Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Strength of biaxially loaded high strength reinforced concrete columns

  • Dundar, Cengiz (Faculty of Engineering and Architecture (Civil), Cukurova University) ;
  • Tokgoz, Serkan (Faculty of Engineering (Civil), Mersin University)
  • Received : 2010.09.27
  • Accepted : 2012.11.01
  • Published : 2012.12.10
⟨ Previous Next ⟩

Abstract

An experimental research was conducted to investigate the strength of biaxially loaded short and slender reinforced concrete columns with high strength concrete. In the study, square and L-shaped section reinforced concrete columns were constructed and tested to obtain the load-deformation behaviour and strength of columns. The test results of column specimens were analysed with a theoretical method based on the fiber element technique. The theoretical ultimate strength capacities and the test results of column specimens have been compared and discussed in the paper. Besides this, observed failure mode and experimental and theoretical load-lateral deflection behaviour of the column specimens are presented.

Keywords

References

  1. ACI 318 (2005), Building Code Requirements for Structural Concrete, Detroit (MI), American Concrete Institute.
  2. ACI Committee 363 (1984), "State of art report on high strength concrete", ACI J., 81(4), 364-411.
  3. ACI-ASCE Committee 441 (1997), "High-strength concrete columns: State of the art", ACI Struct. J., 94(3), 323-335.
  4. Campione, G. (2008), "Analytical model for high-strength concrete columns with square cross-section", Struct. Eng. Mech., 28(3), 295-316. https://doi.org/10.12989/sem.2008.28.3.295
  5. Canbay, E., Ozcebe, G. and Ersoy, U. (2006), "High-strength concrete columns under eccentric load", J. Struct. Eng. ASCE, 132(7), 1052-1060. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:7(1052)
  6. Cusson, D. and Paultre, P. (1992), "Stress-strain model for confined high-strength concrete", J. Struct. Eng. ASCE, 121(3), 468-477.
  7. Cusson, D. and Paultre, P. (1995), "Stress-strain model for confined high-strength concrete", J. Struct. Eng. ASCE, 121(3), 468-477. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:3(468)
  8. Diniz, S.M.C. and Frangopol, D.M. (2003), "Safety evaluation of slender high-strength concrete columns under sustained loads", Comput. Struct., 81, 1475-1486. https://doi.org/10.1016/S0045-7949(03)00085-3
  9. Foster, S.L. and Attard, M.M. (1997), "Experimental tests on eccentrically loaded high-strength concrete columns", ACI Struct. J., 94(3), 295-303.
  10. Ho, J.C.M. (2011), "Inelastic design of high-axially loaded concrete columns in moderate seismicity regions", Struct. Eng. Mech., 39(4), 559-578. https://doi.org/10.12989/sem.2011.39.4.559
  11. Hsu, C.T.T., Hsu, L.S.M. and Tsao, W.H. (1995), "Biaxially loaded slender high-strength reinforced concrete columns with and without steel fibres", Mag. Concrete Res., 47(173), 299-310. https://doi.org/10.1680/macr.1995.47.173.299
  12. Hsu, L.S.M. and Hsu, C.T.T. (1992), "Stress-strain behavior of plain and fibrous high strength concrete under compression", Technical Report 92-1, Structural Concrete Series, Department of Civil and Environmental Engineering, NJIT, Newark.
  13. Ibrahim, H.H.H. and MacGregor, J.G. (1996), "Tests of eccentrically loaded high-strength concrete columns", ACI Struct. J., 93(5), 585-594.
  14. Ibrahim, H.H.H. and MacGregor, J.G. (1997), "Modification of the ACI rectangular stress block for high-strength concrete", ACI Struct. J., 94(1), 40-48.
  15. Lee, J.H. and Son, H.S. (2000), "Failure and strength of high-strength concrete columns subjected to eccentric loads", ACI Struct. J., 97(1), 75-85.
  16. Lloyd, N.A. and Rangan, B.V. (1996), "Studies on high-strength concrete columns under eccentric compression", ACI Struct. J., 93(6), 631-638.
  17. Lou, T.J. and Xiang, Y.Q. (2008), "Numerical method for biaxially loaded reinforced and prestressed concrete slender columns with arbitrary section", Struct. Eng. Mech., 28(5), 587-601. https://doi.org/10.12989/sem.2008.28.5.587
  18. Mendis, P.A., Kovacic, D. and Setunge, S. (2000), "Basis for the design of lateral reinforcement for high-strength concrete columns", Struct. Eng. Mech., 9(6), 589-600. https://doi.org/10.12989/sem.2000.9.6.589
  19. Rangan, B.V. (1990), "Strength of reinforced concrete slender columns", ACI Struct. J., 87(1), 32-38.
  20. Rangan, B.V. (1999), "Studies on high-performance high-strength concrete columns", Proceedings of the Second CANMET/ACI International Conference, Gramado, Brazil.
  21. Saatcioglu, M. and Razvi, S.R. (1998), "High-strength concrete columns with square sections under concentric compression", J. Struct. Eng. ASCE, 124(12), 1438-1447. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:12(1438)
  22. Sarker, P.K. and Rangan, B.V. (2003), "Reinforced concrete columns under unequal load eccentricities", ACI Struct. J., 100(4), 519-528.
  23. Stewart, M.G. and Attard, M.M. (1999), "Reliability and model accuracy for high-strength concrete column design", J. Struct. Eng. ASCE, 125(3), 290-300. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:3(290)
  24. Wang, Y., Ma, Y.S. and Wu, H.L. (2011), "Reinforced high-strength concrete square columns confined by aramid FRP jackets. part I: experimental study", Steel Compos. Struct., 11(6), 455-468. https://doi.org/10.12989/scs.2011.11.6.455
  25. Tokgoz, S. (2009), "Effects of steel fiber addition on the behaviour of biaxially loaded high strength concrete columns", Mater. Struct., 42(8), 1125-1138. https://doi.org/10.1617/s11527-008-9448-9
  26. Yalcin, C. and Saatcioglu, M. (2000), "Inelastic analysis of reinforced concrete columns", Comput. Struct., 77(5), 539-555. https://doi.org/10.1016/S0045-7949(99)00228-X

Cited by

  1. A Highly Accurate Algorithm for Nonlinear Numerical Simulation of RC Columns Under Biaxial Bending Moment and Axial Loading Applying Rotary Oblique Fiber-Element Discretization vol.15, pp.8, 2017, https://doi.org/10.1007/s40999-017-0260-1
  2. Performance of HSC columns under severe cyclic loading vol.13, pp.2, 2015, https://doi.org/10.1007/s10518-014-9617-x
  3. Seismic response of current RC buildings in Kathmandu Valley vol.53, pp.4, 2015, https://doi.org/10.12989/sem.2015.53.4.791
  4. Nonlinear numerical simulation of RC columns subjected to cyclic oriented lateral force and axial loading vol.53, pp.4, 2015, https://doi.org/10.12989/sem.2015.53.4.745
  5. Studies on T-Shaped composite columns consist of multi separate concrete-filled square tubular steel sections under eccentric axial load vol.22, pp.2, 2016, https://doi.org/10.12989/scs.2016.22.2.217
  6. Compression-bending performance of L-shaped column composed of concrete filled square steel tubes under eccentric compression vol.17, pp.1, 2017, https://doi.org/10.1007/s13296-016-0128-2
  7. A state of the art review of fiberless and steel fiber reinforced high strength concrete columns behavior under various loadings vol.1895, pp.1, 2012, https://doi.org/10.1088/1742-6596/1895/1/012050