Computers and Concrete

  • 제9권2호
  • /
  • Pages.99-118
  • /
  • 2012
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A decision support system for diagnosis of distress cause and repair in marine concrete structures

  • Champiri, Masoud Dehghani (Faculty of Marine Technology, Amirkabir University of Technology) ;
  • Mousavizadegan, S.Hossein (Faculty of Marine Technology, Amirkabir University of Technology) ;
  • Moodi, Faramarz (Concrete Technology and Durability Research Center, Amirkabir University of Technology)
  • 투고 : 2010.09.11
  • 심사 : 2011.04.06
  • 발행 : 2012.02.28
⟨ 이전 논문 다음 논문 ⟩

초록

Marine Structures are very costly and need a continuous inspection and maintenance routine. The most effective way to control the structural health is the application of an expert system that can evaluate the importance of any distress on the structure and provide a maintenance program. An extensive literature review, interviews with expert supervisors and a national survey are used to build a decision support system for concrete structures in sea environment. Decision trees are the main rules in this system. The system input is inspection information and the system output is the main cause(s) of distress(es) and the best repair method(s). Economic condition, severity of distress, distress situation, and new technologies and the most repeated classical methods are considered to choose the best repair method. A case study demonstrates the application of the developed decision support system for a type of marine structure.

키워드

참고문헌

  1. ACI (American Concrete Institute) (2007), Causes, Evaluation, and Repair of Cracks in Concrete Structures, ACI committee 224, ACI 224-1R-07, USA.
  2. BSI (British Standard Institution) (2008), BS 1810 and BS 5328, UK.
  3. Chassiakos, A.P., Vagiotas, P. and Theodorakopoulos, D.D. (2005), "A knowledge-based system for maintenance planning of highway concrete bridges", Adv. Eng. Softw., Elsevier, 36(11-12), 740-749. https://doi.org/10.1016/j.advengsoft.2005.03.020
  4. Dehghani Champiri, M., Mousavizadegan, S.H. and Moodi, F. (2010), A system for diagnosing, evaluating, and repairing of marine concrete structures, Iran patent, Number 64840, Tehran, Iran, 2010.
  5. Ismail, N., Ismail, A. and Rahmat, R.A. (2009), "Development of expert system for airport pavement maintenance and rehabilitation", Euro. J. Sci. Res., ISSN 1450-216X, 35(1), 121-129.
  6. Kim, Y.M., Kim, C.K. and Hong, S.G. (2007), "Fuzzy set based crack diagnosis system for reinforced concrete structures", Comput. Struct., Elsevier, 85(23-24), 1828-1844. https://doi.org/10.1016/j.compstruc.2007.04.001
  7. Kim, Y.M., Kim, C.K. and Hong, S.G. (2006), "Fuzzy based state assessment for reinforced concrete building structures", Eng. Struct., Elsevier, 28(9), 1286-1297. https://doi.org/10.1016/j.engstruct.2005.12.011
  8. Luger, G. and Stubblefield, W. (2004), Artificial Intelligence: Structures and Strategies for Complex Problem Solving (5th ed.), The Benjamin/Cummings Publishing Company, Inc., ISBN 0-8053-4780-1, pp. 227-331.
  9. McCorduck, P. (2004), Machines Who Think (2nd ed.), Natick, MA: A.K. Peters, Ltd., ISBN 1-56881-205-1, pp. 327-335, 434-435.
  10. Moodi, F. (2010), "Investigation of a management framework for condition assessment of concrete structures based on reusable knowledge and inspection", Int. J. Comput. Concrete, 7(3), 249-269. https://doi.org/10.12989/cac.2010.7.3.249
  11. Moodi, F. (2004), "Integration of knowledge management and information technology into the repair of concrete structures: an innovative approach", Int. J. Inf. Tech. Arch. Eng. Constr. (IT-AEC), 3(2), CICE, UK.
  12. PCA (Portland Cement Association) (2001), Concrete Slab Surface Defects: Causes, Prevention, Repair, Item Code: IS177.
  13. Ramezanianpour, A.A., Shahhosseini, V. and Moodi, F. (2009), "A fuzzy expert system for diagnosis assessment of reinforced concrete bridge decks", Int. J. Comput. Concrete, 281-303.
  14. Ramezanianpour, A.A. (2006), Concrete in the marine environment, Amirkabilr University of Technology publishing company, Iran, Tehran, (In Persian).
  15. Russell, S.J. and Norvig, P. (2003), Artificial Intelligence: A Modern Approach (2nd ed.), Upper Saddle River, New Jersey: Prentice Hall, ISBN 0-13-790395-2, pp. 2224.
  16. Sandvik, K., Eie, R. and Advocaat, J.D. (2004), "A new challenge", XIV National Conference on Structural Engineering, Acapulco Offshore Structures, Norway.
  17. Tarighat, A. and Miyamoto, A. (2009), "Fuzzy concrete bridge deck condition rating method for practical bridge management system", Expert Syst. Appl., Elsevier, 36(10), 12077-12085. https://doi.org/10.1016/j.eswa.2009.04.043
  18. USACE (1996), REMR Management Systems for Civil Works Structures, USA: U.S Army Corps of Engineers, REMR Technical Note OM-MS-1.1.
  19. USACE (U.S Army Corps of Engineers) (1995), Engineering and Design: Evaluation and Repair Concrete Structures, Engineer Manual 1110-2-2002, Washington D.C, USA.
  20. Yehia, S., Abudayyeh, O., Fazal, I. and Randolph, D. (2008), "A decision support system for concrete bridge deck maintenance", Adv. Eng. Softw., Elsevier, pp. 202-210.

