Computers and Concrete

  • 제9권6호
  • /
  • Pages.469-486
  • /
  • 2012
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Neuro-Fuzzy modeling of torsional strength of RC beams

  • Cevik, A. (Department of Civil Engineering, University Of Gaziantep) ;
  • Arslan, M.H. (Department of Civil Engineering, Selcuk University) ;
  • Saracoglu, R. (Department of Electronic and Computer Education, Selcuk University)
  • 투고 : 2010.01.08
  • 심사 : 2011.11.14
  • 발행 : 2012.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents Neuro-Fuzzy (NF) based empirical modelling of torsional strength of RC beams for the first time in literature. The proposed model is based on fuzzy rules. The experimental database used for NF modelling is collected from the literature consisting of 76 RC beam tests. The input variables in the developed rule based on NF model are cross-sectional area of beams, dimensions of closed stirrups, spacing of stirrups, cross-sectional area of one-leg of closed stirrup, yield strength of stirrup and longitudinal reinforcement, steel ratio of stirrups, steel ratio of longitudinal reinforcement and concrete compressive strength. According to the selected variables, the formulated NFs were trained by using 60 of the 76 sample beams. Then, the method was tested with the other 16 sample beams. The accuracy rates were found to be about 96% for total set. The performance of accuracy of proposed NF model is furthermore compared with existing design codes by using the same database and found to be by far more accurate. The use of NF provided an alternative way for estimating the torsional strength of RC beams. The outcomes of this study are quite satisfactory which may serve NF approach to be widely used in further applications in the field of reinforced concrete structures.

