DOI QR코드

DOI QR Code

Strengthening of reinforced concrete beams with epoxy-bonded perforated steel plates

  • Aykac, Sabahattin (Civil Engineering Department, Engineering Faculty, Gazi University) ;
  • Kalkan, Ilker (Department of Civil Engineering, Faculty of Engineering, Kirikkale University) ;
  • Uysal, Ali (Turkish Army Corps of Engineers, Civil Engineering Group)
  • 투고 : 2011.11.16
  • 심사 : 2012.12.01
  • 발행 : 2012.12.25

초록

Although being one of the most popular strengthening techniques in reinforced concrete beams, the use of steel plates bonded to the soffit raises problems of ductility. This study aims at investigating the influence of the use of perforated steel plates instead of solid steel plates on the ductility of reinforced concrete beams. A total of nine reinforced concrete beams were tested. In addition to an unplated beam, eight beams with perforated steel plates of two different thicknesses (3 mm and 6 mm) were subjected to monotonic loading. Effect of bonding the plates to the beams with anchor bolts and with additional side plates bonded to the sides of the beam with and without anchors is also investigated. The use of bolts in addition to epoxy was found to greatly contribute to the ductility and energy absorption capacity of the beams, particularly in specimens with thick plates (6 mm) and the use side plates in addition to the bottom plate was found to be ineffective in increasing the ductility of a concrete beam unless the side plates are attached to the beam with anchors bolts. The thickness of the plate was found to have little effect on the bending rigidity of the beam.

