DOI QR코드

DOI QR Code

Implementation of a micro-meso approach for progressive damage analysis of composite laminates

  • Hosseini-Toudeshky, H. (Department of Aerospace Engineering, Amirkabir University of Technology) ;
  • Farrokhabadi, A. (Department of Aerospace Engineering, Semnan University) ;
  • Mohammadi, B. (School of Mechanical Engineering, Iran University of Science and Technology)
  • 투고 : 2012.02.04
  • 심사 : 2012.08.09
  • 발행 : 2012.09.10

초록

The mismatch of ply orientations in composite laminates can cause high interlaminar stress concentrations near the free edges. Evaluation of these interlaminar stresses and their role in the progressive damage analysis of laminates is desirable. Recently, the authors developed a new method to relate the physically based micromechanics approach with the meso-scale CDM considering matrix cracking and induced delamination. In this paper, the developed method is applied for the analysis of edge effects in various angle-ply laminates such as $[10/-10]_{2s}$, $[30/-30]_{2s}$ and $[45/-45]_{2s}$ and comparing the results with available traditional CDM and experimental results. It is shown that the obtained stress-strain behaviors of laminates are in good agreement with the available experimental results and even in better agreement than the traditional CDM results. Variations of the stresses and stiffness components through the laminate thickness and near the free edges are also computed and compared with the available CDM results.

