Computers and Concrete

  • 제9권4호
  • /
  • Pages.245-255
  • /
  • 2012
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Simulation of the damping effect of a high-rise CRST frame structure

  • Lu, Xilin (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University) ;
  • Zhang, Hongmei (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University) ;
  • Meng, Chunguang (Architecture Design & Research Institute of Tongji University)
  • 투고 : 2010.04.30
  • 심사 : 2011.06.22
  • 발행 : 2012.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

The damping effect of a Concrete-filled Rectangular Steel Tube (CRST) frame structure is studied in this paper. Viscous dampers are employed to insure the function of the building especially subjected to earthquakes, for some of the main vertical elements of the building are not continuous. The shaking table test of a 1:15 scale model was conducted under different earthquake excitations to recognize the seismic behavior of this building. And the vibration damping effect was also investigated by the shaking table test and the simulation analysis. The nonlinear time-history analysis of the shaking table test model was carried out by the finite element analysis program CANNY. The simulation model was constructed in accordance with the tested one and was analyzed under the same loading condition and the simulation effect was then validated by the tested results. Further more, the simulation analysis of the prototype structure was carried out by the same procedure. Both the simulated and tested results indicate that there are no obvious weak stories on the damping equipped structure, and the dampers can provide the probability of an irregular CRST frame structure to meet the requirements of the design code on energy dissipation and deformation limitation.

키워드

참고문헌

  1. De Pasquale, G., Veijola, T. and Soma, A. (2010), "Modeling and validation of air damping in perforated gold and silicon MEMS plates", J. Micromech. Microeng., 20(1), 1-12.
  2. Ghosh, R. and Spanos, P.D. (2009), "Determination of offshore spar stochastic structural response accounting for nonlinear stiffness and radiation damping effects", J. Mech. Mater. Struct., 4(7-8), 1327-1340. https://doi.org/10.2140/jomms.2009.4.1327
  3. Hu, H.T., Su, F.C. and Elchalakani, M. (2010), "Finite element analysis of CFT columns subjected to pure bending moment", Steel Compos. Struct., 10(5), 415-428. https://doi.org/10.12989/scs.2010.10.5.415
  4. Jiang, H.J., Lu, X.L. and Kubo, T. (2009), "Maximum displacement profiles of reinforced concrete frames", J. Asian Arch. Build. Eng., 8(2), 183-190. https://doi.org/10.3130/jaabe.8.183
  5. Kato, D., Miyajima, Y. and Nakamura, Y. (2009), "Evaluating method of deformation at losing point of axial load carrying capacity of RC columns", J. Asian Arch. Build. Eng., 8(2), 501-508. https://doi.org/10.3130/jaabe.8.501
  6. Kavianipour, O. and Sadati, S.H. (2009), "Effects of damping on the linear stability of a free-free beam subjected to follower and transversal forces", Struct. Eng. Mech., 33(6), 709-724. https://doi.org/10.12989/sem.2009.33.6.709
  7. Kounadis, A. (2009), "The Effect of infinitesimal damping on neoconservative divergence instability systems", J. Mech. Mater. Struct., 4(7-8), 1415-1428. https://doi.org/10.2140/jomms.2009.4.1415
  8. Li, K.N., Kubo, T., Ventura, C. and Yang, S.T. (2000), "3D Analysis of building model and reliability of simulated structural earthquake responses", Build. Struct., 30, 14-18.
  9. Ministry of Construction of the People's Republic of China. (2001), Code for seismic design of buildings (GB 50011-2001) (English Version), China.
  10. Park, J.W. and Kim, S.E. (2008), "Nonlinear inelastic analysis of steel-concrete composite beam-columns using the stability functions", Struct. Eng. Mech., 30(6), 763-785. https://doi.org/10.12989/sem.2008.30.6.763
  11. Sabri, F., Lakis, A.A. and Toorani, M.H. (2009), "Hybrid finite element method in supersonic flutter analysis of circular cylindrical shells", 31st International Conference on Boundary Elements and other Mesh Reduction Methods, New Forest England.
  12. Starossek, U., Falah, N. and Lohning, T. (2010), "Numerical analyses of the force transfer in concrete-filled steel tube columns", Struct. Eng. Mech., 35(2), 241-256. https://doi.org/10.12989/sem.2010.35.2.241