Structural Engineering and Mechanics

  • 제44권1호
  • /
  • Pages.109-125
  • /
  • 2012
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Post-buckling analysis of Timoshenko beams with temperature-dependent physical properties under uniform thermal loading

  • Akbas, Seref Doguscan (Department of Civil Engineering, Yildiz Technical University, Davutpasa Campus) ;
  • Kocaturk, Turgut (Department of Civil Engineering, Yildiz Technical University, Davutpasa Campus)
  • 투고 : 2012.03.14
  • 심사 : 2012.09.24
  • 발행 : 2012.10.10
⟨ 이전 논문 다음 논문 ⟩

초록

Post-buckling behavior of Timoshenko beams subjected to uniform temperature rising with temperature dependent physical properties are studied in this paper by using the total Lagrangian Timoshenko beam element approximation. The beam is clamped at both ends. In the case of beams with immovable ends, temperature rise causes compressible forces end therefore buckling and post-buckling phenomena occurs. It is known that post-buckling problems are geometrically nonlinear problems. Also, the material properties (Young's modulus, coefficient of thermal expansion, yield stress) are temperature dependent: That is the coefficients of the governing equations are not constant in this study. This situation suggests the physical nonlinearity of the problem. Hence, the considered problem is both geometrically and physically nonlinear. The considered highly non-linear problem is solved considering full geometric non-linearity by using incremental displacement-based finite element method in conjunction with Newton-Raphson iteration method. The beams considered in numerical examples are made of Austenitic Stainless Steel (316). The convergence studies are made. In this study, the difference between temperature dependent and independent physical properties are investigated in detail in post-buckling case. The relationships between deflections, thermal post-buckling configuration, critical buckling temperature, maximum stresses of the beams and temperature rising are illustrated in detail in post-buckling case.

