Smart Structures and Systems

  • 제9권6호
  • /
  • Pages.489-504
  • /
  • 2012
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Smart PZT-interface for wireless impedance-based prestress-loss monitoring in tendon-anchorage connection

  • Nguyen, Khac-Duy (Department of Ocean Engineering, Pukyong National University) ;
  • Kim, Jeong-Tae (Department of Ocean Engineering, Pukyong National University)
  • 투고 : 2011.11.08
  • 심사 : 2012.05.17
  • 발행 : 2012.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

For the safety of prestressed structures such as cable-stayed bridges and prestressed concrete bridges, it is very important to ensure the prestress force of cable or tendon. The loss of prestress force could significantly reduce load carrying capacity of the structure and even result in structural collapse. The objective of this study is to present a smart PZT-interface for wireless impedance-based prestress-loss monitoring in tendon-anchorage connection. Firstly, a smart PZT-interface is newly designed for sensitively monitoring of electro-mechanical impedance changes in tendon-anchorage subsystem. To analyze the effect of prestress force, an analytical model of tendon-anchorage is described regarding to the relationship between prestress force and structural parameters of the anchorage contact region. Based on the analytical model, an impedance-based method for monitoring of prestress-loss is conducted using the impedance-sensitive PZT-interface. Secondly, wireless impedance sensor node working on Imote2 platforms, which is interacted with the smart PZT-interface, is outlined. Finally, experiment on a lab-scale tendon-anchorage of a prestressed concrete girder is conducted to evaluate the performance of the smart PZT-interface along with the wireless impedance sensor node on prestress-loss detection. Frequency shift and cross correlation deviation of impedance signature are utilized to estimate impedance variation due to prestress-loss.

키워드

과제정보

연구 과제 주관 기관 : Korean Institute of Energy Technology Evaluation and Planning (KETEP)

