DOI QR코드

DOI QR Code

Static response of 2-D functionally graded circular plate with gradient thickness and elastic foundations to compound loads

  • Behravan Rad, A. (Department of Mechanical Engineering, Karaj Branch, Islamic Azad University)
  • 투고 : 2012.01.23
  • 심사 : 2012.09.24
  • 발행 : 2012.10.25

초록

In this paper, the static behavior of bi-directional functionally graded (FG) non-uniform thickness circular plate resting on quadratically gradient elastic foundations (Winkler-Pasternak type) subjected to axisymmetric transverse and in-plane shear loads is carried out by using state-space and differential quadrature methods. The governing state equations are derived based on 3D theory of elasticity, and assuming the material properties of the plate except the Poisson's ratio varies continuously throughout the thickness and radius directions in accordance with the exponential and power law distributions. The stresses and displacements distribution are obtained by solving state equations. The effects of foundation stiffnesses, material heterogeneity indices, geometric parameters and loads ratio on the deformation and stress distributions of the FG circular plate are investigated in numerical examples. The results are reported for the first time and the new results can be used as a benchmark solution for future researches.

키워드

참고문헌

  1. Akgoz, B. and Civalek, O. (2011), "Nonlinear vibration analysis of laminated plates restingon nonlinear twoparameters elastic foundations", Steel Compos. Struct., 11(5), 403-421. https://doi.org/10.12989/scs.2011.11.5.403
  2. Alibeigloo, A. (2010), "Three-dimensional exact solution for functionally graded rectangular plate with integrated surface piezoelectric layers resting on elastic foundation", Mech. Adv. Mater. Struct., 17, 183-195. https://doi.org/10.1080/15376490903558002
  3. Ayvaz, Y. and Burak, O.C. (2008), "Free vibration analysis of plates resting on elastic foundations using modified Vlasov model", Struct. Eng. Mech., 28(6), 635-658. https://doi.org/10.12989/sem.2008.28.6.635
  4. Behravan Rad, A., Alibeigloo, A. and Malihi, S.S. (2010), "Static analysis of functionally graded annular plate resting on elastic foundation subject to an axisymmetric transverse load, based on the three dimensional theory of elasticity", J. Solid Mech., 2(3), 290-304.
  5. Celep, Z., Guler, K. and Demir, F. (2011), "Response of a completely free beam on a tensionless Pasternak foundation subjected to dynamic load", Struct. Eng. Mech., 37(1), 61-77. https://doi.org/10.12989/sem.2011.37.1.061
  6. Challamel, N. (2011), "On the post-buckling of elastic beams on gradient foundation", C. R. Mecanique, 339, 396-405.
  7. Golmakani, M.E., Kadkhodayan, M. (2011), "Nonlinear bending analysis of annular FGM plates using higherorder shear deformation plate theories", Compos. Struct., 93, 9739-982.
  8. Hosseini-Hashemi, Sh., Akhavan, H., Rokni, D.T., Daemi, N. and Alibeigloo, A. (2010), "Differential quadrature analysis of functionally graded circular and annular sector plates on elastic foundation", Mater. Des., 31(4), 1871-1880. https://doi.org/10.1016/j.matdes.2009.10.060
  9. Huang, Z.Y., Lu, C.F. and Chen, W.Q. (2008), "Benchmark solution for functionally graded thick plates resting on Winkler- Pasternak elastic foundations", Compos. Struct., 85, 95-104. https://doi.org/10.1016/j.compstruct.2007.10.010
  10. Kacar, A., Tugba Tan, H. and Kaya, M.O. (2011), "Free vibration analysis of beams on variable Winkler elastic foundation by using the differential transform method", Math. Comput. Appl., 16(3), 773-783.
  11. Li, X.Y., Ding, H.J. and Chen, W.Q. (2008), "Elasticity solutions for a transversely isotropic functionally graded circular plate subject to an axisymmetric transverse load qrk", Int. J. Solids Struct., 45(1), 191-210. https://doi.org/10.1016/j.ijsolstr.2007.07.023
  12. Lu, C.F., Lim, C.W. and Chen, W.Q. (2009), "Exact solutions for free vibrations of functionally graded thick plates on elastic foundations", Mech. Adv. Mater. Struct., 16, 576-584. https://doi.org/10.1080/15376490903138888
  13. Malekzadeh, P. (2009), "Three-dimensional free vibration analysis of thick functionally graded plates on elastic foundations", Compos. Struct., 89, 367-373. https://doi.org/10.1016/j.compstruct.2008.08.007
  14. Malekzadeh, P., Shahpari, SA. and Ziaee, HR. (2010), "Three-dimensional free vibration of thick functionally graded annular plates in thermal environment", J. Sound Vib., 329, 425-442. https://doi.org/10.1016/j.jsv.2009.09.025
  15. Mirtalaie, S.H. and Hajabasi, M.A. (2011), "Free vibration analysis of functionally graded thin annular sector plates using the differential quadrature method", Proc. IMechE Part C: J. Mech. Eng. Sci., 225, 568-583.
  16. Naderi, A. and Saidi, A.R. (2011),"Exact solution for stability analysis of moderately thick functionally graded sector plates on elastic foundation", Compos. Struct., 93, 629-638. https://doi.org/10.1016/j.compstruct.2010.08.016
  17. Nemat-Alla, M. (2003), "Reduction of thermal stresses by developing two-dimensional functionally graded materials", Int. J. Solids Struct., 40, 7339-7356. https://doi.org/10.1016/j.ijsolstr.2003.08.017
  18. Nie, G.J. and Zhong, Z. (2007), "Axisymmetric bending of two-directional functionally graded circular and annular plates", Acta Mech. Solid Sin., 20(4), 289-295. https://doi.org/10.1007/s10338-007-0734-9
  19. Nie, G.J. and Zhong, Z. (2010), "Dynamic analysis of multi-directional functionally graded annular plates", Appl. Math. Model., 34(3), 608-616. https://doi.org/10.1016/j.apm.2009.06.009
  20. Ponnusamy, P. and Selvamani, R. (2012), "Wave propagation in a generalized thermo elastic plate embedded in elastic medium", Interac. Multi. Mech., 5(1), 13-26. https://doi.org/10.12989/imm.2012.5.1.013
  21. Pradhan, S.C. and Murmu, T. (2009), "Thermo-mechanical vibration of FGM sandwich beam under variable elastic foundations using differential quadrature method", J. Sound Vib., 321, 342-362. https://doi.org/10.1016/j.jsv.2008.09.018
  22. Praveen, GN. and Reddy, J.N. (1998),"Nonlinear transient thermo elastic analysis of functionally graded ceramicmetal plates", Int. J. Solids Struct., 35 (33), 4457-4476. https://doi.org/10.1016/S0020-7683(97)00253-9
  23. Shu, C. (2000), Differential Quadrature and Its Application in Engineering, Springer, New York.
  24. Sburlati, R. and Bardella, L. (2011), "Three-dimensional elastic solutions for functionally graded circular plates", Eur. J. Mech. A-Solid., 30, 219-235. https://doi.org/10.1016/j.euromechsol.2010.12.008
  25. Wang, Y., Xu, R.Q. and Ding, H.J. (2009),"Free axisymmetric vibration of FGM plates", Appl. Math. Mech., 30(9), 1077-1082. https://doi.org/10.1007/s10483-009-0901-x
  26. Yang, J. and Shen, H.S. (2001), "Dynamic response of initially stressed functionally graded rectangular thin plates", Compos. Struct., 54, 497-508. https://doi.org/10.1016/S0263-8223(01)00122-2
  27. Yas, M.H. and Tahouneh, V. (2012), "3-D free vibration analysis of thick functionally graded annular plates on Pasternak elastic foundation via differential quadrature method (DQM)", Acta Mech., 223(1), 43-62. https://doi.org/10.1007/s00707-011-0543-6
  28. Yu, L.H. and Wang, C.Y. (2010), "Buckling mosaic of a circular plate on a partial elastic foundation", Struct. Eng. Mech., 34(1), 135-138. https://doi.org/10.12989/sem.2010.34.1.135
  29. Yun, W., Rongqiao, X. and Haojiang, D. (2010), "Three-dimensional solution of axisymmetric bending of functionally graded circular plates", Compos. Struct., 92, 1683-1693. https://doi.org/10.1016/j.compstruct.2009.12.002
  30. Zong, Z. and Zhang, Y. (2009), Advanced Differential Quadrature Methods, CRC Press, New York.

