DOI QR코드

DOI QR Code

Improved interfacial stress analysis of a plated beam

  • Hao, Sheng-Wang (School of Civil Engineering and Mechanics, Yanshan University) ;
  • Liu, Yan (School of Civil Engineering and Mechanics, Yanshan University) ;
  • Liu, Xiao-Dan (School of Civil Engineering and Mechanics, Yanshan University)
  • 투고 : 2012.03.21
  • 심사 : 2012.11.13
  • 발행 : 2012.12.25

초록

A plated beam is strengthened by bonding a thin plate to the tension face; it often fails because of premature debonding of the thin plate from the original beam in a brittle manner. A sound understanding of the mechanism of such debonding failure is very important for the effective use of this strengthening technique. This paper presents an improved analytical solution for interfacial stresses that incorporates multiple loading conditions simultaneously, including prestress, mechanical and thermal loads, and the effects of adherend shear deformations and curvature mismatches between the beam and the plate. Simply supported beams bonded with a thin prestressing plate and subjected to both mechanical and thermal loading were considered in the present work. The effects of the curvature mismatch and adherend shear deformations of the beam and plate were investigated and compared. The main mechanisms affecting the distribution of interfacial stresses were analyzed. Both the normal and shear stresses were found to be significantly influenced by the coupled effects of the elastic moduli with the ratios $E_a/E_b$ and $E_a/E_p$.