참고문헌

  1. Bhalla, S. and Soh, C.K. (2003), "Structural impedance based damage diagnosis by piezo-transducers", Earthq. Eng. Struct. D., 32(12), 1897-1916. https://doi.org/10.1002/eqe.307
  2. Red Hat (2012), Available from .
  3. Fasel, T.R., Sohn, H., Park, G. and Farrar, C.R. (2005), "Active sensing using impedance-based arx models and extreme value statistics for damage detection", Earthq. Eng. Struc. D., 34(7), 763-785. https://doi.org/10.1002/eqe.454
  4. Illinois Structural Health Monitoring Project (2010), Available from http://shm.cs.uiuc.edu.
  5. Johnson, K.L. (1985), Contact mechanics, Cambridge University Press, Cambridge.
  6. Kim, B.H. and Park, T. (2007), "Estimation of cable tension force using the frequency-based system identification method", J. Sound Vib., 304(3-5), 660-676. https://doi.org/10.1016/j.jsv.2007.03.012
  7. Kim, J.T., Park, J.H., Hong, D.S., Cho, H.M., Na, W.B. and Yi, J.H. (2009), "Vibration and impedance monitoring for prestress-loss prediction in PSC girder bridges", Smart Struct.Syst., 5(1), 81-94. https://doi.org/10.12989/sss.2009.5.1.081
  8. Kim, J.T., Park, J.H., Hong, D.S. and Park, W.S. (2010), "Hybrid health monitoring of prestressed concrete girder bridges by sequential vibration-impedance approaches", Eng. Struct., 32(1), 115-128. https://doi.org/10.1016/j.engstruct.2009.08.021
  9. Kim, J.T., Na, W.B., Park, J.H. and Hong, D.S. (2006), "Hybrid health monitoring of structural joints using modal parameters and EMI signatures", Proceeding of the SPIE, San Diego, USA.
  10. Krishnamurthy, V., Fowler, K. and Sazonov, E. (2008), "The effect of time synchronization of wireless sensors on the modal analysis of structures", Smart Mater. Struct., 17(5), 1-13.
  11. Kurata, N., Spencer, B.F. and Ruiz-Sandoval, M. (2005), "Risk monitoring of buildings with wireless sensor networks", Struct. Health Monit., 12(3-4), 315-327. https://doi.org/10.1002/stc.73
  12. Li, H., Ou, J.P. and Zhou, Z. (2009), "Applications of optical fiber Bragg gratings sensing technology-based smart stay cables", Opt. Laser. Eng., 47(10), 1077-1084. https://doi.org/10.1016/j.optlaseng.2009.04.016
  13. Liang, C., Sun, F.P. and Rogers, C.A. (1994), "Coupled electro-mechanical analysis of adaptive material - Determination of the actuator power consumption and system energy transfer", J. Intell. Mat. Syst.Str., 5(1), 12-20. https://doi.org/10.1177/1045389X9400500102
  14. Lynch, J.P. and Loh, K. (2006), "A summary review of wireless sensors and sensor networks for structural health monitoring", Shock Vib., 38(2), 91-128. https://doi.org/10.1177/0583102406061499
  15. Mascarenas, D.L. (2006), Development of an impedance-based wireless sensor node for monitoring of bolted joint preload, MS Thesis, Department of Structural Engineering, University of California, San Diego, USA.
  16. Mascarenas, D.L., Todd, M.D., Park, G. and Farrar, C.R. (2007), "Development of an impedance-based wireless sensor node for structural health monitoring", Smart Mater. Struct., 16(6), 2137-2145. https://doi.org/10.1088/0964-1726/16/6/016
  17. Nagayama, T., Sim, S.H., Miyamori, Y. and Spencer, B.F. (2007), "Issues in structural health monitoring employing smart sensors", Smart Struct. Syst., 3(3), 299-320. https://doi.org/10.12989/sss.2007.3.3.299
  18. Ni, Y.Q., Li, B., Lam, K.H., Zhu, D.P., Wang, Y., Lynch, J.P. and Law, K.H. (2011), "In-construction vibration monitoring of a super-tall structure using a long-range wireless sensing system", Smart Struct. Syst., 7(2), 83-102. https://doi.org/10.12989/sss.2011.7.2.083
  19. Park, G.., Sohn, H., Farrar, C. and Inman, D. (2003), "Overview of piezoelectric impedance-based health monitoring and path forward", Shock Vib., 35(6), 451-463. https://doi.org/10.1177/05831024030356001
  20. Park, J.H., Kim, J.T., Hong, D.S., Mascarenas, D. and Lynch, J.P. (2010), "Autonomous smart sensor nodes for global and local damage detection of prestressed concrete bridges based on accelerations and impedance measurements", Smart Struct. Syst., 6(5), 711-730. https://doi.org/10.12989/sss.2010.6.5_6.711
  21. Park, G., Cudney, H.H. and Inman, D.J. (2001), "Feasibility of using impedance-based damage assessment for pipeline structures", Earthq. Eng. Struct. D., 30(10), 1463-1474. https://doi.org/10.1002/eqe.72
  22. Ritdumrongkul, S., Abe, M., Fujino, Y. and Miyashita, T. (2004), "Quantitative health monitoring of bolted joints using a piezoceramic actuator-sensor", Smart Mater. Struct., 13(1), 20-29. https://doi.org/10.1088/0964-1726/13/1/003
  23. Sohn, H., Farrar, C.R., Hemez, F.M., Shunk, D.D., Stinemates, D.W. and Nadler, B.R. (2003), A review of structural health monitoring literature: 1996-2001, Los Alamos National Laboratory Report, LA-13976-MS, Los Alamos, NM.
  24. Spencer, B.F., Ruiz-Sandoval, M.E. and Kurata, N. (2004), "Smart sensing technology: opportunities and challenges", Struct. Health Monit., 11(4), 349-368. https://doi.org/10.1002/stc.48
  25. Straser, E.G. and Kiremidjian, A.S. (1998), A modular, wireless damage monitoring system for structure, Technical Report 128, John A. Blume Earthquake Engineering Center, Stanford University, Stanford, CA.
  26. Sun, F.P., Chaudhry Z., Liang, C. and Rogers C.A. (1995), "Truss structure integrity identification using PZT sensor-actuator", J. Intell. Mat. Syst. Str., 6(1), 134-139. https://doi.org/10.1177/1045389X9500600117
  27. Taylor, S.G., Farinholt, K.M., Park, G., Todd M.D. and Farrar, C.R. (2010), "Multi-scale wireless sensor node for health monitoring of civil infrastructure and mechanical systems", Smart Struct. Syst., 6(5-6), 661-673. https://doi.org/10.12989/sss.2010.6.5_6.661
  28. Yang, Y., Hu, Y. and Lu, Y. (2008), "Sensitivity of PZT impedance sensors for damage detection of concrete structures", Sensors, 8(1), 327-346. https://doi.org/10.3390/s8010327
  29. Yun, C.B and Min, J. (2010), "Smart sensing, monitoring, and damage detection for civil infrastructures", KSCE J. Civil Eng., 15(1), 1-14. https://doi.org/10.1007/s12205-011-0001-y
  30. Zagrai, A.N. and Giurgiutiu, V. (2001), "Electro-mechanical impedance method for crack detection in thin plates", J. Intell. Mater. Syst. Str., 12, 709-718. https://doi.org/10.1177/104538901320560355
  31. Zui, H, Shinke, T. and Namita, Y. (1996), Practical formulas for estimation of cable tension by vibration method, J. Struct. Eng. - ASCE, 122, 651-656. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:6(651)