키워드

참고문헌

  1. Akbas, S.D. (2012), "Post-buckling behaviour of functionally graded beams under the influence of temperature", Ph.D. Thesis, Institute of Science at Yildiz Technical University Istanbul.
  2. Akbas, S.D. and Kocaturk, T. (2011), "Post-buckling analysis of a simply supported beam under uniform thermal loading", Sci. Res. Essays, 6(4), 1135-1142.
  3. Aristizabal-Ochoa, J.D. (2007), "Large deflection and post-buckling behavior of Timoshenko beam-columns with semi-rigid connections including shear and axial effects", J. Eng. Struct., 29(6), 991-1003. https://doi.org/10.1016/j.engstruct.2006.07.012
  4. ASME Code Cases : Nuclear Components (1992), Case N-47-30, Section III, Division 1, ASME Boiler and Pressure Vessel Code.
  5. Chen, B., Gu, Y., Zhao, G., Lin, W., Chang T.Y.P. and Kuang, J.S. (2003), "Design optimization for structural thermal buckling", J. Therm. Stresses, 26(5), 479-494. https://doi.org/10.1080/713855939
  6. Coffin, D.W. and Bloom, F. (1999), "Elastica solution for the hygrothermal buckling of a beam", Int. J. Nonlin. Mech., 34(5), 935-947. https://doi.org/10.1016/S0020-7462(98)00067-5
  7. Detail of the ITER Outline Design Report (1994), The ITER Machine, Vol 2, San Diego.
  8. Parente, E. and de Sousa, J.M.S. (2008), "Design sensitivity analysis of nonlinear structures subjected to thermal loads", Comput. Struct., 86(11-12), 1369-1384. https://doi.org/10.1016/j.compstruc.2007.08.002
  9. Felippa, C.A., Retrieved March (2012), "Notes on nonlinear finite element methods", http://www.colorado.edu/engineering/cas/courses.d/NFEM.d/NFEM.Ch10.d/NFEM.Ch10.pdf
  10. Gauss, R.C. and Antman, S.S. (1984), "Large thermal buckling of non-uniform beam and plates", Int. J. Solids Struct., 20(11-12), 979-1000. https://doi.org/10.1016/0020-7683(84)90085-4
  11. Gupta, R.K., Gunda, J.B., Janardhan, G.R. and Rao, G.V. (2009), "Comparative study of thermal post-buckling analysis of uniform slender & shear flexible columns using rigorous finite element and intutive formulations", Int. J. Mech. Sci., 51(3), 204-212. https://doi.org/10.1016/j.ijmecsci.2009.01.002
  12. Gupta, R.K., Gunda, J.B., Janardhan, G.R. and Rao, G.V. (2010a), "Post-buckling analysis of composite beams: Simple and accurate closed-form expressions", Compos. Struct., 92(3), 1947-1956. https://doi.org/10.1016/j.compstruct.2009.12.010
  13. Gupta, R.K., Gunda, J.B., Janardhan, G.R. and Rao, G.V. (2010b), "Thermal post-buckling analysis of slender columns using the concept of coupled displacement field", Int. J. Mech. Sci., 52(4), 590-594. https://doi.org/10.1016/j.ijmecsci.2009.12.005
  14. Incropera, F. and DeWitt, D. (1985), Fundamentals of Heat and Mass Transfer, 2nd Edition, John Wiley.
  15. ITER Documentation Series, No 29 (1991), Blanket, Shield Design and Material Data Base, IAEA, Vienna.
  16. Jekot, T. (1996), "Non-linear problems of thermal buckling of a beam", J. Therm. Stresses, 19, 359-369. https://doi.org/10.1080/01495739608946180
  17. Kocaturk, T. and Akbas, S.D. (2011), "Post-buckling analysis of Timoshenko beams with various boundary conditions under non-uniform thermal loading", Struct. Eng. Mech., 40(3), 347-371. https://doi.org/10.12989/sem.2011.40.3.347
  18. Kocaturk, T. and Akbas, S.D. (2012), "Post-buckling analysis of Timoshenko beams made of functionally graded material under thermal loading", Struct. Eng. Mech., 41(6), 775-789. https://doi.org/10.12989/sem.2012.41.6.775
  19. Li, S.R. (2000), "Thermal post-buckling of asymmetrically supported elastic rods", Eng. Mech., 17(5), 115-119.
  20. Li, S. and Cheng, C. (2000), "Analysis of thermal post- buckling of heated elastic rods", Appl. Math. Mech. (English Ed.), 21(2), 133-140. https://doi.org/10.1007/BF02458513
  21. Li, S., Zhou, Y.H. and Zheng, X. (2002), "Thermal post- buckling of a heated elastic rod with pinned-fixed ends", J. Therm. Stresses, 25(1), 45-56. https://doi.org/10.1080/014957302753305862
  22. Li, S. and Zhou, Y. (2001), "Thermal post-buckling of rods with variable cross sections", Proceedings of the Fourth International Congress on Thermal Stresses, Osaka, Japan.
  23. Li, S.R., Cheng, C.J. and Zhou, Y.H. (2003), "Thermal post-buckling of an elastic beams subjected to a transversely non-uniform temperature rising", Appl. Math. Mech. (English Ed.), 24(5), 514-520. https://doi.org/10.1007/BF02435863
  24. Li, S. and Zhou, Y. (2003), "Geometrically nonlinear analysis of Timoshenko beams under thermomechanical loadings", J. Therm. Stresses, 26(9), 861-872. https://doi.org/10.1080/01495730306295
  25. Li, S. and Song, X. (2006), "Large thermal deflections of Timoshenko beams under transversely non-uniform temperature rise", Mech. Res. Commun., 33(1), 84-92. https://doi.org/10.1016/j.mechrescom.2005.06.004
  26. Rao, G.V. and Raju, K.K. (1984), "Thermal postbuckling of columns", AIAA J., 22(6), 850-851. https://doi.org/10.2514/3.8695
  27. Song, X. and Li, S.R. (2007), "Thermal buckling and post-buckling of pinned-fixed Euler-Bernoulli beams on an elastic foundation", Mech. Res. Commun., 34(2), 164-171. https://doi.org/10.1016/j.mechrescom.2006.06.006
  28. Vaz, M.A. and Solano, R.F. (2003), "Postbuckling analysis of slender elastic rods subjected to uniform thermal loads", J. Therm. Stresses, 26(9), 847-860. https://doi.org/10.1080/01495730306293
  29. Vaz, M.A. and Solano, R.F. (2004), "Thermal post-buckling of slender elastic rods with hinged ends constrained by a linear spring", J. Therm. Stresses, 27(4), 367-380. https://doi.org/10.1080/01495730490427591
  30. Vaz, M.A., Nascimento, M.S. and Solano, R.F. (2007), "Initial post-buckling of elastic rods subjected to thermal loads and resting on an elastic foundation", J. Therm. Stresses, 30(4), 381-393. https://doi.org/10.1080/01495730601146352
  31. Vaz, M.A., Cyrino, J.C.R. and Neves, A.C. (2010), "Initial thermo-mechanicalpost-buckling of beams with temperature-dependent physical properties", Int. J. Nonlin. Mech., 45(3), 256-262. https://doi.org/10.1016/j.ijnonlinmec.2009.11.006
  32. Yu, Y.P. and Sun, Y.H. (2012), "Analytical approximate solutions for large post-buckling response of a hygrothermal beam", Struct. Eng. Mech., 43(2), 211-223. https://doi.org/10.12989/sem.2012.43.2.211
  33. Zienkiewicz, O.C. and Taylor, R.L. (2000), The Finite Element Method, Fifth Edition, Volume 2: Solid Mechanics, Butterworth-Heinemann, Oxford.