키워드

참고문헌

  1. Abu Al-Rub, R.K. and Voyiadjis, G.Z. (2003), "On the coupling of anisotropic damage and plasticity models for ductile materials", Int. J. Solids Struct., 40, 2611-2643. https://doi.org/10.1016/S0020-7683(03)00109-4
  2. Barbero, E. and De Vivo, L. (2001), "A constitutive model for elastic damage in fiber-reinforced PMC lamina", Int. J. Damage Mech., 10, 73-93. https://doi.org/10.1106/6PQ6-31JW-F69K-74LU
  3. Camanho, P.P., Maimi, P. and Davila, C.G. (2007), "Prediction of size effects in notched laminates using continuum damage mechanics", Comp. Sci. Technol., 67, 2715-2727. https://doi.org/10.1016/j.compscitech.2007.02.005
  4. Chaboche, J.L. and Maire, J.F. (2002), "A new micromechanics based CDM model and its application to CMC's", Aerosp. Sci. Technol. 6, 131-145. https://doi.org/10.1016/S1270-9638(02)01154-9
  5. Falzon, B.G. and Apruzzese, P. (2011), "Numerical analysis of intralaminar failure mechanisms in composite structures. Part I: FE implementation", Compos. Struct., 93(2), 1039-1046. https://doi.org/10.1016/j.compstruct.2010.06.028
  6. Farrokhabadi, A., Hosseini-Toudeshky, H. and Mohammadi, B., "Development of a damage analysis method in laminated composites using finite fracture toughness of single lamina", Mech. Adv. Mater. Struct. (in press)
  7. Farrokhabadi, A., Hosseini-Toudeshky, H. and Mohammadi, B. (2010), "Damage analysis of laminated composites using a new coupled micro-meso approach", Fatigue Fract. Eng. Mater. Struct., 33, 420-435. https://doi.org/10.1111/j.1460-2695.2010.01456.x
  8. Farrokhabadi, A., Hosseini-Toudeshky, H. and Mohammadi, B. (2011), "A generalized micromechanical approach for the analysis of transverse crack and induced delamination in composite laminates", Comput. Struc., 93, 443-455. https://doi.org/10.1016/j.compstruct.2010.08.036
  9. Hassan, N.M. and Batra, R.C. (2008), "Modeling damage in polymeric composites", Compos. Part B: Eng., 39(1), 66-82. https://doi.org/10.1016/j.compositesb.2007.02.001
  10. Herakovich, C.T. (1998), Mechanics of Fibrous Composites, John Wiley, New York.
  11. Nguyen, V.T. and Caron, J.F. (2006), "A new finite element for free edge effect analysis in laminated composites", Comput. Struct., 84 (22-23), 1538-1546. https://doi.org/10.1016/j.compstruc.2006.01.038
  12. Mishnaevsky, J.R. and Brøndsted, P. (2009), "Micromechanical modeling of damage and fracture of unidirectional fiber reinforced composites: A review", Comput. Mater. Sci., 44, 1351-1359. https://doi.org/10.1016/j.commatsci.2008.09.004
  13. Kant, T. and Swaminathan, K. (2000), "Estimation of transverse/interlaminar stresses in laminated composites / a selective review and survey of current developments", Compos. Struct., 49, 65-75. https://doi.org/10.1016/S0263-8223(99)00126-9
  14. Ladeveze, P., Allix, O., Deu, J.F. and Leveque, D. (2000), "A mesomodel for localization and damage computation in laminates", Comput. Meth. Appl. Mech. Eng., 183, 105-122. https://doi.org/10.1016/S0045-7825(99)00214-5
  15. Ladeveze, P., Lubineau, G. and Marsal, D. (2006), "Towards a bridge between the micro- and mesomechanics of delamination for laminated composites", Compos. Sci. Technol., 66, 698-712. https://doi.org/10.1016/j.compscitech.2004.12.026
  16. Lee, J.W., Allen, D.H. and Harris, C.E. (1989), "Internal state variable approach for predicting stiffness reductions in fibrous laminated composites with matrix cracks", J. Compos. Mater., 23, 1273-1291. https://doi.org/10.1177/002199838902301205
  17. Liu, P.F. and Zheng, J.Y. (2008), "Progressive failure analysis of carbon fiber/epoxy composite laminates using continuum damage mechanics", Mater. Sci. Eng. A, 485, 711-717. https://doi.org/10.1016/j.msea.2008.02.023
  18. Lonetti, P., Zinno, R., Greco, F. and Barbero, E. (2003), "Interlaminar damage model for polymer matrix composites", J. Compos. Mater., 37, 1485-1504. https://doi.org/10.1177/0021998303034741
  19. Mohammadi, B., Hosseini-Toudeshky, H. and Sadr-Lahijani, M.H. (2009), "Failure analysis of laminates by implementation of continuum damage mechanics in layer-wise finite element theory", Struct. Eng. Mech., 33(6), 657-674. https://doi.org/10.12989/sem.2009.33.6.657
  20. Mohammadi, B., Hosseini-Toudeshky, H. and Sadr-Lahijani, M.H. (2008), "Progressive damage analysis of angle-ply laminates exhibiting free edge effects continuum damage mechanics with layer-wise finite element method", Fatigue Fract. Eng. Mater. Struct., 31, 549-568. https://doi.org/10.1111/j.1460-2695.2008.01242.x
  21. Raghavan, P. and Ghosh, S. (2005), "A continuum damage mechanics model for unidirectional composites undergoing interfacial debonding", Mech. Mater., 37(9), 955-979.
  22. Varna, J. (2008), "Physical interpretation of parameters in synergistic continuum damage mechanics model for laminates", Compos. Sci. Technol., 68, 2592-2600. https://doi.org/10.1016/j.compscitech.2008.04.037
  23. Voyiadjis, G.Z. and Kattan, P.I. (1999), Advances in Damage Mechanics: Metals and Metal Matrix Composites, Elsevier, Amsterdam.
  24. Voyiadjis, G.Z. and Park, T. (1999), "Kinematics description of damage for finite strain plasticity", J. Eng. Sci., 37, 803-830. https://doi.org/10.1016/S0020-7225(98)00100-1
  25. Voyiadjis, G.Z. and Deliktas, B. (2000), "A coupled anisotropic damage model for the inelastic response of composite materials", Comput. Meth. Appl. Mech. Eng., 183, 159-199. https://doi.org/10.1016/S0045-7825(99)00218-2
  26. Voyiadjis, G.Z., Deliktas, B. and Aifantis, E.C. (2001), "Multiscale analysis of multiple damage mechanics coupled with inelastic behavior of composite materials", J. Eng. Mech., 127 (7), 636-645. https://doi.org/10.1061/(ASCE)0733-9399(2001)127:7(636)
  27. William, K.V., Varizi, R. and Poursartip, A. (2003), "A physically based continuum damage mechanics model for thin laminated composite structures", Int. J. Solids Struct., 40, 2267-2300. https://doi.org/10.1016/S0020-7683(03)00016-7

피인용 문헌

  1. Experimental and multi-scale analyses of open-celled aluminum foam with hole under compressive quasi-static loading vol.695, 2017, https://doi.org/10.1016/j.jallcom.2016.10.129
  2. Prediction of the Stress–Strain Behavior of Open-Cell Aluminum Foam under Compressive Loading and the Effects of Various RVE Boundary Conditions vol.27, pp.5, 2018, https://doi.org/10.1007/s11665-018-3329-3
  3. Damage behaviour of laminated composites during fatigue loading vol.43, pp.4, 2020, https://doi.org/10.1111/ffe.13152