Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Modified Tikhonov regularization in model updating for damage identification

  • Wang, J. (School of Civil Engineering, Beijing Jiaotong University) ;
  • Yang, Q.S. (School of Civil Engineering, Beijing Jiaotong University)
  • Received : 2011.08.22
  • Accepted : 2012.10.24
  • Published : 2012.12.10
⟨ Previous Next ⟩

Abstract

This paper presents a Modified Tikhonov Regularization (MTR) method in model updating for damage identification with model errors and measurement noise influences consideration. The identification equation based on sensitivity approach from the dynamic responses is ill-conditioned and is usually solved with regularization method. When the structural system contains model errors and measurement noise, the identified results from Tikhonov Regularization (TR) method often diverge after several iterations. In the MTR method, new side conditions with limits on the identification of physical parameters allow for the presence of model errors and ensure the physical meanings of the identified parameters. Chebyshev polynomial is applied to approximate the acceleration response for moderation of measurement noise. The identified physical parameter can converge to a relative correct direction. A three-dimensional unsymmetrical frame structure with different scenarios is studied to illustrate the proposed method. Results revealed show that the proposed method has superior performance than TR Method when there are both model errors and measurement noise in the structure system.

Keywords

References

  1. Bicanic, N. and Chen, H.P. (1997), "Damage identification in framed structures using natural frequencies", Int. J. Num. Meth. Eng., 40(23), 4451-4468. https://doi.org/10.1002/(SICI)1097-0207(19971215)40:23<4451::AID-NME269>3.0.CO;2-L
  2. Cawley, P. and Adams, R.D. (1979), "The location of defects in structures from measurements of natural frequencies", J. Strain. Anal. Eng. Deg., 14(2), 49-57. https://doi.org/10.1243/03093247V142049
  3. Golub, G.H. and Van Loan, C.F. (1996), Matrix Computations, Johns Hopkins University Press, Baltimore, MD.
  4. Hansen, P.C. (1987), "The truncated SVD as a method for regularization", Bit. Num. Math., 27(4), 534-553. https://doi.org/10.1007/BF01937276
  5. Hansen, P.C. (1992), "Analysis of discrete ill-posed problems by means of the L-curve", Soc. Ind. appl. Math., 34(4), 561-580.
  6. Hassiotis, S. and Jeong, G.D. (1993), "Assessment of structural damage from natural frequency measurements", Comput. Struct., 49(4), 679-691. https://doi.org/10.1016/0045-7949(93)90071-K
  7. Li, X.Y. and Law, S.S. (2010), "Adaptive Tikhonov regularization for damage detection based on nonlinear model updating", Mech. Syst. Signal. Pr., 24(6), 1646-1664. https://doi.org/10.1016/j.ymssp.2010.02.006
  8. Lu, Z.R. and Law, S.S. (2007), "Features of dynamic response sensitivity and its application in damage detection", J. Sound. Vib., 303(1-2), 305-329. https://doi.org/10.1016/j.jsv.2007.01.021
  9. Ni, H.D. and Chen, Y. (2009), "The research of Chebyshev Polynomials' Fitting applied in vehicle navigation", GNSS. World. China., 6, 37-42.
  10. Osegueda, R.A., Carrasco, C.J. and Meza, R. (1997), "A modal strain energy distribution method to localize and quantify damage", Proceedings of the 15th International Modal Analysis Conference, Orlando, Florida, February.
  11. Pandey, A.K., Biswas, M. and Samman, M.M. (1991), "Damage detection from changes in curvature mode shapes", J. Sound. Vib., 145(2), 321-332. https://doi.org/10.1016/0022-460X(91)90595-B
  12. Tikhonov, A.N. (1963), "Solution of incorrectly formulated problems and the regularization method", Soviet. Math. Dokl., 4, 1035-1038.
  13. Titurus, B. and Friswell, M.I. (2008), "Regularization in model updating", Int. J. Numer. Meth. Eng., 75(4), 440-478. https://doi.org/10.1002/nme.2257
  14. Toksoy, T. and Aktan, A.E. (1994), "Bridge-condition assessment by modal flexibility", Exp. Mech., 34(3), 271-278. https://doi.org/10.1007/BF02319765
  15. Vogel, C.R. (2002), Computational Methods for Inverse Problems, Frontiers in Applied Mathematics, SIAM, Philadelphia, PA.
  16. Weber, B., Paultre, P. and Proulx, J. (2009), "Consistent regularization of nonlinear model updating for damage identification", Mech. Syst. Signal. Pr., 23(6), 1965-1985. https://doi.org/10.1016/j.ymssp.2008.04.011

Cited by

  1. FE model updating method incorporating damping matrices for structural dynamic modifications vol.52, pp.2, 2014, https://doi.org/10.12989/sem.2014.52.2.261
  2. Computational finite element model updating tool for modal testing of structures vol.51, pp.2, 2014, https://doi.org/10.12989/sem.2014.51.2.229
  3. Sensor selection approach for damage identification based on response sensitivity vol.4, pp.1, 2017, https://doi.org/10.12989/smm.2017.4.1.053
  4. An iterative method for damage identification of skeletal structures utilizing biconjugate gradient method and reduction of search space vol.23, pp.1, 2012, https://doi.org/10.12989/sss.2019.23.1.045
  5. Investigation of the SHM-oriented model and dynamic characteristics of a super-tall building vol.23, pp.3, 2019, https://doi.org/10.12989/sss.2019.23.3.295
  6. Identification of non-proportional structural damping using experimental modal analysis data vol.8, pp.1, 2012, https://doi.org/10.21595/jme.2020.21259
  7. An iterative total least squares‐based estimation method for structural damage identification of 3D frame structures vol.27, pp.4, 2012, https://doi.org/10.1002/stc.2499
  8. Anti-sparse representation for structural model updating using l∞ norm regularization vol.75, pp.4, 2012, https://doi.org/10.12989/sem.2020.75.4.477
  9. Review on the new development of vibration-based damage identification for civil engineering structures: 2010–2019 vol.491, pp.None, 2012, https://doi.org/10.1016/j.jsv.2020.115741
  10. Review on Vibration-Based Structural Health Monitoring Techniques and Technical Codes vol.13, pp.11, 2021, https://doi.org/10.3390/sym13111998