DOI QR코드

DOI QR Code

Prediction of deflection of high strength steel fiber reinforced concrete beams and columns

  • 투고 : 2010.10.26
  • 심사 : 2011.05.11
  • 발행 : 2012.02.28

초록

This paper presents an analytical procedure for the analysis of high strength steel fiber reinforced concrete members considering the cracking effect in the serviceability loading range. Modifications to a previously proposed formula for the effective moment of inertia are presented. Shear deformation effect is also taken into account in the analysis, and the variation of shear stiffness in the cracked regions of members has been considered by reduced shear stiffness model. The effect of steel fibers on the behavior of reinforced concrete members have been investigated by the developed computer program based on the aforementioned procedure. The inclusion of steel fibers into high strength concrete beams and columns enhances the effective moment of inertia and consequently reduces the deflection reinforced concrete members. The contribution of the shear deformation to the total vertical deflection of the beams is found to be lower for beams with fibers than that of beams with no fibers. Verification of the proposed procedure has been confirmed from series of reinforced concrete beam and column tests available in the literature. The analytical procedure can provide an accurate and efficient prediction of deflections of high strength steel fiber reinforced concrete members due to cracking under service loads. This procedure also forms the basis for the three dimensional analysis of frames with steel fiber reinforced concrete members.

키워드

참고문헌

  1. Abdul Razzak, A.A. (1996), "Nonlinear finite element analysis of fibrous reinforced concrete structural members", Ph. D. Thesis, University of Mosul, IRAQ.
  2. American Concrete Institute (ACI) Committee 435 (1966), "Deflection of reinforced concrete flexural members", ACI J., 63, 637-674.
  3. American Concrete Institute (ACI) Committee 363 (1984), "State of art report on high strength concrete", ACI J., 81(4), 364-411.
  4. Al Hasan, B.J. (2003), "Nonlinear finite element analysis of partially prestressed fibrous concrete beams", M.Sc. Thesis, Mosul University, IRAQ, 127pp.
  5. Al Mahaidi, R.S.H. (1978), "Nonlinear finite element analysis of reinforced concrete deep members", Department Struct. Eng. Cornell University, Report No: 79-1, 357.
  6. Al Zaid, R.Z., Al Shaikh, A.H. and Abu Hussain, M.M. (1991), "Effect of loading type on the effective moment of inertia of reinforced concrete beams, ACI Struct. J., 88(2), 184-90.
  7. Ashour, A.S., Hasanaian, G.S. and Wafa, F.F. (1984), "Shear behavior of high strength fiber reinforced concrete beams", ACI J., 81(4), 364-411.
  8. Ashour, A.S., Wafa, F.F. and Kamal, M.I. (2000), "Effect of the concrete compressive strength and tensile reinforcement ratio on the flexural behavior of fibrous concrete beams", Eng. Struct., 22(9), 1145-1158. https://doi.org/10.1016/S0141-0296(99)00052-8
  9. Brandt, A.M. (2008), "Fibre reinforced cement-based (FRC) composites after over 40 years of development in building and civil engineering", Compos. Struct., 86(1-3), 3-9. https://doi.org/10.1016/j.compstruct.2008.03.006
  10. Branson, D.E. (1963), "Instantaneous and time-dependent deflections of simple and continuous reinforced concrete beams", HPR, Alabama Highway Department/US Bureau of Public Roads, Report No. 7(1), 78.
  11. Chaekuk, N. and Hyo Gyoung, K. (2011), "A numerical tension-stiffening model for ultra high strength fiberreinforced concrete beams", Comput. Concrete, 8(1), 1-22. https://doi.org/10.12989/cac.2011.8.1.001
  12. Choi, K.K., Park, H.G. and Wight, J.K. (2007), "Shear strength of steel fiber reinforced concrete beams without web reinforcement", ACI Struct. J., 104(1):12-21.
  13. Chunxiang, Q. and Patnaikuni, I. (1999), "Properties of high-strength steel fiber reinforced concrete beams in bending", Cement Concrete Comp., 21(1), 73-81.
  14. Corley, W.G. and Sozen, M.A. (1966), "Time-dependent deflections of reinforced concrete beams", ACI J. Proc., 63(3), 373-86.
  15. Cosenza, E. (1990), "Finite element analysis of reinforced concrete elements in a cracked state", Compos. Struct., 36(1), 71-79. https://doi.org/10.1016/0045-7949(90)90176-3
