Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Vibration and stability of axially loaded cracked beams

  • Kisa, Murat (Department of Mechanical Engineering, Faculty of Engineering, Harran University)
  • Received : 2011.05.09
  • Accepted : 2012.10.09
  • Published : 2012.11.10
⟨ Previous Next ⟩

Abstract

Structural defects such as cracks are the source of local flexibilities and cause deficiencies in structural resistance. In the engineering constructions, structural elements sometimes are subjected to axial loading. Therefore, besides crack ratios and locations, influence of applied load on the stability and dynamical characteristics should also be explored. This study offers a numerical technique for the vibration and stability analysis of axially loaded cracked beams. The model merges finite element and component mode synthesis methods. Initially, stability analysis is completed and then dynamical characteristics of beams are found. Very good conformities between outcomes of the current study and those in literature, give the confidence that proposed method is reliable and effective.

Keywords

References

  1. Arbodela-Monsalve, L.G., Zapata-Medina, D.G. and Aristizabal-Ochoa, J.D. (2007), "Stability and natural frequencies of a weakened Timoshenko beam-column with generalized end conditions under constant axial load", J. Sound Vib., 307, 89-112. https://doi.org/10.1016/j.jsv.2007.06.059
  2. Aristizabal-Ochoa, J.D. (2007), "Static and dynamic stability of uniform shear beam-columns under generalized boundary conditions", J. Sound Vib., 307, 69-88. https://doi.org/10.1016/j.jsv.2007.06.049
  3. Aydin, K. (2007), "Vibratory characteristics of axially loaded Timoshenko beams with arbitrary number of cracks", J. Vib. Acoust., 129, 341-354. https://doi.org/10.1115/1.2731411
  4. Aydin, K. (2008), "Vibratory characteristics of Euler-Bernoulli beams with an arbitrary number of cracks subjected to axial load", J. Vib. Cont., 14, 485-510. https://doi.org/10.1177/1077546307080028
  5. Binici, B. (2005), "Vibration of beams with multiple open cracks subjected to axial force", J. Sound Vib., 287, 277-295. https://doi.org/10.1016/j.jsv.2004.11.010
  6. Brandon, J.A. and Abraham, O.N.L. (1995) "Counter-intuitive quasi-periodic motion in the autonomous vibration of cracked Timoshenko beams", J. Sound Vib., 185, 415-430. https://doi.org/10.1006/jsvi.1995.0389
  7. Chasalevris, A.C. and Papadopoulos, C.A. (2008), "Coupled horizontal and vertical bending vibrations of a stationary shaft with two cracks", J. Sound Vib., 309, 507-528. https://doi.org/10.1016/j.jsv.2007.07.039
  8. Cheng, Y., Yu, Z., Wu, X. and Yuan, Y. (2011), "Vibration analysis of a cracked rotating tapered beam using the p-version finite element method", Finite Elem. Anal. Des., 47, 825-834. https://doi.org/10.1016/j.finel.2011.02.013
  9. Darpe, A.K. (2007), "Coupled vibrations of a rotor with slant crack", J. Sound Vib., 305, 172-193. https://doi.org/10.1016/j.jsv.2007.03.079
  10. Dilena, M. and Morassi, A. (2002), "Identification of crack location in vibrating beams from changes in node positions", J. Sound Vib., 255, 915-930. https://doi.org/10.1006/jsvi.2001.4194
  11. Dimarogonas, A.D. and Paipetis, S.A. (1983), Analytical Methods in Rotor Dynamics, Applied Science Publishers.
  12. Gounaris, G. and Dimarogonas, A.D. (1988), "A finite element of a cracked prismatic beam for structural analysis", Comput. Struct., 28, 309-313. https://doi.org/10.1016/0045-7949(88)90070-3
  13. Gudmundson, P. (1983), "The dynamic behaviour of slender structures with cross-sectional cracks", J. Mech. Phys. Solids, 31, 329-345. https://doi.org/10.1016/0022-5096(83)90003-0
  14. Hsu, M.H. (2005), "Vibration analysis of edge-cracked beam on elastic foundation with axial loading using the differential quadrature method", Comput. Meth. Appl. Mech. Eng., 194, 1-17. https://doi.org/10.1016/j.cma.2003.08.011
  15. Hurty, W.C. (1965), "Dynamic analysis of structures using substructure modes", AIAA J., 3, 678-685. https://doi.org/10.2514/3.2947
  16. Irwin, G. (1960), Fracture Mechanics, Structural Mechanics, Pergamon Press.
  17. Kisa, M. (2004), "Free vibration analysis of a cantilever composite beam with multiple cracks", Compos. Sci. Technol., 64, 1391-1402. https://doi.org/10.1016/j.compscitech.2003.11.002
  18. Kisa, M. and Brandon, J.A. (2000), "Free vibration analysis of multiple open-edge cracked beams by component mode synthesis", Struct. Eng. Mech., 10, 81-92. https://doi.org/10.12989/sem.2000.10.1.081
  19. Kisa, M. and Gurel, M.A. (2007), "Free vibration analysis of uniform and stepped cracked beams with circular cross sections", Int. J. Eng. Sci., 45, 364-380. https://doi.org/10.1016/j.ijengsci.2007.03.014
  20. Kisa, M., Brandon, J.A. and Topcu, M. (1998), "Free vibration analysis of cracked beams by a combination of finite elements and component mode synthesis methods", Comput. Struct., 67, 215-223. https://doi.org/10.1016/S0045-7949(98)00056-X