키워드

참고문헌

  1. Ahmed, O., Van Gemert, D. and Vandewalle, L. (2001), "Improved model for plate-end shear of CFRP strengthened RC beams", Cem. Concr. Compos., 23, 3-19. https://doi.org/10.1016/S0958-9465(00)00051-2
  2. Arduini, M., Di-Tommaso, A. and Nanni, A. (1997), "Brittle failure in FRP plate and sheet bonded beams", ACI Struct. J., 94(4), 363-369.
  3. Arslan, G., Sevuk, F. and Ekiz, I. (2008), "Steel plate contribution to load-carrying capacity of retrofitted RC beams", Constr. Build. Mater., 22, 143-153. https://doi.org/10.1016/j.conbuildmat.2006.10.009
  4. Ascione, L. and Feo, L. (2000), "Modelling of composite/concrete interface of RC beams strengthened with composite laminates", Compos. Part B-Eng., 31, 535-540. https://doi.org/10.1016/S1359-8368(99)00063-3
  5. Barnes, R.A. and Mays, G.C. (2001), "The transfer of stress through a steel to concrete adhesive bond", Int. J. Adhes. Adhes., 21, 495-502. https://doi.org/10.1016/S0143-7496(01)00031-8
  6. Benachour, A., Benyoucef, S., Tounsi, A. and Adda bedia, E.A. (2008), "Interfacial stress analysis of steel beams reinforced with bonded prestressed FRP plate", Eng. Struct., 30, 3305-3315. https://doi.org/10.1016/j.engstruct.2008.05.007
  7. Benyoucef, S., Tounsi, A., Meftah, S.A. and Adda Bedia, E.A. (2006), "Approximate analysis of the interfacial stress concentrations in FRP-RC hybrid beams", Compos. Interfaces, 13(7), 561-571. https://doi.org/10.1163/156855406778440758
  8. Bonacci, J.F. and Maalej, M. (2001), "Behavioral trends of RC beams strengthened with externally bonded FRP", J. Compos. Constr. ASCE, 5(2), 102-113. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:2(102)
  9. Chen, J.F. and Teng, J.G. (2003), "Shear capacity of FRP-strengthened RC beams: FRP debonding", Constr. Build. Mater., 17, 27-41. https://doi.org/10.1016/S0950-0618(02)00091-0
  10. Deng, J., Lee, M.M.K. and Moy, S.S.J. (2004), "Stress analysis of steel beams reinforced with a bonded CFRP plate", Compos. Struct., 65, 205-215. https://doi.org/10.1016/j.compstruct.2003.10.017
  11. Etman, E.E. and Beeby, A.W. (2000), "Experimental program and analytical study of bond stress distributions on a composite plate bonded to a reinforced concrete beam", Cement Concrete Compos., 22, 281-291. https://doi.org/10.1016/S0958-9465(00)00030-5
  12. Fanning, P.J. and Kelly, O. (2001), "Ultimate response of RC beams strengthened with CFRP plates", J. Compos. Constrt. ASCE, 5(2), 122-127. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:2(122)
  13. Gao, B., Leung, C.K.Y. and Kim, J.K. (2005), "Prediction of concrete cover separation failure for RC beams strengthened with CFRP strips", Eng. Struct., 27(2), 177-189. https://doi.org/10.1016/j.engstruct.2004.09.007
  14. Garden, H.N., Quantrill, R.J., Hollaway, L.C., Thorne, A.M. and Parke, G.A.R. (1998), "An experimental study of the anchorage length of carbon fiber composite plates used to strengthen reinforced concrete beams", Constr. Build. Mater., 12, 203-219. https://doi.org/10.1016/S0950-0618(98)00002-6
  15. Hao, S.W., Li, Y.Y., Sun, J., Liu, Q., Wang, B. and Yang, H.Z. (2010), "A coupling solution for interfacial stresses in a plated beam", J. Strain Anal. Eng., 45(7), 513-521. https://doi.org/10.1243/03093247JSA612
  16. Jones, R., Swamy, R.N. and Charif, A. (1988), "Plate separation and anchorage of reinforced concrete beams strengthened by epoxy bonded steel plates", Struct. Eng., 66(5), 85-94.
  17. Kelmar, E.L., Hordijk, D.A. and Hermes, M.C.J. (2008), "The influence of temperature on RC beams strengthened with externally bonded CFRP reinforcement", Heron, 53(3), 157-185.
  18. Maalej, M. and Bian, Y. (2001), "Interfacial shear stress concentration in FRP-strengthened beams", Compos. Struct., 54, 417-426. https://doi.org/10.1016/S0263-8223(01)00078-2
  19. Maalej, M. and Leong, K.S. (2005), "Effect of beam size and FRP thickness on interfacial shear stress concentration and failure mode of FRP-strengthened beams", Compos. Sci. Technol., 65, 1148-1158. https://doi.org/10.1016/j.compscitech.2004.11.010
  20. Malek, A.M., Saadatmanesh, H. and Ehsani, M.R. (1998), "Prediction of failure load of R/C beams strengthened with FRP plate due to stress concentration at the plate end", ACI Struct. J., 95(1), 142-152.
  21. Oehlers, D.J. (1992), "Reinforced concrete beams with plates glued to their soffits", J. Struct. Eng. ASCE, 118(8), 2023-2038. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:8(2023)
  22. Rabinovitch, O. (2010), "Impact of thermal loads on interfacial debonding in FRP strengthened beams", Int. J. Solids Struct., 47, 3234-3244. https://doi.org/10.1016/j.ijsolstr.2010.08.003
  23. Rabinovich, O. and Frostig, Y. (2000), "Closed-form high-order analysis of RC beams strengthened with FRP strips", J. Compos. Constr. ASCE, 4(2), 65-74. https://doi.org/10.1061/(ASCE)1090-0268(2000)4:2(65)
  24. Rahimi, H. and Hutchinson, A. (2001), "Concrete beams strengthened with externally bonded FRP plates", J. Compos. Constr. ASCE, 5(1), 44-56. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:1(44)
  25. Raoof, M., El-Rimawi, J.A. and Hassanen, M.A.H. (2000), "Theoretical and experimental study on externally plated RC beams", Eng. Struct., 22, 85-101. https://doi.org/10.1016/S0141-0296(98)00056-X
