DOI QR코드

DOI QR Code

Interaction of internal forces of exterior beam-column joints of reinforced concrete frames under seismic action

  • Zhou, Hua (Department of Civil Engineering, Hainan University) ;
  • Zhang, Zhisheng (Department of Civil Engineering, Hainan University)
  • 투고 : 2011.03.05
  • 심사 : 2012.09.28
  • 발행 : 2012.10.25

초록

Detailed analysis of internal forces of exterior beam-column joints of RC frames under seismic action is reported in this paper. A formula is derived for calculating the average joint shear from the column shears, and a formula is proposed to estimate torque in eccentric joints induced by seismic action. Average joint shear stress and strain are defined consistently for exterior joints, which can be used to establish joint shear constitutive relationship. Numerical results of shear, bending moment and torque in joints induced by seismic action are presented for a pair of concentric and eccentric exterior connections extracted from a seismically designed RC frame, and two sections located at the levels of beam bottom and top reinforcement, respectively, are identified as the critical joint sections for evaluating seismic joint behavior. A simplified analysis of the effects of joint shear and torque on the flexural strengths of the critical joint sections is made for the two connections extracted from the frame, and the results indicate that joint shear and torque induced by a strong earthquake may lead to "joint-hinging" mechanism of seismically designed RC frames.

키워드

참고문헌

  1. Alemdar, F. and Sezen, H. (2010), "Shear behavior of exterior reinforced concrete beam-column joints", Struct. Eng. Mech., 35(1), 123-126. https://doi.org/10.12989/sem.2010.35.1.123
  2. American Concrete Institute (ACI) Committee 318 (2005), Building Code Requirements for Structural Concrete (ACI 318-05) and Commentary (318R-05), Farmington Hills, Mich.
  3. American Concrete Institute (ACI) American Society of Civil Engineers (ASCE) Committee 352 (2002), "Recommendations for design of beam-column connections in monolithic reinforced concrete structures (ACI 352R-02)", Farmington Hills, Mich.
  4. Canbolat, B.B. and Wight, J.K. (2008), "Experimental investigation on seismic behavior of eccentric reinforced concrete beam-column-slab connections", ACI Struct. J., 105(2), 154-162.
  5. Fisher, M.J. and Sezen, H. (2011), "Behavior of exterior reinforced concrete beam-column joints including a new reinforcement", Struct. Eng. Mech., 40(6), 867-883. https://doi.org/10.12989/sem.2011.40.6.867
  6. Hanson, N.W. and Connor, H.W. (1967), "Seismic resistance of reinforced concrete beam-column joints", J. Struct. Div., ASCE, 93(5), 533-560.
  7. Hwang, S.J. and Lee, H.J. (2002), "Strength prediction for discontinuity regions by softened strut-and-tie model", J. Struct. Eng., 128(12), 1519-1526. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:12(1519)
  8. Jirsa, J.O. et al. (1991), Design of Beam-column Joints for Seismic Resistance, SP-123, American Concrete Institute, Farmington Hills, Mich.
  9. Kim, J. and LaFave, J.M. (2007), "Key influence parameters for the joint shear behavior of reinforced concrete (RC) beam-column connections", Eng. Struct., 29(10), 2523-2539. https://doi.org/10.1016/j.engstruct.2006.12.012
  10. Li, B. and Kulkarni, S.A. (2010), "Seismic behavior of reinforced concrete exterior wide beam-column joints", J. Struct. Eng., 136(1), 26-36. https://doi.org/10.1061/(ASCE)0733-9445(2010)136:1(26)
  11. Mansour, M. and Hsu, T.T.C. (2005), "Behavior of reinforced concrete elements under cyclic shear. II: theoretical model", J. Struct. Eng., 131(01), 54-65. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:1(54)
  12. Ministry of Construction of China (MCC) (2001a), Code for Seismic Design of Buildings, GB 50011, China. (in Chinese)
  13. Ministry of Construction of China (MCC) (2001b), Load Code for the Design of Building Structures, GB 50009, China. (in Chinese)
  14. Ministry of Construction of China (MCC) (2002), Code for Design of Concrete Structures, GB 50010, China. (in Chinese)
  15. Mitra, N. and Lowes, L.N. (2007), "Evaluation, calibration, and verification of a reinforced concrete beamcolumn joint model", J. Struct. Eng., 133(1), 105-120. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:1(105)
  16. Mostafaei, H. and Kabeyasawa, T. (2007), "Axial-shear-flexure interaction approach for reinforced concrete columns", ACI Struct. J., 104(2), 218-226.
  17. Park, R., Priestley, M.J.N. and Gill, W.D. (1982), "Ductility of square-confined concrete columns", J. Struct. Div., 108(04), 929-950.
  18. PKPM CAD Division (2008), "New functions of 2008-edition PKPM software for structural analysis and design", China Academy of Building Sciences, China.
  19. Rahal, K.N. and Collins, M.P. (2003), "Combined torsion and bending in reinforced and prestressed concrete beams", ACI Struct. J., 100(2), 157-165.
  20. Shiohara, H. (2001), "New model for shear failure of RC interior beam-column connections", J. Struct. Eng., 127(2), 152-160. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:2(152)
  21. Standards Association of New Zealand (NZS) (1995), Concrete Structures Standards (1995), Part 1: The Design of Concrete Structures, NZS 3101, New Zealand.
  22. Tavio, and Teng, S. (2004), "Effective torsional rigidity of reinforced concrete members", ACI Struct. J., 101(2), 252-260.
  23. Teng, S. and Zhou, H. (2003), "Eccentric reinforced concrete beam-column joints subjected to cyclic loading", ACI Struct. J., 100(2), 139-148.
  24. Vecchio, F.J. and Collins, M.P. (1986), "The modified compression-field theory for reinforced concrete panels subjected to shear", ACI J., 83(2), 219-231.
  25. Wong, H.F. and Kuang, J.S. (2011), "Predicting shear strength of RC exterior beam-column joints by modified rotating-angle softened-truss model", Comput. Concrete, 8(1), 59-70. https://doi.org/10.12989/cac.2011.8.1.059
  26. Zerbe, H.E. and Durrani, A.J. (1989), "Seismic response of connections in two-bay R/C frame subassemblies", J. Struct. Eng., 115(11), 2829-2844. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:11(2829)
  27. Zhou, H. (2009), "Reconsideration of seismic performance and design of beam-column joints of earthquakeresistant reinforced concrete frames", J. Struct. Eng., 135(7), 762-773. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:7(762)