피인용 문헌

  1. Post-Buckling Analysis of Edge Cracked Columns Under Axial Compression Loads vol.08, pp.08, 2016, https://doi.org/10.1142/S1758825116500861
  2. Large post-buckling behavior of Timoshenko beams under axial compression loads vol.51, pp.6, 2014, https://doi.org/10.12989/sem.2014.51.6.955
  3. Thermal post-buckling analysis of functionally graded beams with temperature-dependent physical properties vol.15, pp.5, 2013, https://doi.org/10.12989/scs.2013.15.5.481
  4. A spectral element model for thermal effect on vibration and buckling of laminated beams based on trigonometric shear deformation theory vol.133, 2017, https://doi.org/10.1016/j.ijmecsci.2017.07.059
  5. Post-buckling responses of functionally graded beams with porosities vol.24, pp.5, 2017, https://doi.org/10.12989/scs.2017.24.5.579
  6. Nonlinear static analysis of functionally graded porous beams under thermal effect vol.6, pp.4, 2017, https://doi.org/10.12989/csm.2017.6.4.399
  7. Post-buckling responses of a laminated composite beam vol.26, pp.6, 2012, https://doi.org/10.12989/scs.2018.26.6.733
  8. Geometrically nonlinear analysis of a laminated composite beam vol.66, pp.1, 2012, https://doi.org/10.12989/sem.2018.66.1.027
  9. Large deflection analysis of a fiber reinforced composite beam vol.27, pp.5, 2012, https://doi.org/10.12989/scs.2018.27.5.567
  10. Geometrically nonlinear analysis of functionally graded porous beams vol.27, pp.1, 2012, https://doi.org/10.12989/was.2018.27.1.059
  11. Thermal post-buckling analysis of a laminated composite beam vol.67, pp.4, 2018, https://doi.org/10.12989/sem.2018.67.4.337
  12. Hygro-thermal post-buckling analysis of a functionally graded beam vol.8, pp.5, 2019, https://doi.org/10.12989/csm.2019.8.5.459
  13. Dynamic responses of laminated beams under a moving load in thermal environment vol.35, pp.6, 2012, https://doi.org/10.12989/scs.2020.35.6.729