive and durability tests were then performed at curing ages of 7, 28, 56 and 91 days and the engineering properties were studied. The results of these experiments showed that, although they vary with the type of recycling green building material added, the slumps of these admixtures meet design requirements. Lightweight aggregate yields better hardened properties than normal-weight concrete, indicating that green building materials can be successfully applied in lightweight aggregate concrete, enabling an increase in the use of green building materials, the improved utilization of waste resources, and environmental protection. In addition to representing an important part of a "sustainable cycle of development", green building materials represent a beneficial reutilization of waste resources.

키워드

참고문헌

  1. Batayneh, M.K., Marie, I. and Asi, I. (2008), "Promoting the use of crumb rubber concrete in developing countries", Waste Manage, 28(11), 2171-2176. https://doi.org/10.1016/j.wasman.2007.09.035
  2. Benazzouk, A., Douzane, O., Langlet, T., Mezreb, K., Roucoult, J.M. and Queneudec, M. (2007), "Physicomechanical properties and water absorption of cement composite containing shredded rubber wastes", Cement Concrete Comp., 29(10), 732-740. https://doi.org/10.1016/j.cemconcomp.2007.07.001
  3. Ganjian, E., Khorami, M. and Maghsoudi, A.A. (2009), "Scrap-tire-rubber replacement forEshmaiel Ganjian, Morteza Khorami and Ali Akbar Maghsoudi (2009), "Scrap-tyre-rubber replacement for aggregate and filler in concrete", Constr. Build. Mater., 23(5), 1828-1836. https://doi.org/10.1016/j.conbuildmat.2008.09.020
  4. Ghaly, A.M. and Cahill, J.D. (2005), "Correlation of strength, rubber content and water: cement ration in rubberized concrete", Can. J. Civil Eng., 32(6), 1-7. https://doi.org/10.1139/l04-100
  5. Hernandez-Olivares, F. and Barluenga, G. (2004), "Fire performance of recycled rubber-filled high-strength concrete", Cement Concrete Res., 34(1), 109-117. https://doi.org/10.1016/S0008-8846(03)00253-9
  6. Hsiung, C., Cheng, R. and Yuen, Y. (2004), "Study on compressive strength test of waste rubber concrete", National Chinese Core J., 182, 40-42.
  7. Khaloo, Ali R., Dehestani, M. and Rahmatabadi, P. (2008), "Mechanical properties of concrete containing a high volume of tire-rubber particles", Waste Manage, 28(12), 2472-2482. https://doi.org/10.1016/j.wasman.2008.01.015
  8. Lin, K.L. (2006), "The effect of heating temperature of thin film Transistor-liquid crystal display (TFT-LCD) optical waste glass as a partial substitute partial for clay in eco-brick", J. Clean. Prod., 15(18), 1755-1759.
  9. Mouli, M. and Khelafi, H. (2008), "Performance characteristics of lightweight aggregate concrete containing natural pozzolan", Build. Environ., 43(1), 31-36. https://doi.org/10.1016/j.buildenv.2006.11.038
  10. Public Construction Commission (2001), "Instruction manual of fly ash/slag concrete in public construction", Public Construction Commission, Taipei.
  11. Su, N., Chang, R.C. and Chang, H.F. (2001), "Study of waste tire rubber powder applied in concrete", National Science Council Project No. NSC 89-2211-E-224-036.
  12. Wang, H.Y (2010), "Mix proportions and properties of CLSC made from thin film transition liquid crystal display optical waste glass", J. Environ. Manage, 91(3), 638-645. https://doi.org/10.1016/j.jenvman.2009.09.027
  13. Wang, H.Y. (2008), "Study on durability of densified high-performance lightweight aggregate concrete", Comput. Concrete, 4(6), 499-510.
  14. Wang, H.Y. (2009), "A study of the effects of LCD glass sand on the properties of concrete", Waste Manage, 29(1), 335-341. https://doi.org/10.1016/j.wasman.2008.03.005
  15. Wang, H.Y. and Chen, J.S. (2008), "Study of thin film transition liquid crystal display (TFT-LCD) optical waste glass applied in early-high-strength controlled low strength materials concrete", Comput. Concrete, 5(5), 491-501. https://doi.org/10.12989/cac.2008.5.5.491
  16. Wang, H.Y. and Chiang, L.T. (2006), "Study on microscopic property of interfacial region of high performance lightweight concrete mixed with pozzolanic material", Master's thesis.
  17. Wang, H.Y. and Huang, W.L. (2009), "A study on the properties of fresh self-consolidating glass concrete (SCGC)", J. Constr. Build. Mater., 24(4), 619-624.
  18. Wang, H.Y. and Huang, W.L. (2009), "Durability of self-consolidating concrete using waste LCD glass", J. Constr. Build. Mater., 24(6), 1008-1013.
  19. Wang, H.Y. and Tsai, K.C. (2006), "Engineering properties of lightweight aggregate concrete made from dredged silt", Cement Concrete Comp., 28(5), 481-485. https://doi.org/10.1016/j.cemconcomp.2005.12.005
  20. Wang, H.Y., Chen, C.S., Wang, S.Y., Chen, C.C. and Chen, F.L. (2007), Study on mixture ratio and properties of waste LCD glass applied in Controlled Low-Strength Material (CLSM) concrete, Taiwan Concrete Institute 2007 Concrete Engineering Symposium, No. I-5, 12, Taipei.
  21. Wang, H.Y., Lin, R.Y. and Shih, C.C. (2007), Influence of high temperature high pressure curing on compressive strength and elasticity modulus of lightweight aggregate concrete, the Third National Lightweight Aggregate Concrete Symposium, 67-82.
  22. Wang, P.K., Lin, J.Y., Yang, C.P. and Cheng, T.M. (2007), "Island Habitants-Taiwan environment survey report", Rhythms Monthly, Tzu Chi Culture and Communication Foundation, 114-117.
  23. Wang, H.Y. and Sheen, Y.N. and Hung, M.F. (2010), "Performance characteristics of dredged silt and highperformance lightweight aggregate concrete", Comput. Concrete, 7(1), 53-62. https://doi.org/10.12989/cac.2010.7.1.053

피인용 문헌

  1. Porosity of expanded clay manufactured with addition of sludge from the brewing industry vol.5, pp.4, 2014, https://doi.org/10.1007/s40095-014-0112-6
  2. Durability characteristics of recycled aggregate concrete vol.47, pp.5, 2013, https://doi.org/10.12989/sem.2013.47.5.701
  3. Experimental investigation on the use of recycled aggregates in producing concrete vol.47, pp.4, 2013, https://doi.org/10.12989/sem.2013.47.4.545
  4. Parametric Study for Replacement of Sand by Fly Ash for Better Packing and Internal Curing vol.05, pp.01, 2015, https://doi.org/10.4236/ojce.2015.51012
  5. Guided wave analysis of air-coupled impact-echo in concrete slab investigation on the use of waste tyre crumb rubber in concrete paving blocks vol.20, pp.3, 2012, https://doi.org/10.12989/cac.2017.20.3.311
  6. Case-based reasoning approach to estimating the strength of sustainable concrete vol.20, pp.6, 2017, https://doi.org/10.12989/cac.2017.20.6.645
  7. Use of e-plastic waste in concrete as a partial replacement of coarse mineral aggregate vol.21, pp.4, 2012, https://doi.org/10.12989/cac.2018.21.4.377
  8. Numerical analysis of hysteretic behavior for RAC structure under earthquake loading vol.18, pp.4, 2019, https://doi.org/10.1080/13467581.2019.1645671