피인용 문헌

  1. Computational methodology to determine the strength of reinforced concrete joint vol.1, pp.1, 2016, https://doi.org/10.12989/acd.2016.1.1.061
  2. Interaction of internal forces of interior beam-column joints of reinforced concrete frames under seismic action vol.52, pp.2, 2014, https://doi.org/10.12989/sem.2014.52.2.427
  3. Numerical Simulation of Column-End Damages of Reinforced Concrete Frames Caused by 2008 Wenchuan Earthquake in China vol.16, pp.12, 2013, https://doi.org/10.1260/1369-4332.16.12.2063
  4. Study of exterior beam-column joint with different joint core and anchorage details under reversal loading vol.46, pp.6, 2013, https://doi.org/10.12989/sem.2013.46.6.809
  5. Experimental and numerical studies on seismic behaviour of exterior beam-column joints vol.13, pp.2, 2014, https://doi.org/10.12989/cac.2014.13.2.221
  6. Coupling of nonlinear models for steel-concrete interaction in structural RC joints vol.3, pp.2, 2014, https://doi.org/10.12989/csm.2014.3.2.195
  7. Modelling beam-to-column joints in seismic analysis of RC frames vol.12, pp.1, 2012, https://doi.org/10.12989/eas.2017.12.1.119
  8. Performance Evaluation of Metallic and Synthetic Fiber Hybridization on the Cyclic Behavior of Exterior Beam-Column Joint vol.7, pp.1, 2012, https://doi.org/10.1520/acem20170137
  9. Nonlinear modeling of a RC beam-column connection subjected to cyclic loading vol.21, pp.3, 2012, https://doi.org/10.12989/cac.2018.21.3.299
  10. Shear behavior of RC interior joints with beams of different depths under cyclic loading vol.15, pp.2, 2012, https://doi.org/10.12989/eas.2018.15.2.145