키워드

참고문헌

  1. ACI Committee 318-2005 (2005), "Building code requirements for structural concrete (ACI 318-05) and commentary (318R-05)", American Concrete Institute, Farmington Hills, Mich.
  2. ACI Committee 318-71 (1971), "Building code requirements for structural concrete and commentary", American Concrete Institute, Detroit.
  3. ACI Committee 318-89 (1989), "Building code requirements for structural concrete and commentary", American Concrete Institute, Detroit.
  4. ACI Committee 318-95 (1995), "Building code requirements for structural concrete and commentary", American Concrete Institute, Detroit.
  5. Anderson, P. (1935), "Experiments with concrete in torsion", Trans. ASCE, 60, 641-652.
  6. AS3600 (2001), "Concrete structures, Standarts Association of Australia".
  7. Bai, Y.Y., Zhuang, H. and Wang, D. (2006), Advanced fuzzy logic technologies in industrial applications, Springer.
  8. BS8110 (1985), "Structural use of concrete-Part 2" British Standards
  9. Canadian Standard Association (1994), Design of concrete structures: Structure design. CSA Standard, A23-3- 94, Canadian Standard Association, Rexdale, Ontario.
  10. Ceylan, M., Arslan, M.H., Ceylan, R., Kaltakc, M.Y. and Ozbay, Y. (2010), "A new application area of ANN and ANFIS: determination of earthquake load reduction factor of prefabricated industrial buildings", Civ. Eng. Environ. Syst., 27(1), 53-69. https://doi.org/10.1080/10286600802506726
  11. Collins, C.D. Walsh, P.F. Archer, F.E. and Hall, A.S. (1965), "Reinforced concrete beams subjected to conbined torsion and shear", UNICIV Report, No.R-14, University of New South Wales.
  12. Collins, C.P. and Mitchell, D. (1980), "Shear and torsion design of prestressed and non-prestressed concrete beams", PCI J., 25(5), 32-100.
  13. Elfegren, L., Karlsson, I. and Losberg, A. (1974), "Torsion bending-shear interaction for concrete beams", J. Struct. Div. ASCE, 100, 1657-1676.
  14. European Standard. Eurocode 2 (2002), Design of concrete structures, prEN, 1992-1-1, Draft for stage 49, Commission of the European Communities, European Committee for Standardization.
  15. Evbuowman, N.F.O., Sivaloganathan, S. and Jebb, A. (1996), "A survey of design philosophies, models, methods and systems", P. I. Mech. Eng. B-J. Eng., 210(42), 301-320.
  16. Fang, I.K. and Shiau, J.K. (2004), "Torsional behavior of normal and high strength concrete beams", ACI Struct. J., 101(3), 304-313.
  17. Gallant, S.I. (1993), Neural network learning and expert systems, The MIT Press.
  18. Ghorbani, A. and Ghasemi, M.R. (2010), "An efficient method for reliability based optimization of structures using adaptive neuro-fuzzy systems", J. Mod. Simul. Syst., 1(1), 13-21.
  19. Haris, J. (2006), Fuzzy logic applications in engineering science, Springer.
  20. Hossain, T. and Mendis, P., Aravinthan, T. and Baker, G. (2006), "Torsional resistance of highstrength concrete beams", 19th Australasian Conference on the Mechanics of Structures and Materials, Christchurch, NZ.
  21. Hsu, T.T.C. (1968), Torsion of structural concrete-behavior of reinforced concrete rectangular members, Torsion of structural concrete SP-18, ACI, 261-306.
  22. Hsu, T.T.C. (1968), "Ultimate torque of reinforced concrete members", J. Struct. Div. ASCE, 94, 485-510.
  23. Hsu, T.T.C. and Mo, Y.L. (1985), "Softening of concrete in torsional members-design recommendation", ACI J., 82(4), 443-452.
  24. Jang, J.S.R., Sun, C.T. and Mizutani, E. (1997), Neuro-fuzzy and soft computing, A computational approach to learning and machine intelligence, Prentice Hall.
  25. Kasabov, K.N. (1996), Foundation of neural networks, fuzzy systems and knowledge engineering, MIT Press.
  26. Kim, H.S., Paul, N.R., Lin, P.Y. and Loh, C.H. (2006), "Neuro-fuzzy model of hybrid semi-active base isolation system with FPS bearings and an MR damper", Eng. Struct., 28(7), 947-958. https://doi.org/10.1016/j.engstruct.2005.09.029
  27. Koutchoukali, N.E. and Belarbi, G. (2001), "Torsion of high strength reinforced concrete beams and minimum reinforcement requirement", ACI Struct. J., 98(4), 462-469.
  28. Lessig, N.N. (1959), "Determination of carriying capacity of reinforced concrete elements with rectangular crosssection subjected to flexure with torsion", Zhelezonabetona, 5, 5-28.
  29. Mashrei, M.A., Abdulrazzaq, N., Turki, Y. Abdalla and M.S. Rahman (2010), "Neural networks model and adaptive neuro-fuzzy inference system for predicting the moment capacity of ferrocement members", Eng. Struct., 32(6), 1723-1734. https://doi.org/10.1016/j.engstruct.2010.02.024