키워드

참고문헌

  1. ACI Committee 318 (1989), Building Code Requirements for Reinforced Concrete (ACI 318-89) and Commentary (ACI 318-89R), American Concrete Institute, Detroit, USA.
  2. ACI Committee 318 (2005), Building Code Requirements for Structural Concrete and Commentary (ACI 318M- 05), American Concrete Institute, Farmington Hills, Mich., USA.
  3. Altin, S., Anil, O. and Kara, M.E. (2005), "Improving shear capacity of existing RC beams using external bonding of steel plates", Eng. Struct., 27(5), 781-791. https://doi.org/10.1016/j.engstruct.2004.12.012
  4. Arslan, M. (1991), "Strengthening of reinforced concrete beams by epoxy glued steel plates", M.Sc. Thesis, Gazi University, Inst. of Science and Technology, Ankara, Turkey.
  5. Arslan, G., Sevuk, F. and Ekiz, I. (2008), "Steel plate contribution to load-carrying capacity of retrofitted RC beams", Constr. Build. Mater., 22(3), 143-153. https://doi.org/10.1016/j.conbuildmat.2006.10.009
  6. Aykac, S. and Ozbek, E. (2011), "Strengthening of reinforced concrete t-beams with steel plates (in Turkish)", Tech. J. Turk. Chamber Civ. Eng., 22(1), 5319-5334.
  7. Barnes, R.A. and Mays, G.C. (2006a), "Strengthening of reinforced concrete beams in shear by the use of externally bonded steel plates: Part 1-Experimental programme", Constr. Build. Mater., 20(6), 396-402. https://doi.org/10.1016/j.conbuildmat.2005.01.034
  8. Barnes, R.A. and Mays, G.C. (2006b), "Strengthening of reinforced concrete beams in shear by the use of externally bonded steel plates: Part 2-Design guidelines", Constr. Build. Mater., 20(6), 403-411. https://doi.org/10.1016/j.conbuildmat.2005.01.028
  9. British Standards Institution, BSI (1997), "BS 8110-1: 1997, Structural Use of Concrete - Part 1: Code of Practice for Design and Construction", London, UK.
  10. Hognestad, E., Hanson, N.W. and McHenry, D. (1955), "Concrete stress distribution in ultimate strength design", ACI J. Proc., 52(4), 475-479.
  11. Hussain, M., Sharif, A., Basunbul, I.A., Baluch, M.H. and Al-Sulaimani, G.J. (1995), "Flexural behavior of precracked reinforced concrete beams strengthened externally by steel plates", ACI Struct. J., 92(1), 14-22.
  12. L'Hermite, R. and Bresson, J. (1967), "Concrete reinforced with glued plates", RILEM International Symposium. Synthetic Resins in Building, Paris, France.
  13. Oehlers, D.J. (1992), "Reinforced concrete beams with plates glued to their soffits", J. Struct. Eng., ASCE, 118(8), 2023-2038. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:8(2023)
  14. Oehlers, D.J. and Moran, J.P. (1990), "Premature failure of externally plated reinforced concrete beams", J. Struct. Eng., ASCE, 116(4), 978-995. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:4(978)
  15. Raoof, M., El-Rimawi, J.A. and Hassanen, M.A.H. (2000), "Theoretical and experimental study on externally plated R.C. beams", Eng. Struct., 22(1), 85-101. https://doi.org/10.1016/S0141-0296(98)00056-X
  16. Raoof, M. and Zhang, S. (1997), "An insight into the structural behavior of R.C. beams with externally bonded plates", Proc. Inst. Civ. Eng. Civ. Eng. Struct. Build., 122(4), 477-492. https://doi.org/10.1680/istbu.1997.29836
  17. Sallam, H.E.M., Saba, A.M., Shahin, H.H. and Abdel-Raouf, H. (2004), "Prevention of peeling failure in plated beams", J. Adv. Concr. Technol., 2(3), 419-429. https://doi.org/10.3151/jact.2.419
  18. Su, R.K.L. and Zhu, Y. (2005), "Experimental and numerical studies of external steel plate strengthened reinforced concrete coupling beams", Eng. Struct., 27(10), 1537-1550. https://doi.org/10.1016/j.engstruct.2005.04.012
  19. Tankut, T. and Arslan, M. (1992), "Behaviour of reinforced concrete beams strengthened by epoxy-bonded steel plates", Tech. J. Turk. Chamber Civ. Eng., 92, 176-185.
  20. Todeschini, C.E., Bianchini A.C. and Kesler C.E. (1964), "Behavior of concrete columns reinforced with high strength steels", ACI J., Proc., 61(6), 701-716.
  21. Ziraba, Y.N., Baluch, M.H., Basunbul, I.A., Sharif, A.M., Azad, A.K. and Al-Sulaimani, G.J. (1994), "Guidelines toward the design of reinforced concrete beams with external plates", ACI Struct. J., 91(6), 639-646.
  22. Zhu, Y. and Su, R.K.L. (2010), "Behavior of strengthened reinforced concrete coupling beams by bolted steel plates, Part 2: Evaluation of theoretical strength", Struct. Eng. Mech., 34(5), 563-580. https://doi.org/10.12989/sem.2010.34.5.563
  23. Zhu, Y., Su, R.K.L. and Zhou, F.L. (2007), "Seismic behavior of strengthened reinforced concrete coupling beams by bolted steel plates, Part 1: Experimental study", Struct. Eng. Mech., 27(2), 149-172. https://doi.org/10.12989/sem.2007.27.2.149

피인용 문헌

  1. Eliminating concrete cover separation of NSM strengthened beams by CFRP end anchorage vol.56, pp.6, 2015, https://doi.org/10.12989/sem.2015.56.6.899
  2. Strengthening of RC beams with prefabricated RC U cross-sectional plates vol.49, pp.6, 2014, https://doi.org/10.12989/sem.2014.49.6.673
  3. Investigation of the effects of connectors to enhance bond strength of externally bonded steel plates and CFRP laminates with concrete vol.20, pp.6, 2016, https://doi.org/10.12989/scs.2016.20.6.1275
  4. Non-Probabilistic Reliability of RC Bridge Retrofitted in Flexure with Externally Bonded Steel Plates vol.351-352, pp.1662-7482, 2013, https://doi.org/10.4028/www.scientific.net/AMM.351-352.1590
  5. Effect of layer length on deflection in sandwich beams vol.9, pp.3, 2017, https://doi.org/10.1007/s40091-017-0159-8
  6. Influence of Further Corrosion on Structural Behavior of Corroded Reinforced-Concrete Beam Strengthened with Steel Plate Using Different Strengthening Schemes vol.34, pp.2, 2020, https://doi.org/10.1061/(asce)cf.1943-5509.0001402
  7. Repair of historic stone pagoda: Flexural behavior of granite reinforced with stainless steel bars vol.23, pp.11, 2012, https://doi.org/10.1177/1369433220915609