  26. Rasheed, H.A. and Pervaiz, S. (2002), "Bond slip analysis of fiber-reinforced polymer-strengthened beams", J. Eng. Mech., 128, 78-86. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:1(78)
  27. Roberts, T.M. (1989), "Approximate analysis of shear and normal stress concentrations in the adhesive layer of plated RC beams", Struct. Eng., 67(12), 229-233.
  28. Roberts, T.M. and Haji-Kazemi, H. (1989), "A theoretical study of the behaviour of reinforced concrete beams strengthened by externally bonded steel plates", P. I. Civil Eng. PT 2, 87, 39-55.
  29. Saadatmanesh, H. and Ehsani, M.R. (1991), "RC beams strengthened with GFRP plates: I. Experimental study", J. Struct. Eng. ASCE, 117(11), 3417-3433. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:11(3417)
  30. Schnerch, D., Dawood, M., Rizkalla, S. and Stamford, K. (2006), "Bond behavior of CFRP strengthened steel structures", Adv. Struct. Eng., 9(6), 805-817. https://doi.org/10.1260/136943306779369464
  31. Shen, H.S., Teng, J.G. and Yang, J. (2001), "Interfacial stresses in beams and slabs bonded with a thin plate", J. Eng. Mech. ASCE, 127(4), 399-406. https://doi.org/10.1061/(ASCE)0733-9399(2001)127:4(399)
  32. Smith, S.T. and Teng, J.G. (2002a), "FRP-strengthened RC beams. I: Review of debonding strength models", Eng. Struct., 24(4), 385-395. https://doi.org/10.1016/S0141-0296(01)00105-5
  33. Smith, S.T. and Teng, J.G. (2002b), "FRP-strengthened RC beams. II: Assessment of debonding strength models", Eng. Struct., 24(4), 397-417. https://doi.org/10.1016/S0141-0296(01)00106-7
  34. Smith, S.T. and Teng, J.G. (2001), "Interfacial stresses in plated beams", Eng. Struct., 23(7), 857-871. https://doi.org/10.1016/S0141-0296(00)00090-0
  35. Stratford, T. and Cadei, J. (2006), "Elastic analysis of adhesion stresses for the design of a strengthening plate bonded to a beam", Constr. Build. Mater., 20, 34-45. https://doi.org/10.1016/j.conbuildmat.2005.06.041
  36. Swamy, R.N., Jones, R. and Charif, A. (1989), "The effect of external plate reinforcement on the strengthening of structurally damaged RC beams", Struct. Eng., 67(3), 45-56.
  37. Taljsten, B. (1997), "Strengthening of beams by plate bonding", J. Mater. Civil. Eng. ASCE, 9(4), 206-212. https://doi.org/10.1061/(ASCE)0899-1561(1997)9:4(206)
  38. Teng, J.G., Zhang, J.W. and Smith, S.T. (2002), "Interfacial stresses in RC beams bonded with a soffit plate: a finite element study", Constr. Build. Mater., 16(1), 1-14. https://doi.org/10.1016/S0950-0618(01)00029-0
  39. Tounsi, A. (2006), "Improved theoretical solution for interfacial stresses in concrete beams strengthened with FRP plate", Int. J. Solids Struct., 43, 4154-4174. https://doi.org/10.1016/j.ijsolstr.2005.03.074
  40. Tounsi, A. and Benyoucef, S. (2007), "Interfacial stresses in externally FRP-plated concrete beams", Int. J. Adhes. Adhes., 27, 207-215. https://doi.org/10.1016/j.ijadhadh.2006.01.009
  41. Tounsi, A., Hassaine Daouadji, T., Benyoucef, S. and Addabedia, E.A. (2009), "Interfacial stresses in FRP-plated RC beams: Effect of adherend shear deformations", Int. J. Adhes. Adhes., 29, 343-351. https://doi.org/10.1016/j.ijadhadh.2008.06.008
  42. Tsai, M.Y., Oplinger, D.W. and Morton, J. (1998), "Improved theoretical solutions for adhesive lap joints", Int. J. Solids Struct., 35(12), 1163-1185. https://doi.org/10.1016/S0020-7683(97)00097-8
  43. Wang, J. (2006), "Debonding of FRP-plated reinforced concrete beam, a bond-slip analysis. I. Theoretical formulation", Int. J. Solids Struct., 43, 6649-6664. https://doi.org/10.1016/j.ijsolstr.2006.01.014
  44. Wang, J. and Zhang, C. (2010), "A three-parameter elastic foundation model for interface stresses in curved beams externally strengthened by a thin FRP plate", Int. J. Solids Struct., 47, 998-1006. https://doi.org/10.1016/j.ijsolstr.2009.12.017
  45. Yang, J., Chen, J.F. and Teng, J.G. (2009), "Interfacial stress analysis of plated beams under symmetric mechanical and thermal loading", Constr. Build. Mater., 23, 2973-2987. https://doi.org/10.1016/j.conbuildmat.2009.05.004
  46. Yang, J. and Wu, Y.F. (2007), "Interfacial stresses of FRP strengthened concrete beams: Effect of shear deformation", Compos. Struct., 80, 343-351. https://doi.org/10.1016/j.compstruct.2006.05.016
  47. Yang, J. and Ye, J. (2010), "An improved closed-form solution to interfacial stresses in plated beams using a two-stage approach", Int. J. Mech. Sci., 52, 13-30. https://doi.org/10.1016/j.ijmecsci.2009.09.041
  48. Yao, J. and Teng, J.G. (2007), "Plate end debonding in FRP-plated RC beams-I: Experiments", Eng. Struct., 29, 2457-2471. https://doi.org/10.1016/j.engstruct.2006.11.022
  49. Ziraba, Y.N. and Baluch, M.H. (1995), "Computational model for reinforced concrete beams strengthened by epoxy bonded steel plates", Finite Elem. Anal. Des., 20, 253-271. https://doi.org/10.1016/0168-874X(95)00032-O

피인용 문헌

  1. Intermediate crack-induced debonding analysis for RC beams strengthened with FRP plates vol.56, pp.3, 2015, https://doi.org/10.12989/sem.2015.56.3.473
  2. Effect of tapered-end shape of FRP sheets on stress concentration in strengthened beams under thermal load vol.17, pp.5, 2014, https://doi.org/10.12989/scs.2014.17.5.601
  3. Predictions of the maximum plate end stresses of imperfect FRP strengthened RC beams: study and analysis vol.9, pp.4, 2012, https://doi.org/10.12989/amr.2020.9.4.265