  30. McMullen, A.E. and Rangan, B.V. (1978), "Pure torsion in rectangular section-A reexamination", ACI J., 75, 511-519.
  31. Murawski, K., Arciszewski, T. and De Jong, K. (2000), "Evolutionary computation in structural design", Eng. Comput., 16(3-4), 275-286. https://doi.org/10.1007/PL00013716
  32. Nawy, E.G. (2003), Reinforced concrete, A fundamental approach, Pearson Education.
  33. Rajasekaran, S., Suresh, D. and Vijayalakshmi Pai, G.A. (2002), "Application of sequential learning neural networks to civil engineering modeling problems", Eng. Comput., 18(2), 138-147. https://doi.org/10.1007/s003660200012
  34. Rao, S.S., Nahm, A., Shi, Z., Deng, X. and Syamil, A. (1999), "Artificial intelligence and expert systems applications in new product development: A survey", J. Int. Manuf., 10(3-4), 231-244. https://doi.org/10.1023/A:1008943723141
  35. Rasmussen, L.J. and Baker, G. (1994), "Assessment of torsional strength in reinforced normal and high-strength concrete beams", Austral. Civil Eng. Trans., IEAust., 36(2), 165-171.
  36. Rasmussen, L.J. and Baker, G. (1995), "Torsion in reinforced normal and high strength concrete beams Part-I : An experimental test series", ACI Struct. J., 92(1), 56-62.
  37. Rausch, E. (1929), "Design of reinforced concrete in torsion", Technische Hochschule, Berlin, 53. (in German).
  38. Regli, W.C., Hu, X., Atwood, M. and Sun, W. (2000), "A Survey of design rationale systems: Approaches, representation, capture and retrieval", Eng. Comput., 16(3-4), 209-235. https://doi.org/10.1007/PL00013715
  39. Rutkowski, L. (2004), Flexible neuro-fuzzy systems: Structures, learning and performance evaluation, Kluwer Academic Publishers.
  40. Saridakisa, K.M., Dentsorasa, A.J., Radelb, P.E., Saridakisb, V.G. and Exintarib, N.V. (2006), "Neuro-fuzzy casebased design: An application in structural design", Intell. Prod. Mach. Syst., 2nd IProms Virtual Conferences, 407-412.
  41. Simpson, T.W., Peplinski, J.D., Koch, P.N. and Allen, J.K. (2001), "Metamodels for computer-based engineering design: survey and recommendations", Eng. Comput., 17(2), 129-150. https://doi.org/10.1007/PL00007198
  42. Sivanandam, S.N., Sumathi, S. and Deepa, S.N. (2007), Introduction to fuzzy logic using MATLAB, Springer.
  43. Tang, C.W. (2006), "Using radial basis function neural networks to model torsional strength of reinforced concrete beams", Comput. Concrete, 3(5), 335-355. https://doi.org/10.12989/cac.2006.3.5.335
  44. TBC-500-2000 (2000), Requirements for design and construction of reinforced concrete structures, Turkish Standards TS-500, Ankara.
  45. Victor, D.J. and Muthukrishnan, R. (1973), "Effect of stirrups on ultimate torque of reinforced concrete beams", ACI J., 70(4), 300-306.
  46. Wang, Y.M. and Elhag, T.H.M. (2008), "An adaptive neuro-fuzzy inference system for bridge risk assessment", Expert Syst. Appl., 34(4), 3099-3106. https://doi.org/10.1016/j.eswa.2007.06.026
  47. Zadeh, L.A. (1965), "Fuzzy sets", Inform. Control., 8(3), 338-353. https://doi.org/10.1016/S0019-9958(65)90241-X
  48. Zang, Y. (2002), "Torsion in high strength concrete rectangular beams", Master thesis, University of Nevada.
  49. Zia, P. and Hsu, T.T.C. (2004), "Design for torsion and shear in prestressed concrete", PCI J. Prescast/Prest. Concrete Inst., 49(3), 34-42.

Cited by

  1. An experimental and numerical investigation on the effect of longitudinal reinforcements in torsional resistance of RC beams vol.47, pp.2, 2013, https://doi.org/10.12989/sem.2013.47.2.247
  2. Support vector machines in structural engineering: a review vol.21, pp.3, 2015, https://doi.org/10.3846/13923730.2015.1005021
  3. Experimental study on ultimate torsional strength of PC composite box-girder with corrugated steel webs under pure torsion vol.46, pp.4, 2013, https://doi.org/10.12989/sem.2013.46.4.519
  4. Parametric analysis and torsion design charts for axially restrained RC beams vol.55, pp.1, 2015, https://doi.org/10.12989/sem.2015.55.1.001
  5. Ultimate torsional behaviour of axially restrained RC beams vol.16, pp.1, 2015, https://doi.org/10.12989/cac.2015.16.1.067
  6. Bending strength diagnosis for corroded reinforced concrete beams with attendance of deterministic, random and fuzzy parameters vol.5, pp.3, 2020, https://doi.org/10.1080/24705314.2020.1765268