피인용 문헌

  1. Design of boundary combined footings of trapezoidal form using a new model vol.56, pp.5, 2015, https://doi.org/10.12989/sem.2015.56.5.745
  2. Thermo-elastic analysis of functionally graded circular plates resting on a gradient hybrid foundation vol.256, 2015, https://doi.org/10.1016/j.amc.2015.01.026
  3. Three dimensional static and dynamic analysis of two dimensional functionally graded annular sector plates vol.51, pp.6, 2014, https://doi.org/10.12989/sem.2014.51.6.1067
  4. Dynamic behavior of a functionally graded plate resting on Winkler elastic foundation and in contact with fluid vol.50, pp.1, 2014, https://doi.org/10.12989/sem.2014.50.1.053
  5. Three-dimensional magneto-elastic analysis of asymmetric variable thickness porous FGM circular plates with non-uniform tractions and Kerr elastic foundations vol.125, 2015, https://doi.org/10.1016/j.compstruct.2015.02.049
  6. Design of isolated footings of circular form using a new model vol.52, pp.4, 2014, https://doi.org/10.12989/sem.2014.52.4.767
  7. Thermo-magneto-elasticity analysis of variable thickness annular FGM plates with asymmetric shear and normal loads and non-uniform elastic foundations vol.16, pp.3, 2016, https://doi.org/10.1016/j.acme.2016.02.006
  8. A comparative study for design of boundary combined footings of trapezoidal and rectangular forms using new models vol.6, pp.4, 2017, https://doi.org/10.12989/csm.2017.6.4.417
  9. Bending of FGM rectangular plates resting on non-uniform elastic foundations in thermal environment using an accurate theory vol.27, pp.3, 2018, https://doi.org/10.12989/scs.2018.27.3.311
  10. Effect of homogenization models on stress analysis of functionally graded plates vol.67, pp.5, 2018, https://doi.org/10.12989/sem.2018.67.5.527
  11. A novel hyperbolic shear deformation theory for the mechanical buckling analysis of advanced composite plates resting on elastic foundations vol.30, pp.1, 2012, https://doi.org/10.12989/scs.2019.30.1.013
  12. A novel four-unknown integral model for buckling response of FG sandwich plates resting on elastic foundations under various boundary conditions using Galerkin's approach vol.21, pp.5, 2012, https://doi.org/10.12989/gae.2020.21.5.471
  13. Thermoporoelasticity analysis of variable thickness and elastically restrained functionally graded auxetic metamaterial circular plate resting on an auxetic material circular plate vol.235, pp.16, 2021, https://doi.org/10.1177/0954406220958432