피인용 문헌

  1. Full-scale experimental investigation of wire breakage detection in deviated multi-strand tendon systems vol.6, pp.2, 2016, https://doi.org/10.1007/s13349-016-0158-7
  2. Applications of smart piezoelectric materials in a wireless admittance monitoring system (WiAMS) to Structures—Tests in RC elements vol.5, 2016, https://doi.org/10.1016/j.cscm.2016.03.003
  3. Quantification of temperature effect on impedance monitoring via PZT interface for prestressed tendon anchorage vol.26, pp.12, 2017, https://doi.org/10.1088/1361-665X/aa931b
  4. A strain-based wire breakage identification algorithm for unbonded PT tendons vol.16, pp.3, 2015, https://doi.org/10.12989/sss.2015.16.3.415
  5. An electromechanical impedance-based method for tensile force estimation and damage diagnosis of post-tensioning systems vol.17, pp.1, 2016, https://doi.org/10.12989/sss.2016.17.1.107
  6. Recent R&D activities on structural health monitoring in Korea vol.3, pp.1, 2016, https://doi.org/10.12989/smm.2016.3.1.091
  7. Impedance-Based Cable Force Monitoring in Tendon-Anchorage Using Portable PZT-Interface Technique vol.2014, 2014, https://doi.org/10.1155/2014/784731
  8. Wireless structural health monitoring of stay cables under two consecutive typhoons vol.1, pp.1, 2014, https://doi.org/10.12989/smm.2014.1.1.047
  9. Wireless health monitoring of stay cable using piezoelectric strain response and smart skin technique vol.12, pp.3_4, 2013, https://doi.org/10.12989/sss.2013.12.3_4.381
  10. Temperature effect on wireless impedance monitoring in tendon anchorage of prestressed concrete girder vol.15, pp.4, 2015, https://doi.org/10.12989/sss.2015.15.4.1159
  11. Compensation of temperature effect on impedance responses of PZT interface for prestress-loss monitoring in PSC girders vol.17, pp.6, 2016, https://doi.org/10.12989/sss.2016.17.6.881
  12. Feasibility Verification of Mountable PZT-Interface for Impedance Monitoring in Tendon-Anchorage vol.2015, 2015, https://doi.org/10.1155/2015/262975
  13. Local dynamic characteristics of PZT impedance interface on tendon anchorage under prestress force variation vol.15, pp.2, 2015, https://doi.org/10.12989/sss.2015.15.2.375
  14. Investigation of a new experimental method for damage assessment of RC beams failing in shear using piezoelectric transducers vol.114, 2016, https://doi.org/10.1016/j.engstruct.2016.02.014
  15. Wire Breakage Detection Using Relative Strain Variation in Unbonded Posttensioning Anchors vol.20, pp.1, 2015, https://doi.org/10.1061/(ASCE)BE.1943-5592.0000639
  16. Vibration-Based Monitoring of Stay-Cable Force Using Wireless Piezoelectric-Based Strain Sensor Nodes vol.32, pp.6, 2012, https://doi.org/10.7779/JKSNT.2012.32.6.669
  17. RBFN-based temperature compensation method for impedance monitoring in prestressed tendon anchorage vol.25, pp.6, 2018, https://doi.org/10.1002/stc.2173
  18. Experimental Analysis on Pre-Stress Friction Loss of Crushed Limestone Sand Concrete Beams vol.8, pp.5, 2018, https://doi.org/10.3390/app8050683
  19. Quantitative damage identification in tendon anchorage via PZT interface-based impedance monitoring technique vol.20, pp.2, 2012, https://doi.org/10.12989/sss.2017.20.2.181
  20. Experimental investigation of magnetic-mount PZT-interface for impedance-based damage detection in steel girder connection vol.4, pp.3, 2017, https://doi.org/10.12989/smm.2017.4.3.237
  21. Advances and challenges in impedance-based structural health monitoring vol.4, pp.4, 2012, https://doi.org/10.12989/smm.2017.4.4.301
  22. PCA-based filtering of temperature effect on impedance monitoring in prestressed tendon anchorage vol.22, pp.1, 2018, https://doi.org/10.12989/sss.2018.22.1.057
  23. Advances in the Structural Health Monitoring of Bridges Using Piezoelectric Transducers vol.18, pp.12, 2012, https://doi.org/10.3390/s18124312
  24. Sensor Fault Diagnosis for Impedance Monitoring Using a Piezoelectric-Based Smart Interface Technique vol.20, pp.2, 2020, https://doi.org/10.3390/s20020510
  25. Understanding Impedance Response Characteristics of a Piezoelectric-Based Smart Interface Subjected to Functional Degradations vol.2021, pp.None, 2012, https://doi.org/10.1155/2021/5728679
  26. Deep learning-based functional assessment of piezoelectric-based smart interface under various degradations vol.28, pp.1, 2021, https://doi.org/10.12989/sss.2021.28.1.069
  27. An Innovative Smart Concrete Anchorage with Self-Stress Sensing Capacity of Prestressing Stress of PS Tendon vol.21, pp.15, 2021, https://doi.org/10.3390/s21155251
  28. Anchor Force Monitoring Using Impedance Technique with Single-Point Mount Lead-Zirconate-Titanate Interface: A Feasibility Study vol.11, pp.9, 2012, https://doi.org/10.3390/buildings11090382
  29. A Low-Cost Prestress Monitoring Method for Post-Tensioned RC Beam Using Piezoelectric-Based Smart Strand vol.11, pp.10, 2012, https://doi.org/10.3390/buildings11100431
  30. Optimal Localization of Smart Aggregate Sensor for Concrete Damage Monitoring in PSC Anchorage Zone vol.21, pp.19, 2012, https://doi.org/10.3390/s21196337
  31. Numerical Simulation of Single-Point Mount PZT-Interface for Admittance-Based Anchor Force Monitoring vol.11, pp.11, 2012, https://doi.org/10.3390/buildings11110550