피인용 문헌

  1. Fuzzy Based Decision Support System for Condition Assessment and Rating of Bridges vol.97, pp.3, 2016, https://doi.org/10.1007/s40030-016-0160-4
  2. Uniaxial Tensile Stress-Strain Relationships of RC Elements Strengthened with FRP Sheets vol.20, pp.3, 2016, https://doi.org/10.1061/(ASCE)CC.1943-5614.0000639
  3. Reliability-Based Multiobjective Design Optimization of Reinforced Concrete Bridges Considering Corrosion Effect vol.3, pp.3, 2017, https://doi.org/10.1061/AJRUA6.0000896
  4. Cracking behavior and crack width predictions of FRP strengthened RC members under tension vol.125, 2016, https://doi.org/10.1016/j.engstruct.2016.06.042
  5. Genetic programming for experimental big data mining: A case study on concrete creep formulation vol.70, 2016, https://doi.org/10.1016/j.autcon.2016.06.010
  6. Repairable k-out-n system work model analysis from time response vol.12, pp.6, 2013, https://doi.org/10.12989/cac.2013.12.6.775
  7. Load-Deflection Behavior Prediction of Intact and Corroded RC Bridge Beams with or without Lap Splices Considering Bond Stress-Slip Effect vol.22, pp.1, 2017, https://doi.org/10.1061/(ASCE)BE.1943-5592.0000981
  8. A Fuzzy Classification System for Evaluating the Health Condition of Marine Concrete Structures vol.10, pp.3, 2012, https://doi.org/10.3151/jact.10.95
  9. A kinematic measurement for ductile and brittle failure of materials using digital image correlation vol.3, pp.4, 2016, https://doi.org/10.3934/matersci.2016.4.1759
  10. Lattice Approach in Continuum and Fracture Mechanics vol.83, pp.7, 2016, https://doi.org/10.1115/1.4033306
  11. On Energy Release Rates and Configurational Forces for Interfacial Propagating Cracks: A Lattice Approach With a Brittle Erosion Technique vol.84, pp.2, 2016, https://doi.org/10.1115/1.4035181
  12. Technique and outfit of large-scale intelligent PC external wall panel mixing production line vol.399, pp.1757-899X, 2018, https://doi.org/10.1088/1757-899X/399/1/012062
  13. Effect of Alkali-Silica Reactivity Damage to Tip-Over Impact Performance of Dry Cask Storage Structures vol.12, pp.1, 2018, https://doi.org/10.1186/s40069-018-0248-5
  14. Probabilistic prediction model for RC bond failure mode vol.233, pp.None, 2021, https://doi.org/10.1016/j.engstruct.2021.111944