  21. Krawczuk, M. (2002), "Application of spectral beam finite element with a crack and iterative search technique for damage detection", Finite Elem. Anal. Des., 38, 537-548. https://doi.org/10.1016/S0168-874X(01)00084-1
  22. Krawczuk, M. and Ostachowicz, W.M. (1993), "Transverse natural vibrations of a cracked beam loaded with a constant axial force", J. Vib. Acoust., 115, 524-528. https://doi.org/10.1115/1.2930381
  23. Kukla, S. (2009), "Free vibrations and stability of stepped columns with cracks", J. Sound Vib., 319, 1301-1311. https://doi.org/10.1016/j.jsv.2008.07.002
  24. Loya, J.A., Rubio, L. and Fernandez-Saez, J. (2006), "Natural frequencies for bending vibrations of Timoshenko cracked beams", J. Sound Vib., 290, 640-653. https://doi.org/10.1016/j.jsv.2005.04.005
  25. Mei, C., Karpenko, Y., Moody. S. and Allen, D. (2006) "Analytical approach to free and forced vibrations of axially loaded cracked Timoshenko beams", J. Sound Vib., 291, 1041-1060. https://doi.org/10.1016/j.jsv.2005.07.017
  26. Morassi, A. (2001), "Identification of a crack in a rod based on changes in a pair of natural frequencies", J. Sound Vib., 242, 577-596. https://doi.org/10.1006/jsvi.2000.3380
  27. Pandey, U.K. and Benipal, G.S. (2011), "Bilinear elastodynamical models of cracked concrete beams", Struct. Eng. Mech., 39, 465-498. https://doi.org/10.12989/sem.2011.39.4.465
  28. Patel, T.H. and Darpe, A.K. (2009), "Coupled bending-torsional vibration analysis of rotor with rub and crack", J. Sound Vib., 326, 740-752. https://doi.org/10.1016/j.jsv.2009.05.020
  29. Patil, D.P. and Maiti, S.K. (2003), "Detection of multiple cracks using frequency measurements", Eng. Fract. Mech., 70, 553-572. https://doi.org/10.1016/S0013-7944(02)00137-6
  30. Qian, G.L., Gu, S.N. and Jiang, J.S. (1990), "The dynamic behaviour and crack detection of a beam with a crack", J. Sound Vib., 138, 233-243. https://doi.org/10.1016/0022-460X(90)90540-G
  31. Rizos, P.F., Aspragathos, N. and Dimarogonas, A.D. (1990), "Identification of crack location and magnitude in a cantilever beam from the vibration modes", J. Sound Vib., 138, 381-388. https://doi.org/10.1016/0022-460X(90)90593-O
  32. Ruotolo, R., Surace, C., Crespo, P. and Storer, D. (1996), "Harmonic analysis of the vibrations of a cantilevered beam with a closing crack", Comput. Struct., 61, 1057-1074. https://doi.org/10.1016/0045-7949(96)00184-8
  33. Shifrin, E.I. and Ruotolo, R. (1999), "Natural frequencies of a beam with an arbitrary number of cracks", J. Sound Vib., 223, 409-423.
  34. Takahashi, I. (1998), "Vibration and stability of a cracked shaft simultaneously subjected to a follower force with an axial force", Int. J. Solids Struct., 35, 3071-3080. https://doi.org/10.1016/S0020-7683(97)00364-8
  35. Viola, E., Federici, L. and Nobie, L. (2001), "Detection of crack location using cracked beam element method for structural analysis", Theor. Appl. Fract. Mec., 36, 23-35. https://doi.org/10.1016/S0167-8442(01)00053-2
  36. Viola, E., Ricci, P. and Aliabadi, M.H. (2007), "Free vibration analysis of axially loaded cracked Timoshenko beam structures using the dynamic stiffness method", J. Sound Vib., 304, 124-153. https://doi.org/10.1016/j.jsv.2007.02.013
  37. Wang, Q. (2004), "A comprehensive stability analysis of a cracked beam subjected to follower compression", Int. J. Solids Struct., 41, 4875-4888. https://doi.org/10.1016/j.ijsolstr.2004.04.037
  38. Yang, J., Chen, Y., Xiang, Y. and Jia, X.L. (2008), "Free and forced vibration of cracked inhomogeneous beams under an axial force and a moving load", J. Sound Vib., 312, 166-181. https://doi.org/10.1016/j.jsv.2007.10.034
  39. Yuen, M.M.F. (1985), "A numerical study of the eigenparameters of a damaged cantilever", J. Sound Vib., 103, 301-310. https://doi.org/10.1016/0022-460X(85)90423-7
  40. Zheng, D.Y. and Fan, S.C. (2003), "Vibration and stability of cracked hollow-sectional beams", J. Sound Vib., 267, 933-954. https://doi.org/10.1016/S0022-460X(02)01605-X
  41. Zheng, D.Y. and Kessissoglou, N.J. (2004), "Free vibration analysis of a cracked beam by finite element method", J. Sound Vib., 273, 457-475. https://doi.org/10.1016/S0022-460X(03)00504-2

Cited by

  1. Analysis of cracked skeletal structures by utilizing a cracked beam-column element vol.85, 2016, https://doi.org/10.1016/j.tafmec.2016.03.008
  2. Use of vibration characteristics to predict the axial deformation of columns vol.50, pp.1, 2014, https://doi.org/10.12989/sem.2014.50.1.073
  3. Dynamic responses of a beam with breathing cracks by precise integration method vol.60, pp.5, 2016, https://doi.org/10.12989/sem.2016.60.5.891
  4. Tailoring the second mode of Euler-Bernoulli beams: an analytical approach vol.51, pp.5, 2014, https://doi.org/10.12989/sem.2014.51.5.773
  5. A Force-Based Rectangular Cracked Element vol.13, pp.4, 2012, https://doi.org/10.1142/s1758825121500472
  6. Free-vibration analysis of cracked beam with constant width and linearly varying thickness vol.11, pp.1, 2012, https://doi.org/10.1680/jemmr.21.00015a