Structural Engineering and Mechanics

  • 제43권3호
  • /
  • Pages.321-336
  • /
  • 2012
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A new numerical modelling for evaluating the stress intensity factors in 3-D fracture analysis

  • Cao, Zongjie (Department of Aviation Mechanical Engineering, Aviation University of Air Force) ;
  • Liu, Yongyu (Department of Aviation Mechanical Engineering, Aviation University of Air Force)
  • 투고 : 2012.01.13
  • 심사 : 2012.06.04
  • 발행 : 2012.08.10
⟨ 이전 논문 다음 논문 ⟩

초록

As an improvement on the isoparametric element method, the derivation presented in this paper is close to that done by Wang (1990) for the 2-D finite element. We extend this idea to solve 3-D crack problems in this paper. A new displacement modelling is constructed with local solutions of three-dimensional cracks and a quasi-compatible isoparametric element for three-dimensional fracture mechanics analysis is presented. The stress intensity factors can be solved directly by means of the present method without any post-processing. A new method for calculating the stress intensity factors of three-dimensional cracks with complex geometries and loads is obtained. Numerical examples are given to demonstrate the validity of the present method. The accuracy of the results obtained by the proposed element is demonstrated by solving several crack problems. The results illustrate that this method not only saves much calculating time but also increases the accuracy of solutions. Because this quasi-compatible finite element of 3-D cracks contains any singularities and easily meets the requirement of compatibility, it can be easily implemented and incorporated into existing finite element codes.