  16. Craig, R.J. and Decker, J. (1987), "Inelastic behaviour of reinforced fibrous concrete", J. Struct. Eng-ASCE, 113(4), 802-817. https://doi.org/10.1061/(ASCE)0733-9445(1987)113:4(802)
  17. Dundar, C. and Kara, I.F. (2007), "Three dimensional analysis of reinforced concrete frames with cracked beam and column elements", Eng. Struct., 29(9), 2262-2273. https://doi.org/10.1016/j.engstruct.2006.11.018
  18. Ezeldin, A.S. and Balaguru, P.N. (1992), "Normal and high-strength fiber reinforced concrete under compression", J. Mater. Civil. Eng., 4(4), 415-429. https://doi.org/10.1061/(ASCE)0899-1561(1992)4:4(415)
  19. Ganesan, N. and Ramana, Murthy J.V. (1990), "Strength and behavior of confined steel fiber reinforced concrete columns", ACI Mater. J., 87(3), 221-227.
  20. Hsu, L.S. and Hsu, T. (1994), "Stress strain behavior of steel-fiber high-strength concrete under compression", ACI Struct. J., 91(4), 448-457.
  21. Kara, I.F. and Dundar, C. (2009), "Effect of loading types and reinforcement ratio on an effective moment of inertia and deflection of a reinforced concrete beam", Adv. Eng. Softw., 40(9), 836-846. https://doi.org/10.1016/j.advengsoft.2009.01.009
  22. Lim, D.H. and Nawy, E.G. (2005), "Behaviour of plain and steelfibre-reinforced high-strength concrete under uniaxial and biaxial compression", Mag. Concrete Res. 57(10), 603-610. https://doi.org/10.1680/macr.2005.57.10.603
  23. Lima Junior, H.C. and Giongo, J.S. (2004), "Steel-fibre high strength concrete prisms confined by rectangular ties under concentric compression", Mater. Struct., 37(10), 689-697. https://doi.org/10.1007/BF02480514
  24. Maalej, M. and Lok, T.S. (1999), "Flexural behavior of steel fiber reinforced concrete", J. Mater. Civil Eng., 11(2), 179-180. https://doi.org/10.1061/(ASCE)0899-1561(1999)11:2(179)
  25. Naaman, A.E. (2002), "Toughness, ductility, surface energy and deflection-hardening FRC composites", Proceedings of the JCI International Workshop on Ductile Fiber Reinforced Cementitious Composites (DRFCC)-Application and Evaluation (DFRCC-2002), Japan Concrete Institute, Oct. 2002, 33-57.
  26. Naaman, A.E. and Reinhardt, H.W. (2003), "Hige performance fiber reinforced cement compsites: HPFRCC 4", RILEM Proceedings Pro 30, RILEM Publications S.A.R.L., 95-113.
  27. Papakonstantinou, C. G. and Katakalos, K. (2009), ''Flexural behavior of reinforced concrete beams strengthened with a hybrid inorganic matrix-steel fiber retrofit system'', Struct. Eng. Mech., 31(5), 567-585. https://doi.org/10.12989/sem.2009.31.5.567
  28. Ramadoss, P. and Nagamani, K. (2009), "Behavior of high-strength fiber reinforced concrete plates under inplane and transverse loads", Struct. Eng. Mech., 31(4), 371-382. https://doi.org/10.12989/sem.2009.31.4.371
  29. Sakai, K. and Kakuta, Y. (1980), "Moment-curvature relationship of reinforced concrete members subjected to combined bending and axial force", ACI J., 77, 189-194.
  30. Standarts Association of Australia (SAA) (1994), SAA concrete structures code, AS 3600-1994, Sydney, Australia.
  31. Swamy, R.N. and Bahia, H.M. (1985), "Effectiveness of steel fibers as shear reinforcement", Concrete Int., 7(3), 35-40.
  32. Swamy, R.N. (1987), "High-strength concrete-material properties and structural behaviors", ACI SP-87, Detroit: American Concrete Institute, 110-146.
  33. Tasdemir, C., Tasdemir, M.A., Lydon, F.D. and Barr, B.I.G. (1996), "Effects of silica fume and aggregate size of the brittleness of concrete", Cement Concrete Res., 26(1), 63-68. https://doi.org/10.1016/0008-8846(95)00180-8
  34. Thomas, J. and Ramaswamy, A. (2007), "Mechanical properties of steel fiber-reinforced concrete", J. Mater. Civil Eng., 19(5), 385-392. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:5(385)
  35. Tokgoz, S. (2009), "Effects of steel fiber addition on the behaviour of biaxially loaded high strength concrete columns", Mater. Struct., 42(8), 1125-1138. https://doi.org/10.1617/s11527-008-9448-9

피인용 문헌

  1. A study on load-deflection behavior of two-span continuous concrete beams reinforced with GFRP and steel bars vol.63, pp.5, 2012, https://doi.org/10.12989/sem.2017.63.5.629
  2. Flexural analysis of steel fibre-reinforced concrete members vol.22, pp.1, 2012, https://doi.org/10.12989/cac.2018.22.1.011
  3. Compressive and flexural behaviors of ultra-high strength concrete encased steel members vol.33, pp.6, 2012, https://doi.org/10.12989/scs.2019.33.6.849