키워드

참고문헌

  1. Atluri, S.N., Kobayashi, A.S. and Nakagaki, M. (1975), "An assumed displacement hybrid finite element method for fracture mechanics", Int. J. Fract., 11, 257-271. https://doi.org/10.1007/BF00038893
  2. Barsoum, R.S. (1976), "On the use of isoparametric finite elements in linear fracture mechanics", Int. J. Numer. Meth. Eng., 10, 25-37. https://doi.org/10.1002/nme.1620100103
  3. Bloom, J.M. and Fossen, D.B. (1976), "An evaluation of the 20-node quadratic isoparametric singularity brick element", Int. J. Fract., 12, 161-163.
  4. Bradford, L.G., Dong, S.B., Nicol, D.A.C. and Westmann, R.A. (1984), "A central crack element in fracture mechanics", Int. J. Fract. Mech., 24, 197-207. https://doi.org/10.1007/BF00032683
  5. Cao, Z.J. and Kuang, Z.B. (2004), "A singular finite element modelling of blunt crack problems and numerical analysis", ACTA Aeronautica et Astronautica Sinica, 25(5), 470-472.
  6. Cao, Z.J. and Kuang, Z.B. (2008), "A finite element modelling for directly determining intensity factors of piezoelectric materials with cracks", Int. J. Fract., 149, 67-85. https://doi.org/10.1007/s10704-008-9235-1
  7. Chai, G.Z. and Zhang, K.D. (2000), "A hybrid boundary element method for three dimensional fracture analysis", Int. J. Fract., 104, 241-258.
  8. Chen, Y.Z. (2011), "A numerical solution for a finite internally cracked plate using hybrid crack element method", Struct. Eng. Mech., 40(6), 813-827. https://doi.org/10.12989/sem.2011.40.6.813
  9. Chen, Y.Z. and Lin, X.Y. (2010), "Numerical solution of singular integral equation for multiple curved branchcracks", Struct. Eng. Mech., 34(1), 85-95. https://doi.org/10.12989/sem.2010.34.1.085
  10. Delliou, P.L. and Barthelet, B. (2007), "New stress intensity factor solutions for an elliptical crack in a plate", Nucl. Eng. Des., 237, 1395-1405. https://doi.org/10.1016/j.nucengdes.2006.07.014
  11. Dong, C.Y., Cheung, Y.K. and Lo, S.H. (2002), "A regularized domain integral formulation for inclusion problems of various shapes by equivalent inclusion method", Comput. Meth. Appl. Mech. Eng., 191, 3411-3421. https://doi.org/10.1016/S0045-7825(02)00261-X
  12. Fan, S.C., Liu, X. and Lee, C.K. (2004), "Enriched partition-of-unity finite element method for stress intensity factors at crack Tips", Comput. Struct., 82, 445-461. https://doi.org/10.1016/j.compstruc.2003.10.019
  13. Isida, M., Hirota, K., Noguchi, H. and Yoshida, T. (1985), "Two parallel elliptical cracks in an infinite solid subjected to tension", Int. J. Fract., 17, 31-48.
  14. Kassir, M.K. and Sih, G.C. (1966), "Three dimensional stress distribution around an elliptical crack under arbitrary loading", J. Appl. Mech., 33, 601-611. https://doi.org/10.1115/1.3625127
  15. Kuang, Z.B. and Ma, F.S. (2002), The Crack Tip Fields, Xi'an Jiaotong University Publishing House, Xi'an.
  16. Miyazaki, N., Kaneko, H. and Munakata, T. (1989), "Stress intensity analysis of enteracting elliptical cracks using line-spring boundary element method", Int. J. Ves. Pip., 38, 1-14. https://doi.org/10.1016/0308-0161(89)90127-0
  17. Newman, J.C. and Raju, I.S. (1979), "Stress intensity factors for a wide range of semi-elliptical surface cracks in finite-thickness plates", Eng. Fract. Mech., 11, 817-829. https://doi.org/10.1016/0013-7944(79)90139-5
  18. Nik Long, N.M.A. and Eshkuvatov, Z.K. (2009), "Hypersingular integral equation for multiple curved cracks problem in plane elasticity", Int. J. Solids Struct., 46, 2611-2617. https://doi.org/10.1016/j.ijsolstr.2009.02.008
  19. Parsons, I.D. and Hall, J.F. (1989), "A finite element investigation of the elastostatic state near a three dimensional edge crack", Eng. Fract. Mech., 33(1), 45-63. https://doi.org/10.1016/0013-7944(89)90054-4
  20. Peng, D., Jones, R. and Pitt, S. (2002), "Implementation of a new algorithm for evaluating 3D fracture analysis", Int. J. Fract., 113, 57-75. https://doi.org/10.1023/A:1013771817338
  21. Sallam, H.E.M., El-Sisi, A.E.A., Matar, E.B. and El-Hussieny, O.M. (2011), "Effect of clamping force and friction coefficient on stress intensity factor of cracked lapped joints", Eng. Fail. Anal., 18, 1550-1558. https://doi.org/10.1016/j.engfailanal.2011.05.015
  22. Tracey, D.M. (1974), "Finite elements for three-dimensional elastic crack analysis", Nucl. Eng. Des., 26, 282-290. https://doi.org/10.1016/0029-5493(74)90063-6
  23. Tracey, D.M. (1976), "Discussion of 'on the use of isoparametric finite elements in linear fracture mechanics' by RS Barsoum", Int. J. Numer. Meth. Eng., 10, 401-403. https://doi.org/10.1002/nme.1620100210
  24. Wang, X., Lambert, S.B. and Glink, G. (1998), "Approximate weight functions for embedded elliptical cracks", Eng. Fract. Mech., 59, 381-392. https://doi.org/10.1016/S0013-7944(97)00139-2
  25. Wang, Z.C., Zhang, L.S. and Liu, C.T. (1990), "A new formulated of a quasi-compatible finite element and Its application in fracture mechanics", Eng. Fract. Mech., 37(6), 1195-1201. https://doi.org/10.1016/0013-7944(90)90061-K
  26. Xiao, Q.Z. and Karihaloo, B.L. (2003), "Direct evaluation of accurate coefficients of the linear elastic crack tip asymptotic field", Fatigue Fract. Eng. Nater Struct., 26, 719-729. https://doi.org/10.1046/j.1460-2695.2003.00648.x
  27. Yamamoto, Y. and Sumi, Y. (1976), "Stress intensity factors for three-dimensional cracks", 14th Int. Cong. on Theor. and Appl. Mech., Delft.
  28. Zhao, J.F., Xie, L.Y., Liu, J.Z and Zhao, Q. (2012), "A method for stress intensity factor calculation of infinite plate containing multiple hole-edge cracks", Int. J. Fatig., 35, 2-9. https://doi.org/10.1016/j.ijfatigue.2011.06.001

피인용 문헌

  1. A new formulation of the J integral of bonded composite repair in aircraft structures vol.58, pp.5, 2016, https://doi.org/10.12989/sem.2016.58.5.745
  2. Hydraulic fracturing experiments of highly deviated well with oriented perforation technique vol.6, pp.2, 2014, https://doi.org/10.12989/gae.2014.6.2.153
  3. Feedback control design for intelligent structures with closely-spaced eigenvalues vol.52, pp.5, 2014, https://doi.org/10.12989/sem.2014.52.5.903
  4. Perforation optimization of hydraulic fracturing of oil and gas well vol.5, pp.5, 2013, https://doi.org/10.12989/gae.2013.5.5.463
  5. Probabilistic elastic-plastic analysis of repaired cracks with bonded composite patch vol.20, pp.6, 2016, https://doi.org/10.12989/scs.2016.20.6.1173
  6. Probabilistic Fracture Mechanics for Analysis of Longitudinal Cracks in Pipes Under Internal Pressure vol.18, pp.6, 2018, https://doi.org/10.1007/s11668-018-0564-8
  7. Surface crack growth prediction under fatigue load using probabilistic S-version finite element model vol.40, pp.11, 2018, https://doi.org/10.1007/s40430-018-1442-8
  8. Effect of the corrosion of plate with double cracks in bonded composite repair vol.64, pp.3, 2017, https://doi.org/10.12989/sem.2017.64.3.323